Drill America 3/16 in. Carbide Tipped Glass and Tile Drill Bit
$10.80
Accomplish all your difficult drilling tasks effortlessly with the choice of this amazing Drill America Carbide Tipped Glass and Tile Drill Bit
In stock
Description
Drill America DWDGD Series glass and tile drill provide smooth, accurate drilling in ceramic tile, marble, china and glass. Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness. Available with polished finish. Round shanks allow use with a wide variety of tool holding systems.
- Provide smooth, accurate drilling in ceramic tile, marble, China and glass
- Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness
- Comes with polished finish
- Round shanks allow use with a wide variety of tool holding systems
- Spear-pointed glass and tile bit
- For use in drilling ceramic tile, marble, china and glass
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1.00 × 4.00 × 1.00 in |
| Assembled Depth (in.) | 1 in |
| Assembled Height (in.) | 1 in |
| Assembled Width (in.) | 1 in |
| Bit Length (in.) | 2.5 |
| Bit Material | Carbide |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Glass |
| Model | DWDGD3/16 |
| Self-Feeding | No |
| Shank Diameter | 3/16 in |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (25)
25 reviews for Drill America 3/16 in. Carbide Tipped Glass and Tile Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Bosch 20 in. x 3 in. Hammer Steel 1-1/8 in. Hex Chisel for Demolition Hammer
Model# HS2164
Drill Bits
Model# 282269
Drill Bits
Model# DW2045 G
Drill Bits
Model# 49-56-0247
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 48-28-1010
Drill Bits
Model# DW2735P
Kaylie Bogisich (verified owner) –
This glass and tile drill bit works surprisingly well from what I can tell. I’ve never used a drill bit to drill a whole in glass so I don’t have anything to compare it too. I got it to drill some drain holes in some glass flower pots and it work well. Drilled a nice hole and didn’t break or chip the glass. Definitely recommend wearing safety glasses and a mask. Recommend for anyone needing to drill holes in glass
Natalia Brown (verified owner) –
Carbide tip drill bit that leaves a clean one quarter inch cut. The bit was a little shorter than I expected, measuring only about two and one half inches long. The bit measures one quarter inch wide.In the past, I’ve used cement bits to cut through tile. It was always difficult to break through the surface and then keeping the bit straight. Not so with this bit. I tested it against a tile and it easily broke the surface and left a clean cut.
Daphney Hegmann (verified owner) –
Goal was to drill holes through tiles to screw few things. I tried brick & masonry bits with no luck, until I found this. Purchased this one & picked it up at a local home depot store. Nice fast shipping. First, I tried it on regular drill mode, it was challenging. Turned it onto hammer mode & with little bit of water presence drill bit started going through like a butter.So, my recommendation is when you use this on tiles just add little bit of water or dip the bit in cold water time to time, it will go through like butter.
Jamar Graham (verified owner) –
Carbide Tipped 1/4 ” Glass and Tile Drill Bit. It works great when you want to installcertain fixtures in the bathroom walls and you can’t drill thru the ceramic tiles or you have a project that involves drilling thru glass. This 1/4 ” bit is what you need, I had no problem drilling thru ceramic or glass but, you need a good drill to really drill thru with no problem, maybe a high speed drill, good little piece to have in the tool box if you’re into fixing things.
Carolyn Brakus (verified owner) –
Drill bit was received and used next day, wasn’t quite sure how it would perform. While the shank on the bit is shorter than I prefer it is sufficient for the job intended for most jobs. I was apprehensive that the bit might “slide around” upon first starting however it performed excellently. One point of caution would be that insure that what you are drilling into is securely held down. A uneven base can result in cracking and breaking of the tile or glass being drilled.