Drill America 3/8 in. Carbide Tipped Glass and Tile Drill Bit
$12.55
Get the best and ultimate addition to your drilling application by selecting this Drill America #75 Carbide Tipped Glass and Tile Drill Bit
In stock
Description
Drill America DWDGD Series glass and tile drill provide smooth, accurate drilling in ceramic tile, marble, china, and glass. Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness. Available with polished finish. Round shanks allow use with a wide variety of tool holding systems.
- Provide smooth, accurate drilling in ceramic tile, marble, China and glass
- Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness
- Comes with polished finish
- Round shanks allow use with a wide variety of tool holding systems
- Spear-pointed glass and tile bit
- For use in drilling ceramic tile, marble, china, and glass
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1.00 × 4.00 × 1.00 in |
| Assembled Depth (in.) | 1 in |
| Assembled Height (in.) | 1 in |
| Assembled Width (in.) | 1 in |
| Bit Length (in.) | 3 |
| Bit Material | Carbide |
| Drill Bit Type | Specialty |
| Drill Bit Type(s) Included | Specialty |
| Individual/Set | Individual |
| Material Application | Glass |
| Model | DWDGD3/8 |
| Self-Feeding | No |
| Shank Diameter | 3/8 in |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
Reviews (25)
25 reviews for Drill America 3/8 in. Carbide Tipped Glass and Tile Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# FB-005
Drill Bits
Model# DW2535
Drill Bits
Milwaukee 18 in. x 7/16 in. QUIK-LOK Universal Extension Bit
Model# 48-28-1050
Drill Bits
Model# DW2045 G
Drill Bits
Model# 48-20-8852
Drill Bits
Model# DW2162
Drill Bits
Model# 282269
Drill Bits
Model# FB-003
Dolores Conroy (verified owner) –
Carbide tip drill bit that leaves a clean one quarter inch cut. The bit was a little shorter than I expected, measuring only about two and one half inches long. The bit measures one quarter inch wide.In the past, I’ve used cement bits to cut through tile. It was always difficult to break through the surface and then keeping the bit straight. Not so with this bit. I tested it against a tile and it easily broke the surface and left a clean cut.
Hoyt Willms (verified owner) –
We really needed a glass drill bit for several up-and-coming projects on our ranch. Because of the round shank, this one was a bit disappointing. Although the carbide tip would make for very smooth drilling, the round shank causes slip requiring multiple adjustments throughout the drilling process. It does work well when it is working. It does not save time at all because of these adjustment needs.
Lorenza Marquardt (verified owner) –
This 3/16 Carbide Glass and Tile drill bit works. I utilized it to drill a pilot hole in tile to prevent other bits from walking without a drill guide. This is a great economical alternative to diamond bit. I utilized a spray bottle to lubricate the bit to keep the bit from burning it out. It’s a good addition to those that do tile work. I recommend this bit.
Gussie Toy (verified owner) –
The tips broke off easily.. not worth the money I spent on them
Bertha Koepp (verified owner) –
Drill bit was received and used next day, wasn’t quite sure how it would perform. While the shank on the bit is shorter than I prefer it is sufficient for the job intended for most jobs. I was apprehensive that the bit might “slide around” upon first starting however it performed excellently. One point of caution would be that insure that what you are drilling into is securely held down. A uneven base can result in cracking and breaking of the tile or glass being drilled.
Darrin Hudson (verified owner) –
This carbide tip drill bit makes a nice one quarter inch cut. The bit is shorter than one would expected, measuring only two and one half inches long. After inserting in the drill chuck it only make a little over an inch and half deep cut. The hole it cuts is clean and does measure one quarter inch wide. It definitely is sharp and easy to use. I used it to drill wholes in my clay plant pots for drainage. The carbide tip is welded in place and is very sturdy
Tyrell Treutel (verified owner) –
Made a clean hole through the glass.
Ivory Hermiston (verified owner) –
I used this to drill through glass & it worked fine.
Rita Waters (verified owner) –
Goal was to drill holes through tiles to screw few things. I tried brick & masonry bits with no luck, until I found this. Purchased this one & picked it up at a local home depot store. Nice fast shipping. First, I tried it on regular drill mode, it was challenging. Turned it onto hammer mode & with little bit of water presence drill bit started going through like a butter.So, my recommendation is when you use this on tiles just add little bit of water or dip the bit in cold water time to time, it will go through like butter.
Garnet Marvin (verified owner) –
Carbide tip glass and tile drill bit is very unique. Very small to begin with in size and the carbide tip is welded in place. Standard procedure for these delicate bits. When you use it you must be careful with the glass or tile so that you don’t shatter it by drilling. Steady pressure but with a delicate touch. Took a couple tries to learn the proper technique. Very sturdy and sharp bit. Recommend.
Natasha Tillman (verified owner) –
The 1/4 in. Carbide Tipped Glass and Tile Drill Bit is great I used it when I received it. It is sharp and easy to use. I drilled several holes to secure handicapped grab bars in my bath rooms and in one bathroom I used to it to drill holes for parts of my faucet hardware. I also use it to drill wholes in my clay plant pots for drainage. I would recommend this bit to anyone.
Geraldine Breitenberg (verified owner) –
Good Morning: I would just like to write my review on the 3/16 inch carbide tipped glass and tile drill bit. The feature on the bit has a strong point on the end like others we’ve purchased but works differently than the ones we used in the past.. Let me say, I would highly recommend this drill bit for drilling holes into glass tiles. It worked great and exceeded our expectations. My husband is remodeling our bathroom and needed a drill bit that was strong enough to drill through laminate and glass tile. He said the bit drilled through cleanly, without much pressure and didn’t smoke or break like a lot of the others he used. He also appreciated the fact that it did the job quickly and quietly. The quality of this item is strong and durable and worth using for glass tile needs. Thank you so very much for using us to test your product.
Waldo Barrows (verified owner) –
worked great on ceramic tile. just make sure to dip in water after every 2/3 seconds of use.
Lenore Muller (verified owner) –
You ought to test a thing before you review it, but I had no pressing need for a hole anywhere, and the only piece of scrap glass I have is tempered and would shatter if you tried to drill it. So I chucked the bit in the drill press and tried to make a hole in a quartz river stone. I only managed to make a dimple, before the bit dulled aand would go no further.That’s not a fair test – you need a diamond to drill stone. So I resharpened the carbide on a diamond hone, and drilled a series of holes in a coffee cup. You can see the results in the photos. This was fast and did not seem to dull the bit at all, and it still measures about 0.250″. For both tests, I had a squirt bottle of water handy for cooling, lubrication, and dust suppression. As far as testing goes, I think a coffee cup is a lot like a tile.For those of you that are wondering why I would ruin a perfectly good coffee cup, this actually turns it into a nice and interesting planter for the aquarium, and I will probably do several more. Most of the flower pots you can find are either too big or too small. The glazed surface is easy to clean of algae. So this bit is a very useful addition to the toolbox, even if I don’t have a bathroom to remodel.
Keyshawn Nader (verified owner) –
Simple enough design that cut through ceramic floor tile with ease. I experienced zero travel when starting the hole. No vibration while drilling and the residual heat from the bit was minimum when I was done with each hole.Small enough to fit in any tool box.If you are in the trades or a home do it yourselfer, this bit will save you a lot of aggravation.
Chris Volkman (verified owner) –
Had to put shower door on and to do that had to drill though the tile I had installed. This is the first thing I have found that would drill right though tile with no problem. Was able to get door on and looks great. Don’t no how I would have got it on without this Tile drill bit. I had tried several other bits with no luck so I would recommed it highly
Paolo Block (verified owner) –
The 1/4 inch Carbide Tipped Drill Bit for GLASS and TILE applications is a top quality bit. It is sized for use to provide a hole on the surface of glass or a tile surface [or in tile grout]. I use it for adding holes to install plastic anchors for attaching various Bath/Kitchen ‘hardware’ to a Tiled surface or putting a hole through a Glass surface. I have found that using a drilling guide to hold the point steady in the spot you are drilling and using a slow start speed works best . I also will add Tape to the area where the hole will be drilled to help protect from sliding around on the hard slick surface. I would recommend this product for these applications. I also recommend that you have a few PRACTICE pieces of tile or glass to practice on to develop a ‘technique’ before going right into drilling on your actual projects. PapaBear1
Lillian Ferry (verified owner) –
Worked perfectly on ceramic flower pots
Mike Mraz (verified owner) –
I wanted to drill a hole in the bottom of a flower pot. This bit worked perfectly. Drilled a decent hole, without chipping or cracking the pot. I ordered online and picked up a couple of days later in store. THank you! (Isn’t it good when something works the way it should?!)
Mustafa Herman (verified owner) –
Drill bit was received and used next day, wasn’t quite sure how it would perform. While the shank on the bit is shorter than I prefer it is sufficient for the job intended for most jobs. I was apprehensive that the bit might “slide around” upon first starting however it performed excellently. One point of caution would be that insure that what you are drilling into is securely held down. A uneven base can result in cracking and breaking of the tile or glass being drilled.