Drill America 3/4 in. -14 Carbon Steel NPT Pipe Tap

Drill America 3/4 in. -14 Carbon Steel NPT Pipe Tap

Name: Drill America DWTPT34 3/4 in. -14 Carbon Steel NPT Pipe Tap
Brand: Drill America
SKU: HD304632101
Price: 12.76 USD
Availability: InStock
Rating: 4.83 (30 reviews)

Rated 4.83 out of 5 based on 29 customer ratings

$12.76

Clean out deep blind holes and complete your long reach application with ease by choosing this Drill America Steel NPT Pipe Tap.

In stock

SKU: HD304632101 Category: Taps & Dies Brand: Drill America

Description

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound.

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
Appropriate for threading a wide variety of materials both ferrous and non-ferrous
Nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap
Thread tapers 3/4 of an inch per foot
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

Additional information

Weight	1 lbs
Dimensions	2.00 × 5.00 × 2.00 in
Hand Tool Type	Taps
Individual/Set	Individual
Measurement Standard	USS
Model	DWTPT3/4
Number of Pieces	1
Thread spacing	14
Tools Product Type	Hand Tool

Reviews (30)

30 reviews for Drill America 3/4 in. -14 Carbon Steel NPT Pipe Tap

Rated 5 out of 5

Brendon Bauch (verified owner) – September 7, 2022

Worked as expected
Rated 4 out of 5

Caden Hoeger (verified owner) – August 28, 2022

needed this to tap to clean threads in galv to receive a PVC 3/4″ thread. Came promptly to local HD (2days) and worked as expected on galv threads. All’s well that ends well. No water leaks @ connection. I don’t give five stars often.
Rated 5 out of 5

Tiffany Fisher (verified owner) – August 1, 2022

Good quality product
Rated 4 out of 5

Delpha Glover (verified owner) – June 29, 2022

Great tap . cut very well in aluminum
Rated 5 out of 5

Earnestine Cruickshank (verified owner) – June 27, 2022

Did what it was designed to due
Rated 5 out of 5

Kelly Glover (verified owner) – May 29, 2022

Tap used to perfectly clean the threads of our camper water heater drain.Transaction and shipping very smooth. Received when expected!
Rated 5 out of 5

Lindsay Dach (verified owner) – May 20, 2022

Very much needed for my project – glad it was available to order
Rated 5 out of 5

Kailyn Hodkiewicz (verified owner) – May 11, 2022

Glad to know that there is a store from which I can find and purchase a hard to find tool, delivered to my home, at a reasonable price.
Rated 5 out of 5

Fermin Lubowitz (verified owner) – March 16, 2022

The pipe tap did a great job and worked just the way it should. Would purchase again if needed.
Rated 5 out of 5

Ila Fritsch (verified owner) – March 10, 2022

It performed as it should.