Epson Exhibition Fiber Photo Inkjet Paper (24″ x 50′ Roll)
$144.00
In stock
Description
The 24″ x 50′ of Epson Exhibition Fiber Photo Inkjet Paper features a 12 mil thickness and a gloss finish. This fiber-based photo paper is designed for color as well as black and white prints and features an ISO brightness rating of 111%
Additional information
| Weight | 8 lbs |
|---|---|
| Dimensions | 25.25 × 5.5 × 5.5 in |
| Basis Weight | 325 gsm |
| Thickness | 12 mil / 0.3047 mm |
| Brightness | 111% |
| Single/Double-Sided | Single |
| Surface Finish | Glossy |
| Dimensions (W x L) | 24" x 50' / 61 cm x 15.2 m |
Reviews (373)
373 reviews for Epson Exhibition Fiber Photo Inkjet Paper (24″ x 50′ Roll)
Only logged in customers who have purchased this product may leave a review.
Related products
Printer Paper
Printer Paper
$143.99
Printer Paper
Printer Paper
$342.52
Printer Paper
$132.79
Osborne Brekke (verified owner) –
I use it with the Epson 4900, great for B&W, deep black and not too glossy.
Helmer Strosin (verified owner) –
I love the color range I get from this paper, its very rich and pops the image nicely. If you come form the analog world be careful with this paper as it scratches much more so than gel silver, put a little tissue paper in-between the prints if you stack them and you’ll be ok. Not cheep but if you want quality this is a good choice.
Jettie Klocko (verified owner) –
Great weight, great surface, smooth and not glossy, great feel, perfect for color and BW…..a little pricy but with the always ongoing deals its not that bad….
Alanna Schneider (verified owner) –
I purchased this to do prints with an Epson 3800. This is an outstanding paper. The images produced with this paper are truly beautiful.
Alberto Pagac (verified owner) –
My paper of choice for best quality prints.
Maxie Gutmann (verified owner) –
This is my paper of choice when I want some gloss to my photos. Great color rendition, good weight.
Junior Fahey (verified owner) –
excellent dynamic range. Make for rich looking photos
Brady Grant (verified owner) –
Reliable go to paper for our studio.
Andre Gottlieb (verified owner) –
I love this paper! Has just the right quality feel and results. A go-to paper with predictable and excellent results.
Ladarius Feeney (verified owner) –
I use Exhibition Fiber for all of my serious personal work. The surface is like the old F-surface papers (dried glossy side up). The D-max is excellent, and the paper’s thickness says its substantial.
Shayna Kuhlman (verified owner) –
This is a gorgeous paper. I’ve been printing both color and black and white on it. Does anyone have a profile for it for the Epson 3880? Thanks!
Leda Herzog (verified owner) –
Epson Exhibition is a lustrous surface paper with excellent reproduction quality and long lasting keeping properties. My only problem is Epson does not manufacture the paper in 11×17 size. The only solution is to purchase the 17×22 and cut each sheet in half. It is for this reason that I gave it 4 stars.
Floy Hahn (verified owner) –
I got a pack of these and had to return after making two prints. The first paper had scratches on it and the 2nd paper had ink flake off in multiple areas. not acceptable.
Edgardo Kunze (verified owner) –
The classic F surface look and feel of this paper is just what my images need. I recommend that you try it.
Preston Schamberger (verified owner) –
I came out of the era of the darkroom and see the same quality of print I did from the best papers of the past. What else is there to say?
Abbey Walter (verified owner) –
Paper is great, but I found out the usual Epson rebates that B&H sends you after an order are no good. You have to order all 3+ approved papers in the same order. So, rarely would that ever work for this small printer who goes through 220 cartridges every 3-4 months. Shame on Epson and B&H should not send these unless you meet the 3+.
Florence Heathcote (verified owner) –
I’m using my first box of 13×19 Exhibition Fiber, printing with the Epson Stylus Photo 2400. I had difficulty figuring out the proper settings to print through the back feeder of the printer (Manual-Roll is correct) and then I had issues with dust or dirt on the paper. I had previously not had dust problems with Epson Ultra Premium Luster. I’m now examining each sheet before printing and wiping any specs off with a soft brush. Seems to be working well. The paper prints very similarly to Ultra Premium Luster, so I am doing all my testing with that paper, using the same profile, and using the more expensive Exhibition Fiber for final prints for framing. What I love is that, with the Exhibition Fiber’s 13 mil thickness, I finally have an Epson 13×19 paper I can mount and frame by simply using archival corner mounts, leaving the print removable. The paper remains flat in the matted frame. The 10 mil Ultra Premium Luster gets wavy when framed with this method, and the only way I can get an acceptable framed product with that paper is to dry mount the print, a totally non-archival process.
Christ Pouros (verified owner) –
When Epson introduced K3 inks, I started using premium luster paper for black and white on my 4800. The look was great, but the paper was thin up close with window matting. Exhibition Fiber is the answer. Premium Luster look with Ilford Fiber Gloss feel. I still miss the fixer smell on my hands though.
Rudy Waters (verified owner) –
Pretty good paper, still not as beautiful as the old darkroom prints but its must better than the luster.
Hattie Casper (verified owner) –
This is my top choice for a non-matte paper, for both color and B&W. It loves the Epson K3 inks and my 3880. I like the prints I get with this paper much better than with ultra permium luster paper.