No liquid fuels or lubricants are needed for this 12 in. Disc Cutter to saw through brick, stone, pavers, block, ceramics, even concrete with rebar, drywall and other masonry. Cut up to 4 in. deep with the included diamond blade that spins up to 5000 RPM courtesy of a generous 15 Amp high-torque motor. The beauty of this device is its simplicity and ease of use; blade changes are straightforward utilizing a new-age spindle lock mechanism. This is a smart alternative to exhaust-spewing, gas-powered concrete saws.
- Handles soundly positioned to ensure balance, comfort and security
- Cut vertically or horizontally with adjustable safety guard
- Variable blade depth
- Great alternative to gas-powered saws
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Henri Collins (verified owner) –
This is a heavy duty Concrete saw. It cut through concrete bricks like butter. I highly recommend getting a 12 gauge 50 ft extension cord to provide 15 amp 120 volt service for it. service
Imelda Schultz (verified owner) –
Lightweight and easy to operate. Cuts thru concrete as well as bring. Quiter than I expected. Powerful. Adjustsble guard to get the right angle needed. Would recommend.
Earnestine West (verified owner) –
Decent tool,does tend to trip the breaker with prolonged use.but has good power,cut through retaining wall blocks and slabs with ease.only downside was i got a $35 customs charge when i picked it up at UPS.
Faye Terry (verified owner) –
For what it is intended for, the saw does a fairly decent job of cutting up to 4 inch thick concrete. You are not going to zip through it, but with some patience and common sense, it will get there. The machine does heat up so you have to let it rest after about 20 minutes of cutting.For the price, its a good piece of equipment.
Erica Kutch (verified owner) –
Went through block like a knife through butter. Excellent power.
Sarah Cassin (verified owner) –
The biggest limitation was that it couldn’t cut through a full 4 inches of concrete (i.e., the averaged depth of a slab). It also generated a tremendous amount of dust even with a vacuum attached, and using the water on the concrete to minimize the dust resulted in trapped mud with in the blade shield.
Carroll Abbott (verified owner) –
Needed a saw to cut reinforced cement floor. Saw did a good job, cutting four inches deep.Good saw for price. Would be nice to have dust port and /or wet port to help reduce dust. Be sure to wear full face respirator and good ventilation.
Maiya Kulas (verified owner) –
Tool showed up 3 days earlier than their shipping estimate. It works great on the stone I’m using with a stock blade.
Janick Donnelly (verified owner) –
The saw cuts through concrete very easily. I cannot get the vacuum port to control the dust. This makes indoor cutting difficult. Other than that, saw works great.
Lottie Runolfsdottir (verified owner) –
Great saw. Absolutely no reason to buy a gas powered one unless you need water for no dust or need to use away from power. Cuts block and brick like butter.
Austin Senger (verified owner) –
The machine is great for being electric.For the cost it gets the job done. The instructions were a bit vague on how to use the adapters for different size/ types of disc…Over all good…
Kenton Erdman (verified owner) –
1st experience cutting concrete, so can’t compare to gas-powered, but this did the job through a 12″ high x 7.5 ” wide tie beam with rebar in two passes.
Nadia Strosin (verified owner) –
Worked Great for cutting bricks