Freeman Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case
$154.99
Get two tools in one with this Freeman Flooring Air Nailer and Stapler. Features durable die-cast aluminum gun body for dependability.
In stock
Description
The Freeman PFL618BR Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case is perfect for construction contractors and DIYers to install 1/2 in. to 3/4 in. solid tongue and groove hardwood flooring. This air powered tool is compatible with 15.5-Gauge 1/2 in. crown staples, 16-Gauge T-cleats, and 16-Gauge L-cleats from 1-1/2 in. to 2 in. for all 3 types of fasteners. The lightweight body of this combination flooring nailer and stapler is constructed of die cast aluminum, with a hardened steel 1 piece drive blade for durability. 2 interchangeable no mar base plates provide stability for this versatile tool and prevent damage to finished flooring surfaces, ensuring professional results. Recent upgrades have been made to the shape of the foot, along with adding a semi-quick release for easier access to the drive blade in the event of a jammed fastener. Other features include an ergonomically designed handle to reduce fatigue during use, and an air filter/anti-dust cap to protect internal components from debris. The Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer includes a wooden handled flooring mallet with a rubber head, blow molded plastic storage case, safety goggles, air tool oil, and adjustment tools, and is covered by Freeman’s 7-Year Limited Warranty and 90-Day Wearable Parts Warranty.
- Perfect for the installation of 1/2 in. to 3/4 in. solid tongue and groove hardwood flooring
- Compatible with 15.5-Gauge glue collated 1/2 in. crown staples, 16-Gauge glue collated T-cleats, and 16-Gauge glue collated L-cleats from 1-1/2 in. to 2 in. for all 3 types of fasteners
- Constructed of high strength aluminum resulting in a lightweight tool great for extended use
- Anodized aluminum magazine for long lasting durability
- 1-piece drive blade of hardened steel for durability
- No mar base plates prevent damage to finished flooring surfaces
- Recent upgrades to shape of the foot, along with adding semi-quick release for easier access to drive blade in the event of a jammed fastener
- Ergonomically designed handle for ease of operation and reduced fatigue
- Air filter/anti-dust cap protects internal components from debris
- Interchangeable base plates 2 allow you to work on 1/2 in. to 3/4 in. flooring
- Wooden handle flooring mallet with a rubber head, blow molded plastic storage case, safety goggles, air tool oil, and adjustment tools included
- Add the Freeman PFNRB flooring nailer roller base converter when purchasing this tool to increase your productivity even more
- Covered by Freeman’s 7-year limited warranty and 90-day wearable parts warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 25.80 × 23.20 × 5.60 in |
| Air Tool Type | Air Nailer |
| Compressor/Air Tool Features | No Additional Features |
| Condition | New |
| Cordless/ Corded | Corded |
| Included | No additional components or accessories are included |
| Loading type | Strip |
| Maximum Fastener Size | 2 in |
| Minimum Fastener Size | 1-1/2 in |
| Minimum Recommended Air Delivery SCFM @ 90PSI | 2.2 |
| Minimum Recommended Operating Pressure (psi) | 70 |
| Model | PFL618BR |
| Nail Gauge | 16 |
| Nailgun Angle | 0 |
| Power Type | Air |
| Tools Product Type | Air Tool |
Reviews (96)
96 reviews for Freeman Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# FR350B
Nail Guns
Model# PCN65
Nail Guns
Model# BN200C
Nail Guns
Model# HDXBR50
Nail Guns
Model# PFN64
Nail Guns
Model# HDXFN64
Nail Guns
Model# 4G0001N
Nail Guns
Model# 430101N
Teagan Braun (verified owner) –
Works very well with staples not as well with cleats.impressed with quality for price and since i prefer staples anyways I have no issues with the product
Joshua Buckridge (verified owner) –
This was may first experience tackling a nail down flooring project. Like to build my tool collect by buying any specialty tools I my need for a project. I have 5 other nailers by Freeman and all work great and were reasonably priced. This flooring nailer was reasonably priced and I felt I was getting a quality tool.I was pleased with it’s performance, no problems and I set just over a 1,000 nails. Did have to be careful to make sure the catch tabs were flush on the edge of the board, they seemed a bit small, but not sure if that is typical with all flooring nailers.I would recommend based on it’s value, workmanship and performance.
Gene Kilback (verified owner) –
I’m a DIY who started doing framing in the 70’s, then went to college for computer science and have always kept in touch with the construction industry. So when I decided to convert my porch into a sunroom, with a hardwood floor, I chose the Freeman nailer.The device worked great, right out of the box, using 2″ L nails at 95 to 100 PSI and a compressor with a 5 gal. reserve. Because of my experience with framing, I didn’t notice any problem requiring me to swing extra hard to drive the nails into 3/4″ oak on top of 5/8″ subflooring.Just a safety note, use ear protectors, it is loud.
Kaleigh Smith (verified owner) –
I had never installed hardwood flooring until I purchased this nailer. It was easy to use and loading was a snap. I used both staples and flooring nails (in different rooms) and the nailer worked perfectly with both. Finished 4 rooms totally 900 square feet without any problems.
Sophie Prohaska (verified owner) –
I installed 3/4″ hardwood floors on my whole first level. (Around 1200 SF) I was able to purchase this and take my time instead of renting a used tool and having to rush to get it done. This Nailer is very easy to use and did quality work.
Destany Roberts (verified owner) –
The nailer performed flawlessly. Put down one room of 3/4 hardwood without a single misfire/double feed. I highly recommend this for the do-it yourself buyers.
Helga Langworth (verified owner) –
I also was hesitant about buying this tool, the price made it seem like it was to good to be true. But, it is as others say, a great gun out of the box. I did add an inline pressure regulator/gauge on the gun.
Crystal Keeling (verified owner) –
This nailer works fine and I recommend this product. I’m disappointed this nailer is made in China. However, customer service is located in Georgia and the reason I purchased this is the quality of customer service my father received when his Freeman floor nailer experienced a material failure on the air chamber and was leaking.
Gerardo Kiehn (verified owner) –
Used it to install 3/4” oak hardwood floor and did not have a single jammed staple. I applied oil to the gun every 400-500 staples fed and the gun worked perfectly. The mallet has a solid feel to it and it’s well balanced. Happy with my purchase and highly recommend this tool.
Presley Nicolas (verified owner) –
It was great until it seized up.
Oran Fritsch (verified owner) –
I did my entire floor (1220 sqft) and it worked well. Worth it and I saved a ton
Loyal Tillman (verified owner) –
Did a 400 square foot family room (over 2000 nails) and not a glitch whatsoever with this nailer. Price was right and very satisfied with this unit. Give it a drop of oil now and then and that’s it.
Althea Carroll (verified owner) –
This nailer works fine and I recommend this product. I’m disappointed this nailer is made in China. However, customer service is located in Georgia and the reason I purchased this is the quality of customer service my father received when his Freeman floor nailer experienced a material failure on the air chamber and was leaking.
Wyman Bogisich (verified owner) –
Installed approx 400 square feet of oak flooring using 2 inch staples. Nail gun work flawlessly, setting staples at proper depth everytime.
Brendon Bradtke (verified owner) –
I recently remodeled my kitchen and first floor Living Rm, Dining Rm, Foyer. I put 3/4″ hardwood hickory throughout the first floor. I thought about renting a nailer, but after looking at the rental cost and the duration I would need the tool, it was a no brainer to buy a Flooring Nailer. I looked at reviews for several different models and decided on Freeman. I’m so happy with this purchase. It has operated flawlessly and comes with everything you need, including a carrier case. I decided to use cleats, not staples, and it worked great. Seems to be very durable and there were no issues with jams or feeding. I used this with my recently purchased Porter-Cable 6 Gal. 150 PSI Portable Electric Air Compressor, 16-Gauge Nailer, 18-Gauge Nailer and 3/8 in. Stapler Combo Kit (3-Tool). Another great purchase from Home Depot.I’m a DIY junky and very meticulous. I love this purchase and would highly recommend it. You can’t go wrong!!
Cyril Walter (verified owner) –
Purchased this tool to do a 300 square foot room with oak.Worked flawlessly. Did not have any issues at all.