The GE Household Water Pre-Filtration System connects to 3/4 in. plumbing to filter out sand, sediment and rust from all your household water. The pre-filtration system features a 3-position bypass valve to allow you to change the filter without turning off your water supply. This water system helps to provide clean, clear water for showers, dishwashers and laundry.
- Heavy-duty filtration system, clear sump allows for easy viewing of filter
- Install system in basement and/or out of sight
- Filters water at the main supply
- Premium filtration certified to reduce sediment, scale, dirt and rust in your water, appliances and plumbing fixtures
- Easy to install
- Kit includes 3/4 in. plumbing connection, pressure relief valve, bypass option, mounting bracket and remote filter reminder light for simple installation and filter change
- 3-month life, for best filtration results, filter should be replaced every 3-months
- Uses replacement filter FXWTC, FXUSC, FXWPC, or FXWSC
Renee Stokes (verified owner) –
Just started using it. Water tastes cleaner already.
Gaylord Sauer (verified owner) –
Amazing!! You could immediately start to watch it do it job!! Would highly recommend this product and wish I had bought it sooner.
Luisa Wisoky (verified owner) –
Installation went smooth works perfectly no water leaks. Used Oatey fastape for sealing and 3/4 sharbites. Used the tape generously for 3 to 4 rounds and use nail to make the thread groves clear. this will help sharkbite threads to catch with filter threads. Also replaced filter with charcoal filter.The control handle is very tight to twist. I was afraid i am going to break the handle but slowly increased the force on the twist and eventually was able to turn the control handle.I would recommend this product .I tried brita brand water filter before installing this one, which was leaking water from all places after installation i tried replacement filter with more water leaks.
Clark Schmidt (verified owner) –
It works.
Wilhelm Feest (verified owner) –
After reading some of the poor reviews I thought I should add my two cents. The couple one start reviews I read sounded like the owners didn’t know what they were doing and had problems due to there own negligence. I installed my own filter system over 10 years ago and it’s working great. Only tip is that when you change the filter make sure the gasket is installed properly. And after a year or so you’ll have to apply more plumbers grease to the gasket to keep filter changes going smoothly.I am able to use any filter in it that I want, not understanding the problem others have had. Unless they changed something.
Davon Jakubowski (verified owner) –
Very good filter, easy to use.
Devante Barrows (verified owner) –
I don’t have any comments at this moment, this is my first GE product.
Mathew Senger (verified owner) –
This has a filter bypass where you can change the filter without shutting off the water completely. Of course that would allow unfiltered water to flow while you are taking the 5 minutes or so to change the filter. Quick and easy to change the filter. My previous home filter didn’t have the bypass. This also has an indicator on the top to let you know when the filter needs to be replaced. The knob to switch the flow from the filter to bypass or off is a little tight to turn, but you get used to it. I purchased this one to replace the one I had in this house as it would fit in place, without replumbing. I purchased this same model 2 or 3 years ago for my summer house and has never had any issues with it.
Lela Schuppe (verified owner) –
Don’t use the red pressure relief bottom at any time – if you do, it will leak forever.
Janiya Rogahn (verified owner) –
Had it professionally installed. Replaced similar one.
Lessie Champlin (verified owner) –
Easy to install and works as it should!
Zakary Eichmann (verified owner) –
Easy to install & does it’s job.
Darwin Cruickshank (verified owner) –
Easy to install and visible information on a Daily base.
Ismael Hand (verified owner) –
This product works for me , I put two in beside each other as a primary and the other secondary, it’s doing the job, the clear glob you can see the status of the filter without removing the glob because some whole house filter systems have solid no see through glob and you can’t see the status
Jamarcus Wunsch (verified owner) –
Very easy to install.
Selena Stehr (verified owner) –
Easily installed, perfect size
Ignacio Fahey (verified owner) –
The design is very good. Unfortunately the female threads on the housing weren’t cut or more likely, molded very well and it was impossible to get a plastic fitting into it. If you get this, you might want to have a 3/4″ NPT tap handy.
Lawrence Kuhic (verified owner) –
Good filter for the money.
Kristopher Greenfelder (verified owner) –
I am a General Contractor and any home that we install a Tankless HWH I always put this directly in-line prior to any household cold water feeding into the unit. This extends the life of the HWH at least double the life expectancy. Change the filter at least annually and you are good to go!
Krystal Waters (verified owner) –
yes satisfied, did what I needed it to do.