General International 13 in. Drill Press with Variable Speed, Laser System and LED Light
$281.15
Finish your all toughest works easily with the selection of this General International Drill Press with Variable Speed Laser System and LED Light. Forward and reverse switch.
In stock
Description
General International’s 13 in. 16 Speed Drill Press delivers the power you need for even the most demanding workloads. Loaded with features you would expect in a more industrial type drill presses including a bright LED work light. Choose from 16 speeds to match the ideal cutting conditions you need for your material. Featuring our global patented cross-pattern precision laser guide system; this drill press is perfect for the home, garage or worksite. The General DP2003 16 Speed Drill Press, allows you to drill true and exact holes more conveniently than with a handheld drill. This floor-standing, cast iron Drill Press has the power to drill through metal, wood and other materials. The stationary bit with a 5/8 in. chuck capacity, provides accuracy and control. The 13 in. rack and pinion worktable raises and lowers easily and rotates 45° to the right or left, allowing you to drill perfect right angles and consistent repetitive holes. This 16 Speed Drill Press is ideal for use in the home or professional shop on woodworking, metalworking or do-it-yourself projects. The DP2003 Drill Press has belt drive speed adjustment with a minimum speed of 260 RPM and a maximum speed of 4,220 RPM. The worktable can adjust up to 26 in. to accommodate large pieces. The large, front mounted power button is easy to manipulate, even when wearing gloves. For additional safety and stability the drill press can be bolted to the floor. Includes a 2 year limited warranty.
- Global patented cross-pattern precision laser and LED light
- Alignment and centering guide
- Swing: 13 in. drilling/chuck capacity: 5/8 in. taper: MT2, overall height: 64 in. induction motor
- Table tilt 0°-45° scale, spindle travel: 3-1/8 in.
- Unique built-in LED work light illuminates the work table
- Adjustable threaded-rod depth stop with scale
- Heavy cast iron and steel construction
- Solid cast iron mountable base and housing
- CSA certified
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 112 lbs |
|---|---|
| Dimensions | 55.12 × 19.45 × 9.65 in |
| 360- Degree Swivel | No |
| Maximum Speed (rpm) | 4220 |
| Voltage (volts) | 120 |
| Tools Product Type | Power Tool |
| Spindle Travel | 3.13 |
| Portability | Stationary |
| Number of Speeds | 16 |
| Model | DP2003 |
| Minimum speed (rpm) | 260 |
| Magnetic | No |
| Amperage (amps) | 5 |
| Lockout Power Switch | Yes |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Red |
| Chuck Key Storage | No |
| Chuck Capacity | 5/8 In. |
| Built-In Light | Yes |
| Bench & Stationary Tool Type | Drill Press |
| Work Light | Yes |
Reviews (34)
34 reviews for General International 13 in. Drill Press with Variable Speed, Laser System and LED Light
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Model# R24012
Woodworking Tools
Model# 7518
Woodworking Tools
Model# 892
Woodworking Tools
Model# 5615-24
Woodworking Tools
Bosch 5.9 Amp Corded 1-5/16 in. 1 Horse Power Single-Speed Colt Palm Router
Model# PR10E
Woodworking Tools
DEWALT 11 Amp Corded 1-3/4 Horsepower Fixed Base / Plunge Router Combo Kit
Model# DW616PK
Woodworking Tools
Model# 708620B
Woodworking Tools
Bosch 12 Amp 2-1/4 in. Corded Peak Variable Speed Plunge and Fixed Base Router Kit with Hard Case
Model# 1617EVSPK
Cassandra Schuster (verified owner) –
Does everything that add said it would plus very good price on sale and free delivery great would recommend this product
Felipe Gislason (verified owner) –
Build quality seems decent. Haven’t really used it but it appears well built and assembly was straightforward. Good value for the price.
Madison Buckridge (verified owner) –
Drill press works well; but the plastic shield is obtrusive.
Jeffery Blanda (verified owner) –
Worth the price? Absolutely! The chuck had some rough spots in it and needed to be cleaned out from the machining process and 7/64 is about the smallest bit it will hold. I did stop the motor using a 1-1/8 forstner bit drilling through 3/4 oak but it’s handled everything else with no problems. The light could be brighter but overall, I really like the drill press.
Oswald Runolfsson (verified owner) –
Easy to assemble. Very happy with the purchase!
Candace Weber (verified owner) –
Arrived earlier to my home than promised by days and no damage. Easy to assemble. The laser lights are hit and miss to aim. Very little to no run out on the spindle. But the jaws on the chuck won’t close enough for holding bits smaller than 7/64″. No plastic anywhere except for the switch buttons. So far works like a charm. Now I need to find a good drill press vise and make a wood fence.
Missouri Breitenberg (verified owner) –
So far, so good. I have not had this drill press for long, but after constructing it (mostly straight forward, but instructions need more details), it seems sturdy and well built. Very little wobble, smooth feed lever, easy to use table, and laser is accurate. Power seems adequate, but my only issue so far is adjusting the belts. Some configuration for belt tension does not seem possible but I have not had much time to mess with it to know if it is user error or poor product design. Will update my review once I have time to mess with the belt tensions. Overall, I am happy with my purchase.
Clementine Mayert (verified owner) –
Just great!
Bernardo Marquardt (verified owner) –
Picked up drill press at store and carton looked like it had been in a tornado. Was assured if something was wrong they would make it right. It had been re-taped, so loaded up and carried home. Drill press was fine except for the plastic chuck guard, which was cracked in 4 different places and useless, and a dent on the motor starter cover of the motor. I did not contact anyone for replacement of the chuck guard at Home Depot or the drill press manufacturer. Drill press appears to work just fine.
Larissa Veum (verified owner) –
This drill exceeded my expectations smooth handling no vibration, very easy to assemble. Was concerned from other reviews about the box condition but to my surprise when I went to pickup the box at the store it was in perfect condition, definitely will recommend the 13in General International drill press to everyone.
Jerrold Walter (verified owner) –
This is the second tier of general intl made products and it is a great machine so far. We are not using it daily, but very pleased with performance for our needs. Priced great, shipped to home, no problems with delivery. Glad we went with this one.
Margaret Waters (verified owner) –
the unit performs as expected and more, if your trying to save a buck and you don’t need to be super precise in your cuts then this is the machine for you. it works great! my only wish is that the chuck and shaft would spin true so i could get a more precise cut without is oscillating.
Breanna Kassulke (verified owner) –
It works as it should.
Rosie Kohler (verified owner) –
Assembly was pretty easy and I’m happy with the performance!
Ayla Bode (verified owner) –
Works very well, worth the price.
Laney Legros (verified owner) –
Great value for the price. It’s not industrial grade, but perfectly fine for home use.
Nash Leffler (verified owner) –
nice drill press first time owning a general international did not take long to put together either.
Mavis Beahan (verified owner) –
The drill press is very good for me. Assembly is easy. Working is very well. The instructions or specification should show the chuck part number and size.
Sarina Rice (verified owner) –
This is a very well built drill press! It has a nice motor and plenty of power. The problem with this Drill press is the Manuel. You should simply throw it away when you get the box open. The directions to assemble the press are very poor. Once I finally got it assembled it worked nice. But, I would havepurchased a different drill press If I could do it agian. Their are simply too many other Drill presses that have good manuel and are not so hard to assemble.
Claud Sawayn (verified owner) –
I just put this together and tested it and it is very good. For $259, it is an excellent value, especially when compared to others at this or $300 price. This has a laser aim point that is accurate and the led light adds some light to the area. The unit runs smoothly and has a good chuck. This replaced a bench top model that did not have an adequate table and worse, did not easily adjust. This does. You’d have to drop about $500 to get any measuarable improvement so this is an excellent buy.