General Tools EZ Pro Aluminum Dovetail Jig Kit II
$53.32
Ideal for both the beginner and seasoned woodworker, the General Tools EZ Pro Aluminum Dovetail Jig Kit II enables you to make professional dovetail joints without the use of additional tools or equipment. Get an even match of your dovetail ends every time with the self-aligning design of this portable, heavy-duty joining tool. The jig accommodates boards of any width, and it comes with a 1/2 in. dovetail router bit, instructional CD and product manual for easy operation. You can also use this jig kit with all handheld routers and router tables, for added convenience and usability.
In stock
Description
Ideal for both the beginner and seasoned woodworker, the General Tools EZ Pro Aluminum Dovetail Jig Kit II enables you to make professional dovetail joints without the use of additional tools or equipment. Get an even match of your dovetail ends every time with the self-aligning design of this portable, heavy-duty joining tool. The jig accommodates boards of any width, and it comes with a 1/2 in. dovetail router bit, instructional CD and product manual for easy operation. You can also use this jig kit with all handheld routers and router tables, for added convenience and usability.
- Self-aligning design to ensure both ends of the dovetail joint match up evenly every time
- Portable to your work site or home workshop
- Sturdy machined aluminum construction
- Easy adjustments of the dovetail interference to create loose or tight joints
- Doesn’t require bolting the jig to the workbench
- Integrated clamp plates for precise clamping of the jig to the workpiece
- Makes professional furniture joints with ease
- Router control guide knobs
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.66 lbs |
|---|---|
| Dimensions | 3.00 × 3.50 × 14.50 in |
| Individual/Set | Set |
| Jig type | Doweling |
| Material | Aluminum |
| Maximum stock size (in.) | 1 |
| Minimum stock size (in.) | 0.375 |
| Model | 861 |
| Number of Pieces | 3 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 12 |
| Tools Product Type | Hand Tool |
Reviews (55)
55 reviews for General Tools EZ Pro Aluminum Dovetail Jig Kit II
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 20-029L
Cutting Tools
Model# 63324
Cutting Tools
Model# 2100-9
Cutting Tools
Model# 21007
Cutting Tools
Model# 0190MC
Cutting Tools
Model# 2100-5
Cutting Tools
Model# 849
Cutting Tools
Model# 21010-6-SEN
Elisha Williamson (verified owner) –
By far the easiest dovetail jig to use. Works well on a router table or as bench mounted.
Porter Nitzsche (verified owner) –
Even though I have never even attempted to make a dovetail joint or a box joint before, the first time I used this jig it came out perfect! The joint was so tight that it almost did not need any glue. As you will read in other reviews, the jig does flex some as you tighten the clamps on the board, but this does not seem to make any difference to the joint. I have made several drawers using this jig over the last 2 weeks and they have all come out great. I am very pleased with it & would reccomend it without hesitation.
Ivah Nicolas (verified owner) –
The threads on the hold down screws are very loose they were not machined properly I know they will will eventually strip out. The flimsy bars that hold the wood in place are very thin. Save yourself a few bucks and buy the older version there is very little difference between the two. It would be nice if they specified the exact finger details and placed a centering mark on the middle fingers so you could end up with half pins on both ends. You get what you pay for if all you want is to make a few boxes this is OK but it is not a quality jig.
Nelle Bogisich (verified owner) –
Really great product for DIY wood workers. The price, quality, and ease of use out of the box were outstanding.
Issac Stiedemann (verified owner) –
Performs as demenstrated ,just got to fallow the manual.Even tried on some Questionalble material worked fine with a little practice.Not bad for a old timer.
Henderson Larson (verified owner) –
I just recieved this dove tail jig in mail. I bought the dowel maker jig and it worked so good. I had a ——— dove tail jig but it was hard to figure out or I was doing something wrong. Also the EZ Pro will work with a table type router which is just great!!
Providenci Hodkiewicz (verified owner) –
The instructions could be better, but I watched a couple of youtube demonstrations to get the hang of it. The product appears to be well built, and the joint look great. However, my first box came out slightly twisted, so I think it will take some experience before I can get the pieces perfectly aligned.
Walker Goldner (verified owner) –
to be fair this is a well made jig as for craftsmanship, but it is very hard to set up and use. Also, it comes with a dovetail bit but also requires a straight bit that was not included. I am new to using a jig so part of the poor performance is mine but I am trying.
Shawn Nicolas (verified owner) –
It was a gift for my son, but he just told me yesterday how much he liked it and how easy it was to use.
Electa Block (verified owner) –
I’ve been a carpenter my whole life. I have never needed a dovetail jig. I bought this knowing it was an entry level jig. I’ve used it to make box joints for bee hives. It works fine for that. I surely wouldn’t use it to make fine furniture or cabinets though.
Isabella Macejkovic (verified owner) –
Great tool, just getting into woodworking and used it to build some custom drawers. Easy to use and made very short work of the project once I got the hang of it.
Claudine Batz (verified owner) –
There were five videos for this tool. Two had no sound and were useless. Please fix these videos!
Quincy Nienow (verified owner) –
I did eight drawers so far with this jig. I would give it five stars if it was made out of cast-iron instead of aluminum. The reason is that when you’re clamping down making the tails the jig actually Flexes, So that your cut across is not square and it throws the dovetail off. I used some clamps to keep it square and it worked just fine but if the jig was stiffer such as made out of cast-iron it would be perfect.
Ralph Terry (verified owner) –
HARD TO LINE UP BOTH BOARDS. THE END TAIL BREAKS OUT EVEN WITH BACK BOARD.
Kailyn Kohler (verified owner) –
Works as advertised, Easy learning curve. Needs extra bit for full box joints. Comes with bit for half blind joints. Customer of HD for many years. Good products and prices.
Elnora Rosenbaum (verified owner) –
The product has not been used as now – many projects are waiting to start
Meagan Lueilwitz (verified owner) –
I was trying to figure out how to do dovetails, then I got this jig and it is a snap. Once I get it set up for the wood I’m using, I can crank out dovetails.
Mona Bruen (verified owner) –
Bit height is very important when using this jig. It works well.
Camille Hodkiewicz (verified owner) –
This is a great little jig for small projects. Not for heavy use. Excellent value. Easy to use. Although it is capable of doing wide boards, seems to work best with narrow stock. I’m very satisfied.
Isai Fadel (verified owner) –
quick and easy dovetails