HDX Pneumatic 18-Gauge 2 in. Brad Nailer
$29.79
The HDXBR50 Pneumatic 18-Gauge 2 in. Brad Nailer accepts brad nails from 3/8 in. to 2 in., and is a great for applications such as trim, finish, cabinetry, along with hobbies and crafts. A die cast aluminum housing and quality internal components make it durable and also lightweight. A convenient reload indicator allows you to see when fasteners are running low to avoid unnecessary delays. The Pneumatic 18-Gauge 2 in. Brad Nailer will increase the productivity of DIYers at home as well as professional construction contractors at the job site, and is covered by HDX’s 1-Year Limited Warranty.
In stock
Description
The HDXBR50 Pneumatic 18-Gauge 2 in. Brad Nailer accepts brad nails from 3/8 in. to 2 in., and is a great for applications such as trim, finish, cabinetry, along with hobbies and crafts. A die cast aluminum housing and quality internal components make it durable and also lightweight. A convenient reload indicator allows you to see when fasteners are running low to avoid unnecessary delays. The Pneumatic 18-Gauge 2 in. Brad Nailer will increase the productivity of DIYers at home as well as professional construction contractors at the job site, and is covered by HDX’s 1-Year Limited Warranty.
- Reload indicator allows quick magazine replacement
- Dual-spring pusher for a consistent feed
- Dust cap for clean internal operation
- Drives 3/8 in. to 2 in. brad nails
- 360° adjustable exhaust
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 2.50 × 9.50 × 10.40 in |
| Air Tool Type | Air Nailer |
| Compressor/Air Tool Features | No Additional Features |
| Condition | New |
| Cordless/ Corded | Corded |
| Included | No additional components or accessories are included |
| Loading type | Strip |
| Maximum Fastener Size | 2 in |
| Minimum Fastener Size | 5/8 in |
| Minimum Recommended Air Delivery SCFM @ 90PSI | 1.3 |
| Minimum Recommended Operating Pressure (psi) | 60 |
| Model | HDXBR50 |
| Nail Gauge | 18 |
| Nailgun Angle | 0 |
| Power Type | Air |
| Reconditioned | No |
| Tools Product Type | Air Tool |
Reviews (83)
83 reviews for HDX Pneumatic 18-Gauge 2 in. Brad Nailer
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# HDPMPN
Nail Guns
Model# 430101N
Nail Guns
Model# PP123
Nail Guns
Model# FR350B
Nail Guns
Model# 4G0001N
Nail Guns
Model# FN250C
Nail Guns
Model# DPBR50
Nail Guns
Model# 540104N
Delbert Lakin (verified owner) –
This was easy to use and not to heavy love it
Dorian Mante (verified owner) –
I got this to put up trim that I took down to insulate gaps and it worked extremely well. There is no power adjustment on the gun itself so you have to adjust your compressor between 60psi and 150psi. I used 100psi to do my trim and it worked fantastic. Never jammed on me.
Kennedy Klocko (verified owner) –
Stable gun work ok so far. Well see how it does long term
Malvina Rosenbaum (verified owner) –
This tool is very light and easy to use. The ability to move the exhaust ports away from you is great when you have to use the gun in different angles or upside down. I have used the 1″ nails as well as the 2″ nails and both are nailed in perfectly. Great addition to my pneumatic tools.
Cheyanne Hand (verified owner) –
Only drove a couple dozen nails. Worked fine. I don’t need this often so I was happy to find an inexpensive one. My only disappointment is that you have to adjust the force (pressure) at the compressor. I was nailing cedar shingles on a bird feeder and had trouble with them driving clear through. Had to adjust the pressure just barely high enough to make the gun work and then still drove them a bit too deep. But I’m happy with it. Now, just hope that it doesn’t wear out or break too quickly.
Dahlia Parker (verified owner) –
This nailer does a great job,sinks the heads well with minimal marring.The weight is balanced and it is easy loading. Unfortunately it does not have a tool -less clear out otherwise it would be 5 stars.
Angelina Wilkinson (verified owner) –
Well built, light weight. Perfect for do it yourselfer like me!
Cathryn Muller (verified owner) –
I was reluctant in purchasing this inexpensive gun nailer, but I am very satisfied after using it. In the directions, it does not tell you how and where to put drops of their that came with the gun. I put 3 drops of oil in the gun’s air fitting before connecting to my compressor. No problem at all.
Charlotte Rodriguez (verified owner) –
Worked very well out of the box. No issues. Love it.
Bernadette Shields (verified owner) –
this gun is great for use around the house and for my woodworking projects…great for birdhouses. picture frames. small shadow boxes and numerous other projects…
Mariela Ruecker (verified owner) –
I was about to spend significantly more on a brad nailer until I stumbled upon this one. It has been a little work horse doing the trim on a 1000 sq ft apartment plus a few side projects. It has only jammed once, and I removed the bent brad with needle nose pliers. Overall very pleased. Great product.
Aurelia Hackett (verified owner) –
Purchased the gun and it misfired like crazy, it would only put nails in the trim 3 out of 10 shots. Thats horrible! Was tested at different air pressures as well…same result. Went back to the store and exchanged it for a different one. This new gun works every time. I have put about 70 nails into trim thus far and not one single misfire. Quality control seems to be an issue…guess i just got unlucky with my first gun.
Alvena Ferry (verified owner) –
I am putting up tongue and grove works great for the job
Germaine Spencer (verified owner) –
Love it. Works great. Won’t break the bank
Jalyn Hermiston (verified owner) –
Great little tool for a great price. Metal construction feels great.
Matilda Rau (verified owner) –
I used this to install MDF baseboards throughout a 1400 Sq Ft home.It worked flawlessly, not a single jamb or misfire
Carolina Emard (verified owner) –
This has been great, I’ve used it a large number of times. I was worried based on the price but I’ve had zero issues. I’ve shot at least 2500 brads through it and have all worked great
Broderick Moore (verified owner) –
performed and looked as noted in description. Recommended for price.
Lydia Green (verified owner) –
I used it for trimming out the bedroom worked great worth the money for home use in small projects. The firing pen got stuck at first took it a part added a little oil works like a champ.
Malinda Zieme (verified owner) –
Pneumatic 2in. x 18-gauge Brad NailerLove this product. I re-did the moldings in my house and this product is a must. I’ve used finish screws before as well as finished nails and both suck compared to using a brad nailer. The brads hold so much better. Also, this brad nailer is lightweight and easy to use on ceiling crown molding. It doesn’t wear out your arms. I was also happy with the depth it drove the brads. It didn’t overshoot. I’ve included some pictures. The nailer comes with lubrication, however, the manual says the nailer is designed to be low maintenance. So far I see that as true. If you are doing moldings then this is a product you need.