Husky Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler
$144.53
Keep surfaces clean by choosing this Husky Pneumatic Gauge Mini Flooring Nailer. Anodized aluminum is lightweight and durable.
In stock
Description
The Husky DPFBC940 Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler combines a flooring nailer and stapler with a brad nailer and narrow crown stapler. This exceptionally versatile air powered combo tool is designed to install 3/8 in. to 5/8 in. engineered or solid hardwood flooring with the pre-assembled 45-Degree flooring attachment. Switch out the nose piece fast and easy, and convert this multi-purpose tool into a brad nailer and stapler, allowing you to lay your flooring in hard to reach areas against a wall or in tight corners. You can also then put in base boards, crown moulding, chair rails and other decorative trim. This 4-in-1 nail gun and stapler is compatible with 18 gauge brad nails from 5/8 in. to 1-5/8 in., and 18 gauge 1/4 in. narrow crown staples from 1/2 in. to 1-5/8 in. A one piece drive blade of hardened steel combined with an anodized aluminum cylinder and magazine result in a durable and lightweight tool. The ergonomically engineered body and comfort grip handle make this tool easy to use for long shifts. Featuring a quick jam release, tool-free depth adjust, reload indicator, and an easily adjustable flooring foot plate, this combo tool will increase productivity and reduce unnecessary downtime at the home or job site. The Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler will save DIYers and construction contractors time and money, and is covered by Husky’s 2 Year Limited Warranty.
- Designed for the installation of 3/8 in. to 5/8 in. solid or engineered flooring with the 45° flooring base attachment, or trim and finish work with the regular nose cover
- Compatible with 18-Gauge glue collated brad nails from 5/8 in. to 1-5/8 in., and 18-Gauge glue collated 1/4 in. narrow crown staples from 1/2 in. to 1-5/8 in.
- Anodized aluminum cylinder and magazine extends the life of the tool
- 1-piece drive blade of hardened steel for durability
- Quick jam release for easy access clearing in the event of a jammed fastener
- Tool-free depth adjust for various applications
- Reload indicator so you can see when fasteners run low
- Ergonomically engineered body results in a rugged, comfortable, and lightweight tool great for extended use
- Comfort grip handle reduces fatigue and increases control
- 360° adjustable exhaust allows user to direct air away from face and work surface
- Call 1-888-HD-HUSKY for customer service and support.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 3.54 lbs |
|---|---|
| Dimensions | 10.63 × 3.30 × 12.00 in |
| Air Tool Type | Air Nailer |
| Battery Amp Hours | No Battery |
| Battery/Charger | Tool Only |
| Charger Included | Charger Not Included |
| Condition | New |
| Cordless/ Corded | Cordless |
| Included | Oil |
| Maximum Fastener Size | 1-5/8 in |
| Minimum Fastener Size | 5/8 in |
| Model | DPFBC940 |
| Nail Gauge | 18 |
| Nailgun Angle | 45 |
| Number of Total Batteries Included | 0 |
| Power Type | Air |
| Tools Product Type | Air Tool |
Reviews (46)
46 reviews for Husky Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# FR350B
Nail Guns
Model# 2458-21
Nail Guns
Model# DPBR50
Nail Guns
Porter-Cable 3-1/2 in. 30 Degree to 34 Degree Clipped-Head Framing Nailer
Model# FC350B
Nail Guns
Model# 430101N
Nail Guns
Model# 540104N
Nail Guns
Model# 4G0001N
Nail Guns
Freeman Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case
Model# PFL618BR
Raphaelle Cruickshank (verified owner) –
Works well once you get used to the position when nailing down it make quick work for the install.
Eula Towne (verified owner) –
Great purchase! Wasn’t sure if it would be worth it when I got it, but it was worth every penny. Having one tool to use for both flooring and trim is also a huge bonus.
Afton Powlowski (verified owner) –
The nailer worked great. The only flaw that I can find is the safety mechanism. Most of the time you have to look at the little bar to make sure it goes into the groove of the hardwood correctly. Unlike other nailers you can just slide the gun onto the wood and pull the trigger. Besides that no problem at all. I have only used it on two jobs so far. I am very satisfied with the tool.
Caesar Casper (verified owner) –
Smooth operation
Whitney Friesen (verified owner) –
easy to use right out of the box, simple adjustments and easy to read and follow instructions
Brendan Marvin (verified owner) –
ProSmall, lightweight and versatile; it is well worth every Penney of the sub $100 price. I recommend it for smaller DIY jobs.Con.Switching the mini between the angled flooring attachment and the straight finish nail attachment isn’t very intuitive, and can be difficult at first, once you change it several times it gets easier; although the 4 in 1 option is handy, I elected to use it in conjunction with my Dewalt straight finish gun.
Jordan Robel (verified owner) –
laid 2200 sq ft of engineered hardwood and didn’t have any problems
Judy Conn (verified owner) –
Yea the staple gun worked great much better than I could have hoped for The job I had to do turned out to be better than my expectations. And I’m a professional flooring installer
Maurine Homenick (verified owner) –
I purchased this nailer to install hardwood flooring it worked very well would recamemd it highly
Reilly Tremblay (verified owner) –
Stapler was a bit difficult to set up at first. The trigger gets stuck on the safety tab. The safety tab is finicky itself, it doesn’t always want to line up in the right location of the tongue during actual use if the gun. But overall its not a bad tool. Had one bad jam during 2000sqft of flooring installation.
Mercedes Stroman (verified owner) –
Not as heavy duty as I hoped for.
Cortez Gislason (verified owner) –
I ordered the wrong size nailer originally then saw this little guy and thought, this is going to be a long project. This nailer was awesome! It didn’t jam up once during the entire project which was approximately 600 square feet. I like that it can be used for various functions too. Good product.
Dorothy Steuber (verified owner) –
I’m glad I got this nailer vs. getting a standard floor nailer that only does flooring. It is very easy to switch from floor nailer to brade nailer. It worked great. I only had a couple of staples not go in correctly. (This was my first time using a pneumatic nailer). I completed 600 sq. ft. of 1/2″ inch engineered flooring without major issues. Still need to do one more room but expect it to go smoothly. I’m also going to use this nailer to put back up the trim.
Asia Spinka (verified owner) –
Many times it would fire two staples at once and I would have to dig one out without messing up the floor. Other then this issue it preformed very well.
Melvina Russel (verified owner) –
I have installed over 900 sqft of 1/2 engineered flooring so far. After some adjustments on depth and air pressure the gun worked flawlessly. I can’t comment on the brad nailer operation.
Kaycee Muller (verified owner) –
Very good gun
Aubrey Rippin (verified owner) –
Excellent tool!!!
Penelope Lubowitz (verified owner) –
Found that nailer does not function correctly on 3/4” oak flooring. Unable to get staples to seat properly even when increasing air pressure to 110#’s
Tyrique Kris (verified owner) –
The Husky Pneumatic 18-gauge 4-in-1 mini flooring nailer is impressive! It comes with the floor nose installed, but it also comes with a regular nose to use as a standard nailer. I needed to renail some siding and it was very easy to change out the heads. It drives the nails in so good and does not leave heads sticking out like my previous nailer. It has an easy exhaust adjustment so you can direct the discharge air away from you. The fasteners load very easily and the trigger is smooth and east to operate. It will handle 18 gauge brad nails form 5/8″ to 1-5/8″ and staples from 1/2″ to 1-5/8″. I’d definitely recommend it for the professional or do it yourselfer.
Anabelle Olson (verified owner) –
Excellent tool. Worked perfectly on engineered bamboo floor we installed.