Husky Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler
$144.53
Keep surfaces clean by choosing this Husky Pneumatic Gauge Mini Flooring Nailer. Anodized aluminum is lightweight and durable.
In stock
Description
The Husky DPFBC940 Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler combines a flooring nailer and stapler with a brad nailer and narrow crown stapler. This exceptionally versatile air powered combo tool is designed to install 3/8 in. to 5/8 in. engineered or solid hardwood flooring with the pre-assembled 45-Degree flooring attachment. Switch out the nose piece fast and easy, and convert this multi-purpose tool into a brad nailer and stapler, allowing you to lay your flooring in hard to reach areas against a wall or in tight corners. You can also then put in base boards, crown moulding, chair rails and other decorative trim. This 4-in-1 nail gun and stapler is compatible with 18 gauge brad nails from 5/8 in. to 1-5/8 in., and 18 gauge 1/4 in. narrow crown staples from 1/2 in. to 1-5/8 in. A one piece drive blade of hardened steel combined with an anodized aluminum cylinder and magazine result in a durable and lightweight tool. The ergonomically engineered body and comfort grip handle make this tool easy to use for long shifts. Featuring a quick jam release, tool-free depth adjust, reload indicator, and an easily adjustable flooring foot plate, this combo tool will increase productivity and reduce unnecessary downtime at the home or job site. The Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler will save DIYers and construction contractors time and money, and is covered by Husky’s 2 Year Limited Warranty.
- Designed for the installation of 3/8 in. to 5/8 in. solid or engineered flooring with the 45° flooring base attachment, or trim and finish work with the regular nose cover
- Compatible with 18-Gauge glue collated brad nails from 5/8 in. to 1-5/8 in., and 18-Gauge glue collated 1/4 in. narrow crown staples from 1/2 in. to 1-5/8 in.
- Anodized aluminum cylinder and magazine extends the life of the tool
- 1-piece drive blade of hardened steel for durability
- Quick jam release for easy access clearing in the event of a jammed fastener
- Tool-free depth adjust for various applications
- Reload indicator so you can see when fasteners run low
- Ergonomically engineered body results in a rugged, comfortable, and lightweight tool great for extended use
- Comfort grip handle reduces fatigue and increases control
- 360° adjustable exhaust allows user to direct air away from face and work surface
- Call 1-888-HD-HUSKY for customer service and support.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 3.54 lbs |
|---|---|
| Dimensions | 10.63 × 3.30 × 12.00 in |
| Air Tool Type | Air Nailer |
| Battery Amp Hours | No Battery |
| Battery/Charger | Tool Only |
| Charger Included | Charger Not Included |
| Condition | New |
| Cordless/ Corded | Cordless |
| Included | Oil |
| Maximum Fastener Size | 1-5/8 in |
| Minimum Fastener Size | 5/8 in |
| Model | DPFBC940 |
| Nail Gauge | 18 |
| Nailgun Angle | 45 |
| Number of Total Batteries Included | 0 |
| Power Type | Air |
| Tools Product Type | Air Tool |
Reviews (46)
46 reviews for Husky Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Freeman Pneumatic 4-in-1 18-Gauge 1-5/8 in. Mini Flooring Nailer and Stapler
Model# PFBC940
Nail Guns
Model# 540104N
Nail Guns
Model# DPFN64
Nail Guns
Model# HDX123
Nail Guns
Model# 430101N
Nail Guns
Model# 4G0001N
Nail Guns
Model# HDXFN64
Nail Guns
Model# BN200C
Birdie Konopelski (verified owner) –
Bought this unit to install a wooden floor and is very easy to use ,works great and doesn’t jam.Very versatile also great for trim work.
Dayton Skiles (verified owner) –
I’ve done a whole house without issues so far and doing the trim as well.
Delaney Toy (verified owner) –
Put ownInstalled 1500 sq.ft. 3/8 ” engineered hardwood. No problems. Worked great. Very nice tool.
Berneice Veum (verified owner) –
It works good most of the time…but has a tendency to fire two at once and makes the first only go half way in and the second one jams the gun . Pain when it happens because you have to pull the half driven staple out of floor board with pliers
Albert Armstrong (verified owner) –
Very good
Hadley Stracke (verified owner) –
Worked wonderful
Finn Huel (verified owner) –
My 1st attempt was a 3 hour endeavor. Item was used and did not work. Exchanged it for another one but that was used as well, luckily I checked it before I left. Finally got one that worked and its performing well. My advice to anyone buying tools, open the box and make sure it hasn’t been returned
Miller Larkin (verified owner) –
This product is good for what I need for
Colin Miller (verified owner) –
Good tool
Madeline Mayert (verified owner) –
Yea the staple gun worked great much better than I could have hoped for The job I had to do turned out to be better than my expectations. And I’m a professional flooring installer
Alan Dibbert (verified owner) –
It worked perfect for 650 sqft project. No damage to the material. Only negative would be not easy to see when your low or out of staples
Filomena Nikolaus (verified owner) –
Worked great. Not one jam or misfire during 1200 square feet of install.
Amya Bauch (verified owner) –
Worked great right out of the box. Installed 200 square feet of 1/2×5″ engineered Acacia flooring with a glitch.
Holden Murray (verified owner) –
Great staple gun that can shoot brads. I would buy it again if I had to.
Harmony Bednar (verified owner) –
It was great , no complaints
Vilma Kilback (verified owner) –
Easy to use, was cheaper than renting one as I decided to refloor our entire house.
Katheryn Cassin (verified owner) –
Good value for the money, but I do have a problem with misfires. That might be because I’m installing bamboo flooring and it is very desnse.
Gladys McKenzie (verified owner) –
Laid 3/8″ engineered hardwood in our kitchen without any problems using this guy. Easy swap out from staples to brads.Just know that this is designed for light duty.
Vidal Kiehn (verified owner) –
I couldn’t have written it better so Taken right from their description “The Husky 4-in-1 Flooring Nailer and Stapler combines a flooring nailer, flooring stapler, brad nailer and narrow crown stapler into one ultimate flooring tool. It comes with the 45 degrees flooring attachment pre-assembled, so you can get right to work laying your 3/8 in. – 5/8 in. engineered or solid hardwood flooring. Switch out the nose piece to convert the tool into an 18-Gauge brad nailer/stapler and easily lay your flooring in hard-to-reach areas against the wall or in tight corners. “This is a multipurpose nailer that works well in any of the configurations you choose to use it for. Came in very handy for crown, flooring and also great for building furniture, trim and 1000 other things It comes with the half inch swivel air fitting included and is ready to use right out of the box. Conversions from staples to nails are a simple snap off and snap on,,,18-Gauge brad nails 5/8 in. to 1 5/8 in. in length or 18-Gauge narrow crown staples 1/2 in. to 1 5.8 in. in lengthRecommended to install 3/8 in. to 5/8 in. engineered or solid hardwood flooringComes with oil and will use standard 18 ga. staples or nails…. And in my opinion the price is great considering the amount of usage you’ll get out of it…..
Kellie Gottlieb (verified owner) –
Knocked out a 350 sq ft project with ease. Not a single jam up! Used this tool for 3/8″ engineered flooring, 5″ wide plants. The beauty was being able to use the tool starting on row TWO because of its smaller size. Also able to use on the 2nd to last row. I have another 550 sq ft project planned where this tool will be extremely impactful.