Husky Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer
$76.69
The Husky DPFN64 Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer is ideal for applications such as base moulding, crown moulding, chair rails, door and window casing, cabinetry, and furniture construction. This air powered nail gun is compatible with 16-Gauge straight finish nails from 1 in. to 2-1/2 in., and features a quick jam release for easy access clearing in the event of a jammed fastener. The ergonomically engineered die cast aluminum body and comfort grip handle work together to create a durable, balanced, and lightweight tool perfect to use for long shifts. A dual mode trigger allows to quickly toggle between bump firing for speed or sequential firing when the focus is on accuracy, and the driving depth of the nails is easily adjustable by simply turning a wheel near the trigger. A no mar safety tip eliminates damage to working surfaces, ensuring professional results for DIYers at home as well as construction contractors at the job site. The 360° adjustable exhaust allows you to direct air away from your face, and the air filter/anti-dust cap extends the life of the tool by keeping the internal components free from debris. The Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer will increase your productivity and reduce downtime, and is covered by Husky’s 2-Year Limited Warranty.
In stock
Description
The Husky DPFN64 Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer is ideal for applications such as base moulding, crown moulding, chair rails, door and window casing, cabinetry, and furniture construction. This air powered nail gun is compatible with 16-Gauge straight finish nails from 1 in. to 2-1/2 in., and features a quick jam release for easy access clearing in the event of a jammed fastener. The ergonomically engineered die cast aluminum body and comfort grip handle work together to create a durable, balanced, and lightweight tool perfect to use for long shifts. A dual mode trigger allows to quickly toggle between bump firing for speed or sequential firing when the focus is on accuracy, and the driving depth of the nails is easily adjustable by simply turning a wheel near the trigger. A no mar safety tip eliminates damage to working surfaces, ensuring professional results for DIYers at home as well as construction contractors at the job site. The 360° adjustable exhaust allows you to direct air away from your face, and the air filter/anti-dust cap extends the life of the tool by keeping the internal components free from debris. The Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer will increase your productivity and reduce downtime, and is covered by Husky’s 2-Year Limited Warranty.
- Ideal for base moulding, crown moulding, chair rails, door and window casing, cabinetry, and furniture construction
- Compatible with 16-Gauge glue collated straight finish nails from 1 in. to 2-1/2 in.
- Quick jam release for easy access clearing in the event of a jammed fastener
- Ergonomically engineered body results in a rugged, comfortable, and lightweight tool great for extended use
- Comfort grip handle reduces fatigue and increases control
- Dual mode trigger for switching easily between bump and sequential firing
- Tool-free depth adjust for various applications
- No mar safety tip prevents damage to your working surface
- 360° adjustable exhaust allows user to direct air away from face
- Air filter/anti-dust cap protects internal components from debris
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 4 lbs |
|---|---|
| Dimensions | 2.95 × 12.13 × 11.02 in |
| Air Tool Type | Air Nailer |
| Compressor/Air Tool Features | Adjustable Exhaust Port, Fastener Depth Control |
| Condition | New |
| Cordless/ Corded | Corded |
| Included | No additional components or accessories are included |
| Loading type | Strip |
| Maximum Fastener Size | 3/4 in |
| Minimum Fastener Size | 2-1/2 in |
| Minimum Recommended Air Delivery SCFM @ 90PSI | 2.0 |
| Minimum Recommended Operating Pressure (psi) | 70 |
| Model | DPFN64 |
| Nail Gauge | 16 |
| Nailgun Angle | 0 |
| Power Type | Air |
| Reconditioned | No |
| Tools Product Type | Air Tool |
Reviews (33)
33 reviews for Husky Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# 6E0001N
Nail Guns
Model# DPBR50
Nail Guns
Model# PCN65
Nail Guns
Model# HDPMPN
Nail Guns
Model# FN250C
Nail Guns
Model# 430101N
Nail Guns
Model# D51257K
Nail Guns
Model# PFN64
Gideon Stokes (verified owner) –
Have not used it a ton, but it works well for what I have done. Seems to be well made, of sturdy construction, not cheap or plastic. Have driven both 1 1/4″ & 2 1/2″ nails in softer wood and it worked well Have not had an opportunity to test it on any hardwood yet. Pretty easy to set up loads easily
Leif Cruickshank (verified owner) –
Up until I got this nailer, I’d always used an 18-ga brad nailer for trim, and I figured I’d try this 16-ga nailer for installing window jamb extensions and door jambs. One of the nicest features about this nailer is the pad and shape of the nose. The nailer didn’t leave a single mark on my jambs, and the curve of the nose made it easy to slightly adjust the angle of the nail. Another great feature is the way the nose flips out of the way to easily clear jams; however, I’ve used the gun for about a dozen window jambs and haven’t had a single jam yet (I did oil it before first use). Adding/removing nails is easy but you do have to actually grab the nails – they don’t slide easily in the magazine – so if you need to remove them (which I do, just for safety) it’s hard to grab them if you only have a few left in the magazine. On my nailer, the depth adjuster was really locked in place out of the box, so I had to work really hard with a plier to get the depth adjuster to move. Once I did, adjustment was easy. I used the nailer on the deepest possible setting, and I still sometimes had to use a nailset to “hide” the top of the fasteners. The nailer does ok in corners; I found that turning it upside down made it more effective at reaching into corners (so the nose rests on the curved part). I thought I would find this nailer too heavy compared to my 18-ga, but it wasn’t.
Clay Veum (verified owner) –
Good solid nailer & good value for the money! No jams so far, but the mechanism to clear a jam is pretty straightforward. Loading finish nail strips is fairly easy after getting used to it. The spring-loaded nail feed needs to be held back strongly to get it out of the way when inserting the strip. Nail depth control is a little tricky – very much trial and error. I was using 2″ nails through skirting board, drywall & into studs. It took over 100psi and the max setting on the depth control to get them to be slightly below the surface. And even then an occasional nail would protrude a little further – probably due to wall variations.
Dino Cartwright (verified owner) –
It didn’t shoot through 3/4 hardwood floor Brazilian cherry . Only use it for molding.
Leanna Howe (verified owner) –
Exceeded my expectation. I put down hardwood flooring and needed to face-nail down a few rows. It was very good using DeWalt 16 GA finishing nails with occasional premature shots (sensitivity of trigger: mistake on my part). After getting used, it performed very well. The price was cheaper than other brands, too. I recommend it.
Larry Muller (verified owner) –
Was remodeling our house and bought this nail gun to install baseboards and cabinetry moldings. Worked great. Have used both 2 inch and 1 inch finishing nails and the nail gun has operated flawlessly with both. Super easy to load and use. Nailed a box and a half of nails so far and no jams or problems.
Alvina McKenzie (verified owner) –
Was upset that I could not ((and still can’t) find my Porter Cable 16 gauge pneumatic nailer but after ordering, receiving and using this one I don’t really care anymore! When I first took it out of the box it seemed heavy compared to the PC 16 ga. but after actually using it I see that is not the case. Well balanced and solidly built and the “free to move with me” male hose adaptor on the gun is a great feature.My PC pneumatic nailers have been good to me but I will say I would have to agree with the reviews that say the 16 ga. jams too often. This one seems like the mechanism is very smooth. Just started using it so we’ll see how it goes but I’d be surprised if any problems developed.
Pascale Pagac (verified owner) –
easy to use
Tyree Carroll (verified owner) –
I purchased this nailer for a hardwood floor installation, and I have to say it’s proven to be a very capable tool. No problems whatsoever.
Derek Schultz (verified owner) –
I had never used a nail gun before. Easy to use, excellent saftey controls for idiots and I could have never rebuilt my fence without it. With hte right air pressure it sets the nails perfectly.
Mabelle Rowe (verified owner) –
This gun has worked with me for several days in a row and has not jammed once!
Richmond Kilback (verified owner) –
This Finish nailer makes quick work of tasks without a lot of effort. The nailer will save you a lot of time and energy. Very little trace evidence is left behind as well. None of the hammer indents if you miss or drive the nail in too deep.The nailer is very light weight and easy to use.
Walker Bergstrom (verified owner) –
Fhis gun was way better than I ever expected,I use it every day.
Dakota Hettinger (verified owner) –
Great tool for your DIY
Reginald Bogisich (verified owner) –
Fun met my needs. Lightweight and easy to use.
Maryse Hayes (verified owner) –
The directions were easy to understand tool was easy to use did a great job
Deondre Dickens (verified owner) –
excellent tool,good price
Price Dickens (verified owner) –
I bought this gun on sale about a year ago as a back-up for my bostitch 16 gauge. I was very surprised when i used this gun trim a house. It never jammed one time with any nail size i tried even a bunch of senco 1″ finish nails. It fires quietly compared to bostitch and it had power in reserve even when nailing Brazilian walnut with 2 1/2 ” nails which it recessed all nails just below the surface perfectly to be filled. The only feature on this gun that I am a little disappointed with is the depth adjustment, its a little difficult to turn but other than that I am very happy.I use mainly hitachi finish guns and man it is just as smooth but at a much lower cost. Dont be afraid you will be happy as I am and use it just about everyday……
Hattie Ferry (verified owner) –
Just unconventional nails and a fraction of the time. Used the finish nailer to trim out our basement renovation and it was great! Much cleaner than conventional nails and I was done in half the time!
Ryan Gleason (verified owner) –
I Have put door up casing and set my hardwood floor. worked great