Jet 3/4 HP 2 in. x 42 in. Benchtop Belt and 8 in. Disc Sander, 115-Volt J-41002
$463.07
JET Bench Belt and Disc Sander is ideal for grinding, sanding, finishing, polishing, deburring and contouring all types of material.
In stock
Description
The JET Bench Belt and Disc Sander gives you two professional-grade machines wrapped into one. Heavy-duty steel construction with a precision-ground, cast iron tilting table and motor with plenty of power means no compromise in engineering quality. The unique design of this machine allows for sanding and grinding as well as delivering a premium finish. Plus you can easily handle outside curves or odd-shaped pieces on the 2 in. belt.
- 3/4 HP, 3450 RPM disc speed and 3100 SFPM belt speed
- Deluxe miter gauge turns and locks for common angles, 45° both left and right
- Abrasive belt unit does the work of a jig saw, coping saw or hand file while removing material and finishing at the same time
- Removable platen lets you to get into small openings and handle odd shapes and angles
- Mount an optional flex shaft for carving, drum sanding, deburring and more
- Includes deluxe miter gauge
- Hinged idler wheel cover
- Adjustable dust deflector and dust chute
- JET Red Assurance 2-year warranty
- JET offers full tech support in order to assist with any warranty issues; please call 1800-274-6846 for assistance
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 60 lbs |
|---|---|
| Dimensions | 20.50 × 22.75 × 20.00 in |
| Amperage (amps) | 6.2 |
| Maximum belt sanding speed (ft./min.) | 3100 |
| Variable Speed | No |
| Tools Product Type | Power Tool |
| Reconditioned | No |
| Power Tool Features | No Additional Features |
| Portability | Stationary |
| Model | 577004 |
| Minimum belt sanding speed (ft./min.) | 3100 |
| Maximum Speed (rpm) | 3450 |
| Belt length (in.) | 42 |
| Dust collection type | Port |
| Disc table width (in.) | 7.5 |
| Disc table length (in.) | 10.75 |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | Gray |
| Bench & Stationary Tool Type | Sander |
| Belt width (in.) | 2 |
| Voltage (volts) | 115 |
Reviews (8)
8 reviews for Jet 3/4 HP 2 in. x 42 in. Benchtop Belt and 8 in. Disc Sander, 115-Volt J-41002
Only logged in customers who have purchased this product may leave a review.
Related products
Sanders
Model# 9924DB
Sanders
Model# 9031
Sanders
Model# BO4900V
Sanders
Model# R25011
Sanders
Model# 6101-6
Charlene Mante (verified owner) –
Very nice piece. Heavy duty and something I will keep for years and years.
Javier Hackett (verified owner) –
A solid high quality machine with good customer support. We purchased one 15 years ago for our full time metal shop, it’s still running strong. This new one will help us keep up with increased demand.
Germaine Baumbach (verified owner) –
For the cost of the maching I would have expected more from Jet tools. Both the belt sander and disc sander needed some adjustments to make square. The belt sander table needed to be adjusted to fit properly and the bracket which holds the table in place needed to be tweeked to make the table square and level. The disk sander table was also not square and needed to be adjusting inorder for miter guage to be square to disc face. The disk sander table does not adjusted easily for angles but with time and practice can be overlooked. Big down side to the belt sander portion is that In order to change the sanding belt it is necessary to remove the belt sanding table completly every time in order to have enough clearance room to remove the old belt and install a new belts. Once you have it adjusted and squared it is a decent machine. Was just disappointed that I had to tweek parts that should have been square from the factory not having to make adjustments myself. Overall give a B- just because of the tweeking required right out of the box and that you need to remove the belt sanding table to change belts.
Chasity Bednar (verified owner) –
Online order, item arrived promptly, was well packaged and damage free. Easy setup with simple easy to understand instructions included. Recommendations from the manufacturer for setting up the product correctly to enure efficient operation made sense. Instructions facilitated getting the belt running true on the system in just a couple of minutes. Unit has plenty of power for belt or disk sanding for most applications, 2″ belt makes access into tighter sanding jobs much easier than larger belt sanders. Good solid product.
Cole Rau (verified owner) –
Excellent equipment virtually faultless.
Kimberly Kunde (verified owner) –
The industrial quality belt sander has a Cast iron frame with good metal Ball bearing wheels and a decent 3/4 HP motor. The angle adjust on the cast iron belt table is rather poor making precise angle setting difficult but it works. The 8″ disc is Aluminum and so thin it does not belong even on a consumer grade product. The disc guard / frame appears to be cast aluminum and is OK but it is also the mounting point for the cast iron disc table creating a weak link for vibration damping to the base. The thin aluminum disc is very disappointing. I expected more from an industrial rated machine. The steel base is fine. Buy for the Belt sander and forget the disc. Buy a separate Disc sander with a cast iron disc plate and better table mounting.
Jacinto Prosacco (verified owner) –
Great quality. Does what it says it will do. Highly recommend. Would buy again.
Justus Willms (verified owner) –
works well