Jet 550/702/1044 CFM Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, 115-Volt, AFS-1000B
$399.99
Ensure better and cleaner air quality in your workstation with this Jet Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, AFS-1000B.
In stock
Description
The JET 115-Volt 1000 CFM Air Filtration System is ideal for smaller home shops. It’s also easy to install on your ceiling out of your way. Its 2-filter system with air diffuser disperses outgoing air into a broader pattern. It features a fully enclosed ball bearing motor with overload protection for long, dependable service. A remote control and timer facilitate added convenience with its use.
- 2-filter system with air diffuser disperses outgoing air into a broader pattern
- Disposable electrostatic outer filter attracts more dust particles
- Inner pocket filter is removable for easy cleaning
- Easy grip handles allow easy portability of unit
- Four eye bolts let you hang the unit from your ceiling
- Remote control has built-in timer with 2-, 4- and 8-hour settings
- Fully enclosed ball bearing motor with overload protection gives you long, dependable service
- Rubber feet prevent marring of the surface when placed on your workbench
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 61 lbs |
|---|---|
| Dimensions | 32.50 × 26.20 × 15.00 in |
| Bag Capacity/Dry Volume (cu. ft.) | 0 |
| Color Family | White |
| Dust Collection Product Type | Air Filtration System |
| Interior Hose Diameter (In.) | 0 |
| Model | 708620B |
| Tools Product Type | Power Tool |
Reviews (53)
53 reviews for Jet 550/702/1044 CFM Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, 115-Volt, AFS-1000B
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Model# DW680K
Woodworking Tools
Bosch 15 Amp Corded Variable Speed Combination Plunge & Fixed-Base Router Kit with Hard Case
Model# MRC23EVSK
Woodworking Tools
DEWALT 11 Amp Corded 1-3/4 Horsepower Fixed Base / Plunge Router Combo Kit
Model# DW616PK
Woodworking Tools
Model# 3365
Woodworking Tools
Model# R4331
Woodworking Tools
Milwaukee 2-1/4 Max-Horsepower EVS Multi-Base Router Kit with Plunge Base and BodyGrip Fixed Base
Model# 5616-24
Woodworking Tools
Model# R24012
Woodworking Tools
Bosch 12 Amp 2-1/4 in. Corded Peak Variable Speed Plunge and Fixed Base Router Kit with Hard Case
Model# 1617EVSPK
Ludwig Rempel (verified owner) –
No problem setting up right out of the box. Works great, in a 480 sqft. shop. Keeps dust down very well.
Sydney Auer (verified owner) –
My shop was in the basement and my wife was mad for all the dust in the house. Since I got this unite we don’t have that problem as much.
Gaylord Casper (verified owner) –
We haven’t had this very long but it seems to do the job that I wanted and that is clean the air quality from the dust my husband makes every day from sanding his projects. I love that there is a timer and we can leave it on after he is done for the day and it shuts off after the 2 or 4 hours we leave it on. The next day the shop is much cleaner, the only draw back is the cost of the air filters!
Rossie Nitzsche (verified owner) –
Exactly as advertised, arrived within a few days. Simple and easy to install. Great air circulation, very quiet in low mode. Would reccomend to others.
Joel Schumm (verified owner) –
Filter works like a charm but wish remote was not line of sight only. Also if placing up high can’t tell what auto time is set (can’t see lights which are on back opposite of filter).
Brody Rath (verified owner) –
Installed vertically on the wall in my workshop. I have many woodworking tools which produce a lot of dust in the air, and so far this has performed extremely well. Installation was very easy, and filter removal is also easy. So far, I have not needed to use a face mask anymore while this is running(for dust particles).
Allie Johnston (verified owner) –
The Jet Filtration system has changed the way we breathe. We do a fair amount of woodworking and did not realize how much dust we were actually creating. We installed the system and turned it on and in 15 minutes had to change the filter. I will never do woodworking again without running my filtration system.
Ottilie Erdman (verified owner) –
Easy to install and works well. Only negative is it is a little louder operating than expected.
Reilly Runolfsson (verified owner) –
Worked right out of the box. Cleans my shop very well.
Sheridan Boehm (verified owner) –
Does a nice job. High speed move a lot of air !!!!
Genoveva Gaylord (verified owner) –
The air filtration unit works well. It cleans the air in my 23×23 shop in just under an hour on low. Ceiling mounted 2 feet from wall. Low setting is quite. Medium setting is louder and use it when sanding. Squirrel cage fan was well balanced and unit is vibration free. Remote is a plus. Very happy.
Kenna Stamm (verified owner) –
easy to use. does what it says. great addition to the shop!
Kallie Ferry (verified owner) –
Does what it was expected to do.
Wallace Lebsack (verified owner) –
The unit is on the heavy side at 61 lbs. But it’s well made. Assembly not required and the remote for it works great. Bought the unit for our cabin that is under construction. We needed a way to remove the additional air particulate to keep it out of the geothermal system. Additonal air filtering works great. And the ttimer system allows us to set it and forget it when we leave. This unit will be moved into my future work shop when the cabin is complete. I would also recomend this for those serious about their air quality in the home. If you have hobbies or home business that requires a clean environment I would recommend this. It does produce some noise, but you can find ways to dampen that.
Janet Dietrich (verified owner) –
Great product. HD only sells the unit not the replacement air filters.
Hector Skiles (verified owner) –
Works Great.
Jalen Beer (verified owner) –
Simple and easy to use. Clears a 1200 sq ft metal fab shop nicely. Pretty quiet given amount of air running through.
Lew Shields (verified owner) –
Shipping was on schedule and the driver left it by my garage instead of front door which is great.
Ericka Berge (verified owner) –
So far so good. I’m very happy with how quiet it is on the Low setting.
Jordane Kautzer (verified owner) –
Great filter. 500 sq ft area with 10’ ceilings. Takes the fine sawdust out quickly. The remote is the key part. The noise is not bad at all. Expected it to be louder, so bonus.