Jet 550/702/1044 CFM Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, 115-Volt, AFS-1000B
$399.99
Ensure better and cleaner air quality in your workstation with this Jet Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, AFS-1000B.
In stock
Description
The JET 115-Volt 1000 CFM Air Filtration System is ideal for smaller home shops. It’s also easy to install on your ceiling out of your way. Its 2-filter system with air diffuser disperses outgoing air into a broader pattern. It features a fully enclosed ball bearing motor with overload protection for long, dependable service. A remote control and timer facilitate added convenience with its use.
- 2-filter system with air diffuser disperses outgoing air into a broader pattern
- Disposable electrostatic outer filter attracts more dust particles
- Inner pocket filter is removable for easy cleaning
- Easy grip handles allow easy portability of unit
- Four eye bolts let you hang the unit from your ceiling
- Remote control has built-in timer with 2-, 4- and 8-hour settings
- Fully enclosed ball bearing motor with overload protection gives you long, dependable service
- Rubber feet prevent marring of the surface when placed on your workbench
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 61 lbs |
|---|---|
| Dimensions | 32.50 × 26.20 × 15.00 in |
| Bag Capacity/Dry Volume (cu. ft.) | 0 |
| Color Family | White |
| Dust Collection Product Type | Air Filtration System |
| Interior Hose Diameter (In.) | 0 |
| Model | 708620B |
| Tools Product Type | Power Tool |
Reviews (53)
53 reviews for Jet 550/702/1044 CFM Air Filtration System with Remote and Electrostatic Pre-Filter, 3-Speed, 115-Volt, AFS-1000B
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Porter-Cable 11 Amp Corded 1-3/4 Horsepower Fixed Base Router Kit
Model# 9690LR
Woodworking Tools
Model# 557
Woodworking Tools
Model# DW680K
Woodworking Tools
Model# DW682K
Woodworking Tools
Model# 3365
Woodworking Tools
Model# JP0610
Woodworking Tools
Model# 7518
Woodworking Tools
Model# DW616
Jarrell Flatley (verified owner) –
Works great. The air in my shop is so much cleaner.
Myrl Marvin (verified owner) –
This filtration system is a must have. I had been running my Jet vac to clean the air but the filtration system turns over the air so many times faster and uses much less power. I should have purchased one of these years ago.
Audrey Brekke (verified owner) –
Works like a charm. It takes two people to hang it from the ceiling because the unit it quite heavy. My shop air has never been cleaner.
Abigayle Barrows (verified owner) –
The unit works well and is reasonably quiet. My workshop is in a basement; the ceilings are not high enough to hang the unit, so it is sitting on a bench, and I do not use the remote. This is a hobby shop, so not a tremendous amount of dust, but the air is much clearer, especially when sanding.
Ewald Zieme (verified owner) –
Powerful. Simple. Perfect for any size shop. You will not be disappointed. Hang and forget about it until needed. Tinker Woodshop exclusively uses only Jet.
Wilber Balistreri (verified owner) –
Works great and runs fairly quiet even on highest setting. Cleaned the air quickly in the shop, my sinuses feel much better.
Zella Crooks (verified owner) –
Excellent at cleaning small wood dust particles from the air.
Magnus Boyer (verified owner) –
I didn’t realize how much “stuff” was in the air in my shop. After running this tool for a couple of hours, the filter was a dramatically different color. It became the color of the Masonite I was cutting. That meant that I wasn’t sucking the dust into my lungs, and it wasn’t coating everything in the house. I whole-heartedly recommend the Jet air purifier. Two of my friends already have their’s installed too, and love them.
Virgie Goyette (verified owner) –
BEFORE YOU TURN IT ON: remove the filters and examine the cap screws that hold the blower to its mount. One of mine was not threaded in at all and two were loose. The fourth one is probably loose, but it can’t be reached without drilling a hole in the top of the case or removing the other end from the case. That would require drilling out the pop rivets that hold it in place. To tighten the cap screws requires an Allen wrench of the right size that has an unusually-short leg, because there is little clearance above the cap screws. Fortunately, I had one. Drilling access holes in the top is probably the best thing to do, in case the screws work loose. There have been many reviews complaining that the fan was loose and made grinding noises, but JET seems uninterested in improving their quality control. I haven’t has a chance to try the machine out otherwise, because I broke my arm before mounting it. The one I bought ten years ago or so worked great, although the remote control died after a few months. It is reasonably quiet, especially on the lower settings.
Verona Zboncak (verified owner) –
Great air cleaner. I bought a Dylos air monitor to make sure my dust collection/air cleaning system in my 24×24 garage was working. This thing keeps the air in the shop way below OSHA clean air standards. On high, it will clean the air back to safe levels in about 5 minutes! I usually keep it on low or medium, depending on what I’m working on, and it keeps the air clean. I would definitely recommend this for a wood workshop.
Beryl Jaskolski (verified owner) –
I like that it has three speeds. I can feel the air circulating around the shop when it’s running. The air is noticeably cleaner, much better for our lungs, and keeping the upstairs house cleaner also .
Jeromy Schinner (verified owner) –
excellent
Kendrick Heller (verified owner) –
easy to install, easy to change filters, not too loud on lowest setting.
Morris Johnson (verified owner) –
I had researched air filtration units and read consumers comments. The unit was just as I expected. It is a good high quality product and works very well. I am pleased with it.
Dewitt Rice (verified owner) –
Great filter for my woodshop.
Kenna Robel (verified owner) –
This machine moves air around at a great pace. Mounting is a bit tricky as it needs to be mounted on overhead beams. A real bargain for the robust features it touts.
Adriana Corwin (verified owner) –
Remote works well. Unit cycles and cleans air as advertised. Good unit
Ceasar Treutel (verified owner) –
Works extremely well! Clears my 20’x20’ shop in minutes.
Devyn Runolfsson (verified owner) –
An excellent shop filter for this price range and performance. The ability to turn it on for a set period of time is great – I can run it for several hours after I leave my shop knowing the air will be clean the next day. At the low speed fan setting it’s very quiet.
Abe Heller (verified owner) –
Good quality components, seems well-made for the most part. Only had mine for a month, took some doing for me to hang it from my shop ceiling; had to upgrade the threaded ‘pop-rivet’ fasteners to threaded eye bolts w/ fender washers when the rivet things began to turn. Had it running a few hours, not too noisy.