Klein Tools 1-1/8 in. Carbide Hole Cutter
$52.87
The 1-1/8 in. Carbide Hole Cutter is ideal for cutting 3/4 in. conduit and pipe. It features a split-point pilot drill bit to reduce walking. An integrated flange helps prevent drilling beyond the sheet metal.
In stock
Description
The 1-1/8 in. Carbide Hole Cutter is ideal for cutting 3/4 in. conduit and pipe. It features a split-point pilot drill bit to reduce walking. An integrated flange helps prevent drilling beyond the sheet metal.
- Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet
- Smooth start pilot drill bit for greater control
- Ejection spring for easy slug removal
- Replacement hole cutter pilot bit available (Cat. No. 31874)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.36 lbs |
|---|---|
| Dimensions | 5.75 × 3.88 × 1.25 in |
| Arbor Size | 3/8 |
| Material Cut | Multi-Purpose |
| Teeth Per Inch | N/A |
| Shank Style | Hex |
| Shank Diameter | 3/8 in |
| Pilot Bit Included | Yes |
| Model | 31876 |
| Min Chuck Size Required | 3/8 In. |
| Individual/Set | Individual |
| Arbor included | Yes |
| Hole Saw Diameter (in) | 1-1/8" |
| Drilling Depth (in) | 0.63 |
| Drill Bit Type(s) Included | Hole Saw |
| Drill Bit Type | Hole Saw |
| Bit Material | Carbide |
| Bit Length (in.) | 4.3 |
| Bit Diameter | 1-1/8 in |
| Tools Product Type | Power Tool |
Reviews (27)
27 reviews for Klein Tools 1-1/8 in. Carbide Hole Cutter
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-20-8856
Drill Bits
Model# FB-003
Drill Bits
Bosch Carbide-Tipped Rotary SDS-Plus Hammer Bit Set (7-Piece)
Model# HCK001
Drill Bits
Model# DW2535
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# DW2043 Z
Drill Bits
Model# FB-015
Drill Bits
Model# DW2046 G
Vivianne Olson (verified owner) –
Very goof
Demarcus Flatley (verified owner) –
This bit is a life saver. I had to cut 50 conduit holes in a wiring trough and burned up 2 standard carbide hole bits on the first 4 holes. I bought this and it not only finished the job, it is still as sharp as when i took it out of the package. It is more expensive, about the price of 3 regular hole cutters, but you get what you pay for. Anyone that does electrical work needs this cutter.
Ben Huels (verified owner) –
I burned up a few step drills and a couple hours running conduit through my metal building, but this cutter made short work of it. The ejector spring is a nice addition so I don’t have to spend time levering the cut disc out of it.
Jamel Johnson (verified owner) –
Had to make a hole cut through fairly thick metal no problem with this bit made my job easier,cleaner that how its done
Enos Rath (verified owner) –
Fast, clean, cut. Like how spring throws out the cut center.
Natalie Boyer (verified owner) –
I needed to drill a 1 1/8″ hole in a 3 hole stainless steel sink to create a 4 hole setup. The drill preformed prefect. It went through the stainless steel with ease. Drill did not grab or chatter and created a perfect hole with almost no burr on the bottom side.
Adelbert Purdy (verified owner) –
Doe’s a good job cutting holes.