Klein Tools 1-1/16 in. Broad-Head Bull Pin with Tether Hole
$29.02
Klein Tools Broad-Head Bull Pin with Tether Hole is ideal for aligning bolt holes when working with steel construction. Black finish for rust resistance.
In stock
Description
Klein Tools Broad-Head Bull Pins are machined from quality alloy steel to resist corrosion and mushrooming. Their angled head and smooth blending of radii increase strength and reduce the danger of chipping. The tether hole allows you to fasten to tether for safety when working at height.
- Forged, heat-treated bull pin increases efficiency by providing a larger striking surface
- Tether hole allows you to tether tool while working at height
- Head design also reduces chance of pin slipping from the hand when aligning holes
- Squared-off shoulders, below the head, have been forged to provide a surface for applying wrench to loosen wedged bull pins
- Long, even taper reduces binding and hang-up
- Heat-treated for strength and black finish for rust resistance
- Tether not included
- Made in USA
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.48 lbs |
|---|---|
| Dimensions | 1.50 × 1.50 × 10.50 in |
| Assembled Depth (in.) | 1.063 in |
| Assembled Height (in.) | 10 in |
| Assembled Width (in.) | 1.063 in |
| Hand Tool Type | Bull Pin |
| Material | Steel |
| Model | 3256TT |
| Pin length (in.) | 10 |
| Resists mushrooming | Yes |
| Tip size (in.) | .25 |
| Tools Product Type | Hand Tool |
Reviews (12)
12 reviews for Klein Tools 1-1/16 in. Broad-Head Bull Pin with Tether Hole
Only logged in customers who have purchased this product may leave a review.
Related products
Specialty Hand Tools
Model# 700
Specialty Hand Tools
Model# 86571
Specialty Hand Tools
URREA 1/8 in. to 3/4 in. Pouch Set of Spiral Bolt Extractors Screws 5 Piece
Model# 9500B
Specialty Hand Tools
Model# 70220
Specialty Hand Tools
Model# #16-16
Specialty Hand Tools
Model# 709383
Specialty Hand Tools
Southwire 3K Cable Puller (No Motor) Includes Adaptors and PC100
Model# 57143101
Specialty Hand Tools
Model# 3261
Elisabeth Schultz (verified owner) –
The Klein Tools 1-1/16 in. Broad-Head Bull Pin with Tether Hole is better than my old bull pin or drift pin. This new one, has a bigger head than my old one, which means less chance of hitting my hand. The other thing that this new one has, it has a hole up near the head so I can run a lanyard through it. That way, when we are doing aerial work, there is no chance of me dropping it by accident, which has happened in the past.
Harry Ziemann (verified owner) –
1-1/16 in. Broad-Head Bull Pin with Tether Hole works great on most applications it is very versatile and can handle heavy loads and will stay put.I would recommend product if your work is overhead and you want your tool to stay put it goes in easy and pulls out ok but if it gets caught you can always use a wrench to pry it out.Very handy tool for a contractor.
Casimer Hahn (verified owner) –
I have only used this once since I got it. The bull pin is all it is advertised. I used it as wedge to move a portion of a wall over. I was only using a two pound hammer to hit it without so much as a mushroom forming on the end. I would not hesitate to use a large maul to hit it as is a very solid piece of steel. This is a Klein tool so I know it will last a long time.
Monty Reynolds (verified owner) –
This Bill pin is top quality.
Kaleb Lynch (verified owner) –
I used this pin in addition to the wrench – These worked well supporting me in the install of roof framing and adding wood to the frame. I didn’t expect the pin to be so useful until we were having issues lining up the wood due to slight warping. Putting the pin in holes and then using the wrench and pin to align further and then aligning the next bolt making installation so much easier. I have used eagle claws in the past and worked on pressing the wood to line up. Using these pins and wrench made life a lot easier.
Cyril Grady (verified owner) –
The 1 and 1/16 inch Broad – Head Bull Pin with tether hole is perfect for using to line up bolt holes in steel eye beams. It has a very nice large head making it easier to hit with a hammer. The tether hole is perfect for putting a leather strap thru it so that you can keep it on your tool pouch , or your tool belt. This is a great pin to have in your toolbox.
Aliyah Ratke (verified owner) –
Another quality Klein tools product. I’m a plumber by trade and use this tool quite a bit on flanges and meter settings. It’s a good quality tool and has a nice balanced weight to it. Perfect for lining up holes in all types and sizes of flanges. The broad head is great for beating on with a heavy hammer for the stubborn tasks at hand. It a great tool to keep on the truck and doesn’t take up much space
Pamela Waelchi (verified owner) –
The 1-1/16 in. broad-head bull pin with tether hole is a very good product. It helps you line up what you are working with. I really like it, it meets my expectations. i really do appreciate you letting me try this, I thank you so much. I have gotten so many useful products from the Seeds program and I am so grateful. Any one who gets this product will be very grateful also.
Orlo Hauck (verified owner) –
I have had my Klein Tools 1-1/16 in. Broad-Head Bull Pin with Tether Hole for about 1 1/2 months and have found that its better than the old bull pin or drift pin. This new one, has a bigger head than the old one, which means less chance of hitting my hand. The other thing that this new one has, it has a hole up near the head so I can run a tether through it. That way, when I am doing aerial work, there is no chance of me dropping it by accident, which has happened in the past.
Misty Luettgen (verified owner) –
What Can You Say, It’s a Klein Tool! Got this to help on some construction that I have around the property. Has come in handy & is a good value for this is one sturdy tool! Having the tether hole to attach to my Klein Bolt Bag was a plus. The new wider head provides a better striking surface with less chance to hit ones hand. Helped align beam & drill holes quickly & efficiently. A good tool to have.
Robin Fadel (verified owner) –
1-1/16 in. Broad-Head Bull Pin with Tether Hole works great on most applications it is very versatile and can handle heavy loads and will stay put.I would recommend product if your work is overhead and you want your tool to stay put it goes in easy and pulls out ok but if it gets caught you can always use a wrench to pry it out.Very handy tool for a contractor.
Marshall Douglas (verified owner) –
This Klein Bull pin is a steel tapered rod used as an alignment tool to position parts or components prior to assembly. Its main use is to align metal parts with drilled holes so that the two components can be assembled with bolts or rivets. Contractors use these in steel frame construction and scaffolding. As a mechanic this tool has been invaluable assembling automotive control arms, sway bar links, frame mountings and snow plow bracketry. It has a large striking head to use a hammer if needed, it also has two flats where an 1-1/16” open end wrench can be used to twist and remove it from stuck situations. The long taper accommodates small to large holes. This tool also comes with a drilled hole in the head to attach a lanyard or tether if working overhead.