Klein Tools 6-in-1 Multi-Nut Driver
$27.84
In stock
Description
This multi-nut driver featuring multiple sizes in one tool will reduce the number of individual nut drivers in your belt. The sizes are interchangeable ensuring you have the size you need when you need it. Color coded shaft ends make it easy to identify the size. Increase your productivity and lighten your load with this multi-nut driver.
- This Klein Screwdriver / Nut Driver includes 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 9/16-Inch six-point hex nut drivers
- Solid build quality with nut drivers that exceed the standard torque performance
- Hollow shafts accommodate long bolts
- Color-coded bands for easy identification
- Wrench-assist to help remove stubborn fasteners
- Rare earth magnets hold nuts and bolts
- Multiple sizes in one convenient tool
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 11.00 × 1.90 × 4.75 in |
| Assembled Depth (in.) | 1 in |
| Assembled Height (in.) | 9.5 in |
| Assembled Width (in.) | 1 in |
| Color Family | Assorted Colors |
| Drive Size | 1/4 in |
| Drive Type | Hex |
| Electrical Tools Features | No Additional Features |
| Hand Tool Type | Individual Nut Driver |
| Handle Length (in.) | 5.5 |
| Handle Material | Comfort Grip |
| Individual/Set | Individual |
| Model | 32800 |
| Number of Pieces | 4 |
| Shaft Length (in.) | 4 |
| Tools Product Type | Hand Tool |
Reviews (41)
41 reviews for Klein Tools 6-in-1 Multi-Nut Driver
Only logged in customers who have purchased this product may leave a review.
Related products
Screwdrivers & Nut Drivers
Klein Tools 9-Piece Insulated Nut Driver Set with Case- Cushion Grip Handles
Model# 33524
Screwdrivers & Nut Drivers
Klein Tools #1 Phillips Head Screwdriver with 3 in. Round Shank- Cushion Grip handle
Model# 603-3
Screwdrivers & Nut Drivers
Klein Tools Hollow Shaft Nut Driver Set with Cushion Grip Handles (7-Piece)
Model# 647
Screwdrivers & Nut Drivers
Model# 32460
Screwdrivers & Nut Drivers
Model# 68-010
Screwdrivers & Nut Drivers
Klein Tools 5-in-1 Screwdriver/Nut Driver- Cushion Grip Handle
Model# 32476
Screwdrivers & Nut Drivers
Klein Tools #2 Square- Recess Tip Screwdriver with 4 in. Round Shank- Cushion Grip Handle
Model# 662
Screwdrivers & Nut Drivers
Klein Tools #1 Phillips – 3/16 Inch Slotted Replacement Bits
Model# 32482
Raphael Lebsack (verified owner) –
Very handy tool ordered 2 for my use. Co-workers liked it had to order 8 more.
Rocky Gerlach (verified owner) –
Great tool and well made
Jessyca Towne (verified owner) –
Definitely not just another gimmicky all-in-one tool, this multi-size nut driver is heavy duty and should handle rough applications. The handle is big, with a comfortable rubbery grip; the drivers are heavy walled, accurately made and nicely finished. In exchange for a bit of fiddling each time you need a different size, you get an orderly and compact way to carry a whole set with you, and a much bigger and better handle than the typical individual driver would have. Great quality and a tool for the long haul.
Kiel Leffler (verified owner) –
What I expextes
Brendan Kshlerin (verified owner) –
Handy, saves space in tool pouch for other tools.
Viva Luettgen (verified owner) –
very handy and great for saving space
Mavis Ebert (verified owner) –
Very convenient having all sizes in one driver.
Rozella Little (verified owner) –
Missing 1/2″. Nice having most drivers in one. But i will still have carry two.
Shirley Will (verified owner) –
This one tool replaces 6 in my bag.
Vincenza Zieme (verified owner) –
A well made (in Taiwan), if somewhat large and heavy, multiple sized nut driver tool (with a comfortable rubber grip on the handle), including 3/16”, ¼”, 5/16”, 7/16”, 3/8” and 9/16” sizes. The size of each driver is clearly marked, in addition to having color-coded bands at each tip. Each of the mating parts is provided with spring loaded ball-detents to prevent inadvertent separation when being used, a little stiff initially, but will probably loosen up in time. This is a large tool, approximately 9 ½ inches long, weighing approximately one pound. The balance of the tool is biased opposite the handle end which may cause fatigue if used for long periods of time. The size of the grip and the heft of the tool could lead to over-torquing the smaller sized fasteners (especially the 3/16 inch), calling for a degree of finesse on the part of the user. A hex section is provided on the mid-section of the “main” driver to permit use of a wrench to provide additional torque. Unless you have a 25/32” or 21 mm wrench handy, an adjustable wrench will probably be the tool of choice for this “assist”. Again, the same cautions on possible over-torquing will apply, as above. This tool will be most useful when you anticipate encountering at least 3 or 4 of the provided fastener sizes on an occasional basis, saving the need to carry multiple individual tools. If you have need to secure only one or two of those size fasteners on a frequent basis, the heft and size of the tool may be a negative. I will be using this tool in my “Travel” tool bag, in which I try to keep tools needed to address whatever I may come up against on short notice. To that end, it will serve its purpose well.
Zella Nader (verified owner) –
This nut driver it’s an excellent tool thanks
Teagan Lowe (verified owner) –
As always, Klein tools are the best. Saves six separate nut drivers in my tool bag….
Denis Ortiz (verified owner) –
When doing electrical work you often come across nuts or bolts you need to loosen. Rather than taking up space in your tool pouch for all the different combinations of sizes this driver covers pretty much everything you’ll encounter. The driver itself is a little clunkier and thicker than I expected but I believe it’s a reasonable tradeoff to get everything packed into one tool.There are two things that hold me back from giving five stars. The first is the heavy weight and thick shaft. That’s enough to mean that if I had a dedicated size nut driver around I’d reach for that first. The second is that for some of the sizes you have to pull out one of the inner shafts. There is nowhere to put that while you’re working with the tool so I worry there’s a good chance it’ll get lost over time. A better design would have figured out how to store that piece in the handle when not in use.
Sunny Zieme (verified owner) –
On the large side. Would be much better if they would add a 1/2 inch nut size to this.
Marcelina Feest (verified owner) –
Product worked perfect!! Better than expected, searched for this specific combination for a while, found bet price at HD..
Rusty Kunde (verified owner) –
Very handy to have aroundHaving all the driver sizes in one place is great for me. I no longer seem to be able to judge a nut or bolt head’s size by sight. With this tool, I can switch sizes in just a few seconds without making multiple trips outside to the toolbox. The drivers fit in the handle very snugly, no wobbling around or slipping out of place. The heads also fit the nut/bolt heads very nicely. Snug, not too tight and no excessive slop in the fit. Slide right on.I also haven’t encountered any issues with screw shafts that protrude past the nut when everything is tightened up.Very nice.
Dangelo Sporer (verified owner) –
Very well made and convenient to use!
Gabriella Davis (verified owner) –
The tool is great. It’s smaller and not as heavy as a whole nut driver set, but with that said it’s a really big tool. It has a 9/16th driver which is why I bought it over other nut driver sets.
Polly Purdy (verified owner) –
Multiple sizes in one convenient tool are interchangeable 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ and 9/16″ sizes. Multiple sizes in one convenient, too for to get job faster. Also, to lighten your load with multi nut drivers from 6 nuts drivers to one. Awesome. Also, color codes for easy size identification. strong force to rotate for hand tool uses. Wrench assist feature for torque when needed but have not used the wrench yet.The Cushion-Grip handle is comfortable to hold while using those drivers. Very heavy duty drivers.
Rae Stokes (verified owner) –
Not much to really say about it it’s just a great tool.