The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely. Thanks to Automaxx Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2 in. plywood to thick 2×4 boards.
- Holds pocket-hole joints at 90° during project assembly
- Automaxx technology adjusts automatically to material thickness
- Contoured grips for added comfort
- Pin fits securely into pocket hole
- Swivel pad holds mating piece
- Clamp using the pocket hole
- 5 in. (127 mm) reach
Judd Eichmann (verified owner) –
Great clap for using Kreg system
Fae Jerde (verified owner) –
I can always trust Kreg quality and performance
Marina Rogahn (verified owner) –
Worked perfectly to join 2x4s for a fence frame (on the 2x dimension). I would not go much bigger but I would expect it to work well on anything smaller.
Franz Mayert (verified owner) –
It works just like the paper work describes. It is the easiest way to draw a pocket hole joint together.
Jessyca Ernser (verified owner) –
Did what I needed it to do it would be cool to have a few. Kind of a pain in the butt to get it dialed in with size changes
Finn Fritsch (verified owner) –
The auto feature works but the wheel to fix the tension is not convenient to manipulate
Dora Franecki (verified owner) –
Very helpful clamp when assembling boards using pocket holes. The tubular end slides perfectly into the pocket hole and the clamping pad makes firm contact with the other piece. I’m buying more of these.
Kaci Schimmel (verified owner) –
This clamp is perfect for holding corners tight until you’re able to glue and screw in the Kreg fasteners. Professional results. Very satisfied.
Isaias Homenick (verified owner) –
Very easy to use and set just right for cutting.
Florence Stiedemann (verified owner) –
Kreg did not skip a beat
Katlyn Purdy (verified owner) –
Kind of tricky to use at first but enjoy using it now. Use if for most projects.
Amely Ankunding (verified owner) –
My DIY daughter used it while she was helping me with my project and said, “I have to have one of these”!
Ryan Wilderman (verified owner) –
Works great for real wood. But when you use it on finished plywood for cabinets you have to be careful I have damaged the wood.
Chad Kertzmann (verified owner) –
It seems not to fit the pocket holes
Adell Volkman (verified owner) –
Works great! Highly recommend for wood crafters using the Kreg jig.
Marguerite Zemlak (verified owner) –
Kreg Right Angle Clamp work great. Wish they were less expensive.
Naomie Olson (verified owner) –
does what it says
Mckenzie Kozey (verified owner) –
I have been a Kreg jig user for years and finally decided to purchase the clamp since my wife and I are going to do a lot of casing work. I should have bought this YEARS ago! It makes it so simple to get a perfect fit.
Hosea Crist (verified owner) –
Doesn’t work well on stretchers and legs. Clamps at an angle and is difficult to control.
Aniyah Corwin (verified owner) –
Since there are not a lot of options on the market. I went with this one and very happy I did. Works as suggested and automatically ajusts for the size of the workpiece.