Kreg Concealed Hinge Jig
$31.46
Make your drilling process convenient with this Kreg Concealed Hinge Jig. Features rugged design and works with standard chucks.
In stock
Description
The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called Euro hinges) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset and drills to the perfect depth every time thanks to adept stop collar. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. Note: A 1/16 in. bit is required to drill for hinge-mounting screws. Not included. The Concealed Hinge Jig consists of a glass-filled nylon base with a hole that receives a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset which is dictated by each hinge and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results. Just pick out your hinges, look up a few basic mounting instructions that come with them and then set up the Concealed Hinge Jig by adjusting a pair of built-in cams. After that, you are set to drill hinge cup holes using any ordinary drill.
- Make cabinet door installation easy, get drill press accuracy with any hand drill
- Accurate hinge positioning with built-in indexing tabs
- Repeatable results with built-in measuring scales
- Reliable drilling with bit guide and stop collar
- Simple to use with any drill no special tools needed
- Adjustable cams ensure proper hinge offset
- Durable carbide-tipped drill bit included
- Strong, lightweight materials for easy handling
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.55 lbs |
|---|---|
| Dimensions | 8.30 × 9.16 × 2.30 in |
| Individual/Set | Individual |
| Jig type | Drill |
| Material | Nylon |
| Maximum stock size (in.) | 1.5 |
| Minimum stock size (in.) | .5 |
| Model | KHI-HINGE |
| Number of Pieces | 1 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 8.3 |
| Tools Product Type | Power Tool |
Reviews (75)
75 reviews for Kreg Concealed Hinge Jig
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Wiss 9-3/4 in. Compound Action Straight and Right Cut Aviation Snips
Model# M2RS
Cutting Tools
Model# 701-S
Cutting Tools
Model# M6RS
Cutting Tools
Model# A13L
Cutting Tools
Model# 20-045
Cutting Tools
Model# 122100R
Cutting Tools
Model# 849
Cutting Tools
Model# 21010-6-SEN
Keven Kessler (verified owner) –
This jig made cabinet hinges a breeze. It was my first time hanging and hinging cabinet doors.
Jillian Hansen (verified owner) –
This jig saved us $100s by jot having to purchase a drill press when we upgraded our kitchen cabinet door hinges.
Jazlyn Bradtke (verified owner) –
Is excellent for work
Virginia Kemmer (verified owner) –
Did what I wanted it for. Made using concealed hinges a breeze.
Katarina Green (verified owner) –
This product paired with the Kreg Cabinet Hardware Jig, you will be installing cabinets doors like a pro.
Melisa Smitham (verified owner) –
The Kreg Jig works very well. I highly recommend for DIY’rs and experienced woodworkers. It truly simplifies the project.One recommendation for anyone using a hand drill. “Place the project low enough so that you can apply pressure straight down. The tendency to lean forward or backwards will make your cup oblong as well as affect the angle of your screw holes. You may also break or wear out the guide the bit sits in.Only problem I have with this kit is the offset adjustments are only adjustable from 3-6mm in full 1mm increments and not start at 2mm and include 1/2mm adjustments. It would allow for better fine tuning on older cabinets that dont fit into the standard cabinet definitions in use today.If you have a lot of doors, then buy an extra forstner bit. Kreg kit is proprietary, so you have to use their bit with the kit.
Mortimer Wilkinson (verified owner) –
The Concealed Hinge Jig exceed my expectations.
Garnett Hessel (verified owner) –
This product is good and has done well for me so far. I built some doors and used this for the hinges. It works great. I like that the adjustments are made in millimeters. As you can see on the back of the unit, there are angles to the pegs which spaces it out. My only issues are the slots where the woods comes out is too small. I was drilling into walnut and it got stuck and would not drill any more. I had to completely remove it and restart. Also, the plastic used to house the drill portion seems a bit flimsy. I think over time it may wear down from the heat that is caused by friction.
Emmett Wiza (verified owner) –
I was very excited to buy this jig as the crews I buy from Kreg are awesome, my K4 pocket jig works well… and other items…This Hinge Jig feels cheap, there’s limitations from depth of the bit to how deep you can place the jig or where you place it..The most disappointing part was the bit, the bit is not sharp at all and will tear a lot of material and it struggles to cut.I have a lot of Diablo Bits and they cut so smooth. For a DIY that is just starting i guess it’s an okay tool but I wouldn’t recommend it for people that have high exceptions and would want to use this for high end detailed work.
Deron Dooley (verified owner) –
on the negative side package arrived from home depot unopened yet 2 of 6 parts were missing. I immediately called Kreg customer service and explained what happened. They told me i could either exchange it at home depot or that Kreg would send me a new one. I asked them to send me one and they did.I also have the pocket screw jig. I needed a new stop collar, called kreg to buy one and they sent one for freeCustomer Service at Kreg couldn’t be better. I will definitely buy their products in the future
Darian Bauch (verified owner) –
works great
Rudy Greenholt (verified owner) –
Such a fantastic tool! Very easy to use, made perfect hinge cups on 27 cabinets in just a few hours. I can’t imagine trying to do them without this. Worthwhile item!
Elisha Rempel (verified owner) –
Takes the guess work out of hinge layout. Easy and simple to use.
Clifton Gislason (verified owner) –
This Jig is designed well and was easy to setup and use right out of the package.
Gerry Buckridge (verified owner) –
I’v only drilled 8 hinge holes so far, but the jig has worked as described and the bit cuts a super-smooth hole in my red oak doors. Drilling isn’t fast, but the finished result is great! Highly recommend a pair of Kreg Classic 3″ face clamps (sold separately) to speed the setup process along!
Tierra Jenkins (verified owner) –
Item works fine. Did not realize that it is only designed to drill a 1/2 inch depth hole — many hinges are less than this. I machined a washer to make stop work for 7/16 inch depth hinges that I have because 1/2 would have been too much.
Lacey Little (verified owner) –
Kreg products make difficult tasks amazingly simple! I had a cabinet door that needed drilled for European hinges. No one in the store even knew what a forstner bit was). For $29.95, HomeDepot.com made it simple, delivered it for free, and it turned out perfect! GREAT EXPERIENCE!
Bernadine Greenfelder (verified owner) –
Just what I needed, worked great. 5 stars!
Henry Kemmer (verified owner) –
Great basic and very accurate tool!
Janae O’Connell (verified owner) –
Building cabinet doors and used this jig for the hinges. This makes the hole drilling process very easy and straight forward. Very intuitive to set up and use. It is a bit expensive though if only using it for a few doors though.