Kreg 24 in. Rip-Cut Aluminum Circular Saw Guide
$41.97
Bring a spectacular and versatile element to your demanding jobsite with the selection of this exclusive Kreg Rip-Cut Aluminum Circular Saw Guide.
In stock
Description
Great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide. The Kreg® Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut w/ the confidence you want and the precision you need. The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut™ does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 24″—using the built-in measuring scale, and then make your cut. With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut™ makes it easier to cut down large sheets by yourself and is very easy to use. Simply mount your saw to the universal sled—it accepts most left-blade or right-blade saws—and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw.
- Straight, accurate, repeatable rip cuts and crosscuts made easy
- Make rip cuts and crosscuts up to 24 in. W
- Cut multiple pieces to the same size with just 1-setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring and layout lines
- Take your saw to the material instead of having to take your material to the saw
- Universal sled accepts most circular saw left or right blade
- Reversible edge guide for left- or right-handed use
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.45 lbs |
|---|---|
| Dimensions | 2.75 × 8.88 × 30.88 in |
| Color Family | Blue |
| Ideally Used With | Circular Saws |
| Material | Aluminum |
| Model | KMA2685 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 53 in |
| Tools Product Type | Power Tool |
Reviews (73)
73 reviews for Kreg 24 in. Rip-Cut Aluminum Circular Saw Guide
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
Model# 71128
Saw Tracks
Model# TTSAG
Saw Tracks
Model# KMA2700
Saw Tracks
Model# DWS5022
Saw Tracks
Olson Saw 3/16 in. x 3/4 in. Band Saw Guide Blocks for Most 56-1/8 in. Band Saws (4-Pack)
Model# CB50080BL
Saw Tracks
Triton 2 in. x 27.5 in. Track Pack with Connectors for Track Saw
Model# TTSTP
Saw Tracks
Model# 71174
Saw Tracks
Olson Saw 12 mm x 3/4 in. Guide Block for 14 in., 16 in. and 18 in. Imported Band Saws (4-Pack)
Model# CB50055BL
Jefferey Gottlieb (verified owner) –
Excellent tool, Wish I had one earlier. Saves a lot of time. Easy set up.
Cydney Zemlak (verified owner) –
Easy to assemble. Love the way it works.
Keenan Hilpert (verified owner) –
One of the best tools I have bought from kerg. I wish it was little longer in inches other than that the tool is awesome.
Rebekah Dietrich (verified owner) –
Works great for breaking down full sheets of plywood.
Carmel McDermott (verified owner) –
I’m very new to woodworking and….this really helped!
Marcelino Welch (verified owner) –
The right hand set screw for the drill plate would not thread all way in. I had to buy a quarter inch tap and chase the threads. Sloppy quality control. So – doesn’t get 5 stars! Otherwise, it worked well.
Helmer Weber (verified owner) –
Good but not great, worry of breaking the plastic while trying to secure saw to the Kreg and there should be a clamp holding the wood to glide and not let go, because wood keep sliding while cutting it.
Madilyn Ziemann (verified owner) –
The idea is good but the materials is not that strong. It seems like it will not last too long if you use it more than occasionally. Maybe for a DIY like me is just OK. that’s why I’m giving it only 3 stars.
Daryl Lebsack (verified owner) –
Great jig for making straight cuts. This was very useful in making the toy box I just completed. It will be a staple for many other projects.
Frank Wuckert (verified owner) –
Well made, easy to use and helped a novice like me finally cut straight.
Dolly Fisher (verified owner) –
It good on cutting 8 feet or less. You can have success with longer cuts using multiple clamps.
Hollis Macejkovic (verified owner) –
Product was easy to assemble and provided straight cuts without the hassle of using a table saw. This tool made the building of my entertainment center a breeze! Highly recommend for beginners or professionals to use!
Tania Lubowitz (verified owner) –
Doesn’t glide on edge of wood very well
Jaron Schaden (verified owner) –
Great consistent cuts with this guide when setup well. Very happy with this purchase
Eloise Hegmann (verified owner) –
Absolutely love this thing. Makes cutting full size sheets of plywood so much easier, when ripping length wise. No fighting with the portable tablesaw. Lay your sheet on the saw horses and run with it (not literally), but it sure saves time. I was cutting 3 sheets at a time for a large project. I wondered why I hadn’t bought one earlier, big time saver.
Mariana Jacobi (verified owner) –
A great tool to use in conjunction with my Milwaukee Circular Saw. We cut 2 inch and 3 inch strips of MDF board with no problem.
Myrl Miller (verified owner) –
Great tool, generally does what it says, would recommend based on cost and ease, but you need to pay attention to get accuracy of desired cut.
Stuart Pollich (verified owner) –
Excellent tool, easy to assemble, easy to use. Best cuts without a bench saw.
Misael Lesch (verified owner) –
Very useful tool and easy to use.
Osborne Tremblay (verified owner) –
I guess it just depends on what saw you have I have a Milwaukee 61/4 in cordless saw and they way you secure the saw to the clamp is not 100 percent secure. Honestly you probably best just using a straight edge guide