Kreg 5 mm Shelf Pin Jig
$39.97
Kreg Shelf Pin Jig is a perfect tool for adding shelf pin holes to an existing piece of furniture or building shelves from scratch.
In stock
Description
Drill dozens of straight, perfectly aligned holes to precisely the same depth with the Kreg 5 mm Shelf Pin Jig. With an adjustable fence designed to allow for 2 distances from the edge of your workpiece, alignment is virtually foolproof and hole depth is a no-brainer thanks to this user-friendly shelf-pin guide with stop collar. The jig is outfitted with 6 hardened-steel drill guides spaced 32 mm apart that allow straight, true cuts to ensure your next shelving system is wobble-free. An ultra-sharp 5 mm brad-point drill bit is included, as is a locating pin for plotting the right course along your workpiece.
- 6 hardened-steel drill guides allow perfectly vertical holes for wobble-free shelf placement
- Removable, dual-position fence allows holes to be drilled from 1 of 2 distances from the workpiece edge
- Standard 32 mm hole spacing allows proper support and balance of shelving
- Includes 5 mm brad-point drill bit
- Includes locating pin for fast, accurate registration
- Built-in storage for locating pin, drill bit and depth collar
- Comes with complete owner’s manual
- Hardened-steel Kreg drill guides are guaranteed for life
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.68 lbs |
|---|---|
| Dimensions | 9.62 × 5.12 × 1.62 in |
| Individual/Set | Individual |
| Jig type | Drill |
| Material | Plastic |
| Maximum stock size (in.) | 8 |
| Minimum stock size (in.) | .5 |
| Model | KMA3220 |
| Number of Pieces | 1 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 4.25 in |
| Tools Product Type | Power Tool |
Reviews (69)
69 reviews for Kreg 5 mm Shelf Pin Jig
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 701-S
Cutting Tools
Model# 2100-9
Cutting Tools
Model# 8501H
Cutting Tools
Model# 4212
Cutting Tools
Model# 849
Cutting Tools
Wiss 9-3/4 in. Compound Action Straight and Left Aviation Snips
Model# M1RS
Cutting Tools
Model# 21-295
Cutting Tools
Model# 122100R
Jeffery Tromp (verified owner) –
This was perfect for drilling a million holes. A must have.
Maggie Russel (verified owner) –
Very easy to use and accurate peg-hole placement. It comes with easy to understand instructions and bit storage underneath the jig.
Benedict O’Keefe (verified owner) –
Great product, would have given it a 5 if the body was metal. The jig tends to flex when you clamp it
Queenie Lebsack (verified owner) –
Worked great, used it to make a bookshelf with adjustable shelves
Caroline Kreiger (verified owner) –
Every weekend woodworker needs one of these in their toolbox!
Maria Streich (verified owner) –
It’s what I was wanting for along time
Maverick Williamson (verified owner) –
Excellent product, very easy to use.
Eudora Wisoky (verified owner) –
Such a handy jig! Bought this mainly for shelf pin holes in a new pantry I built for our kitchen remodel. But I am sure I will be using it for many other projects.As many others have said, this is incredibly easy to use. I did watch a video and read the directions a bit, just to be sure, but you could figure it out just by messing around.Put 4 sets of holes, with about 30 holes each in the pantry and they were all dead on level. Shelves sit perfectly.Also nice it comes with different ways of using it, such as up against a rail or just on the edge of a board.Even though it’s plastic, the plastic is pretty heavy duty and the drill holes have metal inserts, so sure this will last a long time.My only criticism is the drill bit that comes with it does not leave the cleanest holes, least it did not for me. I’ll be looking for a better bit, if they are out there. One other thing, it’s very handy that most everything has spots in the back of the jig for storing the parts of the jig, all except the allen wrench to tighten the stop collar for the drill bit. Guess they forgot. 🙂
Stevie Blick (verified owner) –
This is so much easier to line up your holes instead of marking with a tape measure on both sides. With the metal bit guide makes it so much more accurate.
Johnnie Koepp (verified owner) –
works exactly as advertised.
Georgette Sipes (verified owner) –
Used this to add an adjustable shelf to a cabinet I was building for the laundry. Worked well, even when I added some holes after the cabinet was built.
Elisha Abbott (verified owner) –
It was easy to put together. My daughter and I are glad we got two.
Pinkie Macejkovic (verified owner) –
The jig worked as advertised. However, there needs to be an instruction added to the manual to explain about how to clamp the device. When I first used it, the jig slipped while drilling and my holes were not aligned because the clamp was not tight enough. I had to tighten the clamp significantly to keep it in place while drilling. After that it worked great!
Timmothy Robel (verified owner) –
Work great. Made the job simple and quick
Ebony Altenwerth (verified owner) –
Able to complete shelving unit in great time. Jig provides what is necessary for 5mm holes. Enjoyed using it. Be careful not to press too hard when drilling or you will shave off some of the blue plastic . Not overall concerned by it but something I found.
Susana Carter (verified owner) –
A great tool. I wanted to place shelves in a long, narrow cabinet. Not sure how I would have done it without this jig.
Melany Hill (verified owner) –
Easy to use works great would recommend this product
Hosea Trantow (verified owner) –
I had a little bit of difficulty in setting up the jig. Once I learned it worked well. I recommend working on a scrap piece first . Always begin with a reference end piece or you can get out of line and wind up with a off centered shelf.
Maya Homenick (verified owner) –
Works perfectly as intended.
Odie Feest (verified owner) –
Easy to use and well made