Kreg 8.25 in. Mini Jig Pocket Hole Kit
$22.32
Mini Jig Pocket Hole Kit from Kreg is an ideal choice for any repair applications such as tightening a chair or table rail to the leg.
In stock
Description
The Kreg 8.25 in. Mini Jig Pocket Hole Kit comes with 1 hole mini jig, step drill bit, depth collar and Allen wrench. This kit was designed without an alignment fence, allowing you to clamp it at virtually any angle or orientation to the edge of your workpiece. This kit is ideal for when the project is already assembled and needs an extra pocket hole or when you need to repair something, such as tighten a chair or table rail to the leg.
- Single-drill guide design
- Unlimited material thickness and width positioning
- Hardened steel drill guide with lifetime manufacturer warranty
- Glass-reinforced nylon jig body
- For small- and medium-sized workpieces
- Fenceless design for precise adjustments to angle and stock depth
- Note: product may vary by store
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | .35 lbs |
|---|---|
| Dimensions | 9.00 × 3.25 × 1.75 in |
| Individual/Set | Individual |
| Jig type | Drill |
| Material | Plastic |
| Maximum stock size (in.) | 0.185 |
| Minimum stock size (in.) | 0.1 |
| Model | MKJKIT |
| Number of Pieces | 4 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 3.25 in |
| Tools Product Type | Power Tool |
Reviews (83)
83 reviews for Kreg 8.25 in. Mini Jig Pocket Hole Kit
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 849
Cutting Tools
Stanley 27.75 in. Adjustable Angle Clamping Miter Box with 22 in. Saw
Model# 20-800
Cutting Tools
Model# M5RL
Cutting Tools
Model# E5
Cutting Tools
Model# K4H
Cutting Tools
Model# 122100R
Cutting Tools
Model# A13L
Cutting Tools
Model# 0190MC
Eleazar Reinger (verified owner) –
This was cheaper than buying just a drill bit that did NOT come with a set ring.
Hulda Jacobi (verified owner) –
I suggest getting the larger version that attaches to your vise. But does the job its supposed to.
Mazie Cartwright (verified owner) –
Such a helpful tool!
Lenore Carter (verified owner) –
The jig worked very well. I wish I purchased one sooner. Only thing I don’t like is I see some peices of blue plastic when drilling no matter how careful I am. It looks like the larger jigs are metal the whole way where the bit is inserted.
Gloria Daniel (verified owner) –
Simple, easy to use. Great addition to my tool box. Just follow the instructions.
Cassandra Turner (verified owner) –
Overall great product for pocket joints. After messing around wit the jig on multiple hole projects i was frustrated that i did not buy more expensive model that incororated claps and multile holes. Also foind it frustrating using switching between diferent thickness materials. I felt like i spent more time trying to figure out how to position the jig than i would have if i would have done my himework and spend more money for better features.
Ari Hill (verified owner) –
Nice tool. Wants to walk if not clamped properly but makes a clean pocket hole.
Mateo Gerlach (verified owner) –
Used this jig for about 30 screws and it worked well. However the instructions on where to place the jig seemed to be incorrect. I would suggest trying it on a piece of scrap first.
Kara Stiedemann (verified owner) –
The product is great, but I wish it had the driver bit with the packaging.. I realized I needed after I started the project. Bit expensive, but I would look for another cheaper product that will do the same job and lower cost.
Halie Stehr (verified owner) –
Great tool
Joana Nitzsche (verified owner) –
Pocket hold jig worked as good as I had hoped!! The directions including distances were accurate and led to easily drilled holes. Great product and a good deal at it’s price!!
Amina Dietrich (verified owner) –
Very useful tool. Works perfectly for what it’s designed for.
Markus Mosciski (verified owner) –
Worked like a charm.
Ulises Littel (verified owner) –
Works great. Fast and easy to use. Just make sure your clamps are tight so it doesn’t slip and change angle if your hole.
Ernestine Tillman (verified owner) –
It works as expected, but it could be better. Measurement notch guides for the wood thickness on the blue plastic and the drill bit would make it easier. Also, a magnet on the jig would make the clamping a little easier. Overall, I think it works great.
Danyka Schuppe (verified owner) –
works perfectly
Nicholas Schaden (verified owner) –
Love this easy to carry tool. Great for those jobs that need that extra hold.
Guy Kertzmann (verified owner) –
It was great, well built & easy to used, you didn’t have to buy the overly expensive vise clamp as a accessory To use, a good old Fashion inexpensive c clamp worked fine
Al Satterfield (verified owner) –
Make your job a lot easier
Presley Hintz (verified owner) –
Good as expected thanks