LulzBot TAZ Pro/Workhorse ABS+ Enclosure

The LulzBot TAZ Pro/Workhorse ABS+ Enclosure is designed to fit your TAZ Pro or Taz Workhorse 3D printer. The enclosure is made of ABS and cast acrylic panels. The cast acrylic panels provides optical clarity, which helps reduce visual distortions.

Assembly is required. You’ll need 3 and 4mm hex drivers (sold separately). You may also need painter’s tape and a flat razor (also sold separately). It will take you around two to three hours, based on skill level. Do not over tighten the screws because the acrylic panels can be cracked very easily.