Makita 5 in. Dust Extracting Surface Grinding Shroud
$41.86
Makita’s new grinder dust shroud is designed to fit Makita 4-1/2 in. – 5 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface. The outside diameter of the extraction port will work with most standard vacuum hose systems. The new dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal.
In stock
Description
Makita’s new grinder dust shroud is designed to fit Makita 4-1/2 in. – 5 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface. The outside diameter of the extraction port will work with most standard vacuum hose systems. The new dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal.
- Soft brushes prevent dust from escaping and help move the tool over the surface
- 4 spring suspension system keeps shroud flush with surface during movement and compensates for blade wear
- Standard hose fitting will work with most vacuum systems OD 1-7/16 in.
- Ideal for concrete finishing, concrete material removal and paint or surface coating removal
Additional information
| Weight | 1.014 lbs |
|---|---|
| Dimensions | 9.00 × 10.00 × 3.00 in |
| Bag Capacity/Dry Volume (cu. ft.) | 0 cu ft |
| Color Family | Black |
| Dust Collection Product Type | Accessory |
| Interior Hose Diameter (In.) | 1.438 in |
| Model | 195236-5 |
| Tools Product Type | Power Tool |
Reviews (29)
29 reviews for Makita 5 in. Dust Extracting Surface Grinding Shroud
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Makita 6.5 Amp 3-1/4 in. Corded Planer Kit with Blade Set, Hard Case
Model# KP0800K
Woodworking Tools
Model# 557
Woodworking Tools
Bosch 12 Amp 2-1/4 in. Corded Peak Variable Speed Plunge and Fixed Base Router Kit with Hard Case
Model# 1617EVSPK
Woodworking Tools
Model# 5625-20
Woodworking Tools
Model# 892
Woodworking Tools
Model# R4331
Woodworking Tools
Model# 5615-24
Woodworking Tools
Model# R24012
Wellington Stracke (verified owner) –
Great no dust
Urban Barton (verified owner) –
Good quality. Thanks!
Duane Hills (verified owner) –
Bought this tool to clean old mortar off a wood subfloor after the old tile was torn out. This helped virtually eliminate the dust. just hooked it up to my shop vac. I’ve attached a pic that shows the first area I did and you can see it took the wood back to natural.
Marco Dicki (verified owner) –
Great attachment worked great on my Makina hand grinder for grinding concrete
Berenice Hartmann (verified owner) –
Didn’t get opportunity to gift the shroud because matching grinder was picked up at HD by someone other than me.So returning shroud.
Izaiah Cassin (verified owner) –
worked well as long as you keep cleaning the filter on the vacuum.
Jean Stehr (verified owner) –
Works just as purported. You will have to clean your vacuum filters often. Standard vacuum hoses slip on and attach with no need for clamps etc. I suggest using a Makita brand diamond wheel with this shroud. Well with the money.
Loma Schaefer (verified owner) –
Wrong attachment for my use,seems well made.
Gracie Collins (verified owner) –
Worked well, except the front part of the shroud kept falling off as I moved the grinder next to the ground. Also my vacuum hose was too loose for the shroud’s dust exhaust. Had to cut a piece of rubber, wedge it in, and clamp it.
Miguel Stokes (verified owner) –
did not fit properly, had to make it work with shim stock.
George Franecki (verified owner) –
Great tool exuded my expectations easy to assembled easy to use it’s just a great tool
Robyn Ward (verified owner) –
Works great with a good vacuum that has a hepa filter.
Ronny Lindgren (verified owner) –
Had to make adjustments on grinder…Doesn’t fit right after adjusting, but got it to work….
Dimitri Herman (verified owner) –
It fit my Bosch angle grinder well HOWEVER I made this purchase because the Makita dust shroud was “Frequently Purchased Along With” the Diamabrush abrasive wheel to strip paint from my deck. Sadly, the Makita dust shroud is far too shallow to enclose the rather deep Diamabrush so the set-up fails.
Gino Baumbach (verified owner) –
I bought this to do some floor grinding. I did not realize it would not fit on my Bosch grinder. Be sure to check for compatability before purchasing. Luckily after some slight modification it fit on my Kawasaki grinder. It works well and seems well build.
Abagail Wunsch (verified owner) –
Fantastic product! Careful though, it will not fit all grinders. It didn’t fit my grinder so I purchased a new Makita Grinder to go with it. It did a great job though. Highly recommend.
Carmen Steuber (verified owner) –
Had to make adjustments on grinder…Doesn’t fit right after adjusting, but got it to work….
Casper Schowalter (verified owner) –
The Makita 4-1/2 in. Dust Collecting Wheel Guard is a shroud covering to contain primarily concrete and paint dust from floor grinding which can be a problem. It gets everywhere and is unhealthy to inhale besides. The wheel guard is tough plastic which I’d say is made of ABS plastic. It has a metal spring and plate mechanism to hold the guard down to the floor. The spring could have been longer to allow for more travel with different wheels. The cover uses a cup wheel and some are deeper than others. Its compact and smaller than I expected and others I’ve seen. A section of the front plastic cover can be removed to get up close to walls with the wheel. The cover has an interesting locking mechanism with a sliding lock. Around the perimeter of the guard is a small brush strip to keep the dust in the guard and out the vacuum exhaust port. The exhaust port is small and fits loosely my 1 1/4” vacuum fitting. The guard does a good job corralling dust if kept up against the floor. The dust is very fine so watch it doesn’t burn out your shop vac motor, clean the filter often and duct tape the port if needed. It does a fine job for its special use of trapping dust.
Stella Thompson (verified owner) –
It worked great.
Nickolas Bernhard (verified owner) –
I got this on the off chance it might fit my non Makita angle grinder but unfortunately it doesn’t. The dust shroud however appears very well made and easy to install.The top that mounts to your grinder has springs and floats which allows you to push the blade down to accommodate different blade thicknesses.It’s hard to tell from the photo listed but a portion of the dust collector comes off to allow you to grind close to edges. It simply slides on and off without tools.