Makita 15 Amp 10 in. Corded Contractor Table Saw with 25 in. Rip Capacity and 32T Carbide Blade
$554.27
Makita Table Saw features with large cutting capacity to handle a range of professional applications. Comes in teal color family.
In stock
Description
This Makita 10 in. Table Saw is versatile with a powerful 15 Amp motor for use in the shop or on the job site. It combines convenience and ease-of-use features with large cutting capacity to handle a range of professional applications. This saw can rip 4 x material in one pass and takes up to a 6 in. x 13/16 in. dado blade. It includes an electric brake, large on/off switch and easy-to-read scale for faster adjustments.
- Powerful 15 Amp motor delivers 4800 RPM for improved performance
- Makes rip after rip without bogging down: large cutting capacity (3-9/16 in. at 90° and 2-1/2 in. at 45°)
- Right extension table allows for greater cutting capacity with the capability to rip 4×8 sheets of plywood
- Extended capacity with up to 25 in. ripping
- Tool-less modular blade guard system with an adjustable riving knife/spreader
- Blade guard assembly with cam lock provides easy tool-less installation or removal
- Adjustable dual side guards allow for ease of measurement from the blade to the rip fence for cutting set-ups
- 2 on-board, independent stowable anti-kickback pawls and riving knife/spreader for through cuts
- Release lever for easy riving knife/spreader height adjustments into 3 different positions for through, non-through and dado cuts
- Guard design lets you see the blade as it contacts the material
- Aluminum die cast, precision machined table top remains flat and true for out-of-the-box accuracy
- Storage to hold most commonly used accessories including blades, wrenches and cords
- 3/8 in. x 3/4 in. T-slot miter gauge grooves accepts commercial accessories with T-formed shanks for versatile cutting
- Saw blade enclosed underneath the table to protect the blade during transport
- 1 year warranty
- Includes: 32-teeth carbide-tipped blade (A-94948) miter gauge (122838-4) push stick (416772-1) wrench 19 (781038-1), wrench 19 (781038-1), socket wrench 13 (782024-5)
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 65.5 lbs |
|---|---|
| Dimensions | 36.00 × 32.00 × 15.25 in |
| Amperage (amps) | 15 |
| Horsepower (hp) | 0 |
| Tools Product Type | Power Tool |
| Table Tilt Right Max (degrees) | 0 |
| Table Tilt Left Max (degrees) | 0 |
| Rip Capacity - Right | 25 in |
| Rip Capacity - Left | 12.5 in |
| Power Tool Features | Blade Guard System, No Tool Blade Change |
| PT Horsepower (Hp) | 0 |
| Model | 2705 |
| Maximum Cut Depth @ 90 Deg. | 3.63 in |
| Maximum Cut Depth @ 45 Deg. | 3.63 in |
| Included Accessories | Blades, Hand Tools, Rip Fence, Side Extension |
| Depth Control | Adjustable |
| Bench & Stationary Tool Type | Table Saw |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Corded Tool Type | Specialty Saw |
| Cord Length (ft.) | 8.2 |
| Construction Material | Alloy |
| Condition | New |
| Color Family | Teal |
| Blade Speed | 4800 RPM |
| Blade Location | Left |
| Blade Diameter (in.) | 10 |
| Blade Diameter | 10 |
| Work Table Surface | in. x in. |
Reviews (61)
61 reviews for Makita 15 Amp 10 in. Corded Contractor Table Saw with 25 in. Rip Capacity and 32T Carbide Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# JR3070CT
Saws
Model# 6480-20
Saws
Model# DW304PK
Saws
Model# 6955-20
Saws
Model# DW311K
Saws
RIDGID Thru Cool 6 Amp 1-Handed Orbital Reciprocating Saw Kit
Model# R3031
Saws
Model# D28715
Saws
Model# DW317K
Santa Brown (verified owner) –
I have Makita everything but this is the first Makita table saw I have bought. I’m using it to build kitchen cabinets right now for a customer. It has the shortest cutting distance from the last three table saws I have owned. The fence guide seems to have a lot of slop in it while adjusting but will lock down firmly and on point. The one great thing about the saw is the high RPMs on 110 outlet can’t seem to feed it to much like a beaver in the forest!
Floy Becker (verified owner) –
Overall great saw and easy to operate. Has power with low cost
Enrique Deckow (verified owner) –
I bought the saw 5 months ago and have been very happy with it. It’s been quite accurate, sturdy, and reliable. I bought separately the extension wing for outfeed support and find that very helpful.
Clarabelle Becker (verified owner) –
Back in the 80s I had purchased a Makita portable table saw still have that saw This new Makita table saw has a lot of new features and same old toughness more money well worth the investment
Laurianne Balistreri (verified owner) –
Didn’t want to buy this yet, but a project made it hard to avoid. My previous experiences with table saws I’ve never really thought of them as precision-type tools. But this Makita gave me far more accuracy than I’ve ever had in a TS before. Cuts more accurately than my Dewalt miter.
Lori Kassulke (verified owner) –
I have not used the saw a lot just yet, but I like it very much so far. The saw is pretty quiet, and I like the blade brake. The saw blade goes up and down real easy, and the fence seems to be reliable. The set up was easy, and the saw works well. I wish the directions for storing the accessories were a little better, but over all I like the saw.
Elva Pollich (verified owner) –
The drill is easy to use. Cuts great!
Eliane Runte (verified owner) –
I would buy this table saw again, it works great
Mallie Rowe (verified owner) –
The saw is excellent except I purchased it thinking it would be like the Makita 2703 or 2702 models. I need a work site table saw that is smaller and lighter. The 2705 is too heavy to lug around even with the portable table that I also purchased. It doesn’t fit in my truck very well either.
Natasha Keebler (verified owner) –
Nice machine. Works well. Would recommend.
Colleen Stark (verified owner) –
The saw blade and the saw guard was easy to assemble based on the instructions.
Jovan Price (verified owner) –
So far, the saw has lived up to my expectations. Time will tell!!
Alize Fritsch (verified owner) –
So far, the saw has lived up to my expectations. Time will tell!!
Claudia Boyle (verified owner) –
The Saw performance and quality of cut are excellent. I rated this as good due to the dust connection. It does collect quite a bit of saw dust but there’s more that comes out the front and underneath the saw. This an issue since I mounted the saw on a table. Now it required an opening through the table for saw dust.
Bertram Fisher (verified owner) –
I bought this saw after having to return several others for fence alignment issues. I decided to spend the extra money to rid myself of the headaches of setting them up and returning the lesser brands. I’m so happy I did. this saw is quiet, strong and has the deepest cutting depth of its class. Definitely a good saw for the money.
Marisol Bogan (verified owner) –
It met every expectation I expect from a Makita tool.
Johnathan Herman (verified owner) –
No disappointments NICE SAW
Trudie Blanda (verified owner) –
I needed to mill some 2″ oak into 2×4’s and 2×2’s. My 10″ Craftsman table saw I didn’t even try as I knew it would be a struggle to mill this 2″ oak and I didn’t want to get into a position that could be dangerous. This Makita 10 inch table saw was up to the task and did the job with ease. Not quite like butter but for oak it really did a good job. I look forward to many years of good service from this saw. Once I saw the size of this table saw I ordered the Makita stand also. They work great together as the saw is to big to move around without a movable stand. A bit more money for this saw and stand. Very nice saw and I would do it again. This was worth the money.
Whitney Borer (verified owner) –
Would have gotten five stars if it could be fitted with a zero clearance throat plate. I think that is a should be.
Orion Schaden (verified owner) –
Easy to assemble. Cuts true and much better than my old table saw. The table is the right size and the extension is simple to use. The rip fence is solid and simply to use. You won’t be disappointed with this saw