Makita Impact GOLD Torsion Magnetic Insert Bit Holder
$6.25
Makita Impact GOLD is new innovation in fastening with a full line of insert bits, bit holders, nut setters, socket adapters and more. Impact GOLD is designed exclusively for use with high-torque impact drivers and is engineered with high-strength steel for longer life. The Impact GOLD Torsion Magnetic Insert Bit Holder features Xtreme Torsion Technology, which allows the torsion section of the bit holder to flex under load and take pressure off of the bit tip for increased durability in high torque applications. The two-piece design is engineered to allow the torsion technology to fully activate. The Makita Impact GOLD Torsion Magnetic Bit Holder is ideal for use with Impact GOLD Insert Bits (sold separately) and is engineered for driving screws in a wide variety of demanding applications including deck building, framing, installing plywood subfloor and more.
In stock
Description
Makita Impact GOLD is new innovation in fastening with a full line of insert bits, bit holders, nut setters, socket adapters and more. Impact GOLD is designed exclusively for use with high-torque impact drivers and is engineered with high-strength steel for longer life. The Impact GOLD Torsion Magnetic Insert Bit Holder features Xtreme Torsion Technology, which allows the torsion section of the bit holder to flex under load and take pressure off of the bit tip for increased durability in high torque applications. The two-piece design is engineered to allow the torsion technology to fully activate. The Makita Impact GOLD Torsion Magnetic Bit Holder is ideal for use with Impact GOLD Insert Bits (sold separately) and is engineered for driving screws in a wide variety of demanding applications including deck building, framing, installing plywood subfloor and more.
- Magnetic bit holder for increased convenience
- Xtreme torsion technology is engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
- 2-piece design is engineered to allow the torsion technology to fully activate
- High-strength tatara steel for longer life
- Ideal for use with Makita impact gold insert bits (sold separately)
- Ideal for driving screws in a wide variety of heavy-duty fastening applications including deck building, framing and installing plywood subfloor
Additional information
| Weight | .72 lbs |
|---|---|
| Dimensions | 0.50 × 1.90 × 6.75 in |
| Drill Bit Type | Bit Extender/ Holder |
| Drill Bit Type(s) Included | Bit Extender/ Holder |
| Drive Size (in.) | .25 |
| Individual/Set | Individual |
| Magnetic | Yes |
| Model | B-35106 |
| Number of Pieces | 1 |
| Product Length (in.) | 6.75 |
| Shank Diameter | 1/4 in |
| Shank Style | Hex |
| Tools Product Type | Power Tool |
Reviews (17)
17 reviews for Makita Impact GOLD Torsion Magnetic Insert Bit Holder
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-28-1010
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 282269
Drill Bits
Model# DW2542
Drill Bits
Bosch 20 in. Hammer Steel 1-1/8 in. Hex Moil Point Chisel for General Chipping Work
Model# HS2161
Drill Bits
Model# 48-32-2100
Drill Bits
Model# 48-20-8856
Drill Bits
Model# DW2535
Deshawn Harris (verified owner) –
This hefty little holder makes a good match with Makita’s insert bits, although it will also work with any other brand.For just a few bucks more, you get a holder with some heft. The insert end is fairly thick to add to durability. It is a little heavy, but not too much. The throat tolerance is tight, which provides a snug fit for the bits – a very good thing. You want to avoid “play.”And when you use it with matching Makita bits, you’ll get a really good grip on the bits via some subtle features. The bits have small indents on them, and the holder has some raised ridges inside the throat that engage the indents. My macro focus on my camera isn’t working, otherwise I’d provide a picture, so please accept my description. It is an interesting feature that really helps hold the bits. My older, cheaper holder doesn’t have this.And of course there is a magnet to also hold the bit steady.
Keira Labadie (verified owner) –
After trying different bit holders this one is the best, won’t skip too much, hold the screws better and steady
Zechariah Watsica (verified owner) –
Gold bits fit snug in holder with positive lock so bit remains in tool. Not sure if this tool will extend the longevity of the Phillips bits as claimed but it seems to be well made. If the bit holder does extend the life of the bit, it’s a good buy. If not, it’s a little pricey.
Clarissa Kertzmann (verified owner) –
I’ve used a number of torsion bit holders in the past with mixed results. Normally, they just don’t hold the bit in very tightly and tend to strip the heads of the screws out. Not so at all with this holder. The fitment of the bits in the holder is really tight. Plus, it’s magnetized, so not only does it make sure the bits stay firmly in the holder, but also helps to hold the screws to the bit when setting them. I haven’t stripped a single screw with this yet and I can really tell how well this holder transfers the power of the impact driver down to the bit itself. Just a great tool!
Chaya Donnelly (verified owner) –
A great extension bit and holder. Its magnetic end holds the bits in place and in some cases the tip of the bit becomes magnetized and allows it to hold the screw on the end of the bit making it easy to guide smaller screws like for electronics back into the holes without having to fight the process.
Marisol Muller (verified owner) –
The only bit holder I could find that would lock into my Bosch IDH182-02 impact really heavy built bit stays locked in real well
Ike Trantow (verified owner) –
This is a good tool. It is the same as the blue Magnetic bit holder except it is not magnetic. If you don’t need the magnet to hold the screw it is your tool.
Liam Reinger (verified owner) –
Works great. Magnet is strong.
Ettie Goodwin (verified owner) –
Great bit holder . It grips bits real tight I’ve had to use pliers to remove new bits maybe it’ll release easier after some use I have no reservations In recommending this bit holder .
Wilhelmine Cormier (verified owner) –
Like most people, I have several of these bit holders from a handful of different brands and, yet, this is the only one I need. Far and away superior to the others, most of which are big brand. Magnet is strong with absolutely zero wobble. I use with Makita’s impact gold bits and can’t imagine needing anything better. Exemplary products.
Hermina Mosciski (verified owner) –
Love it! Great product
Barton Ziemann (verified owner) –
I was a little disappointed that it didn’t have the slide screw stabilizer, but it does hold the screwdriver tip so that it doesn’t come out of the bit holder. I have dropped many a screwdriver tip into the tall weeds when it came out of the bit holder and then fell into the weeds.The magnetic quality holds the screw on the bit holder until you have the material ready to put the screw into the material.They do recommend that you use a Impact Gold tip because they will not be destroyed by the constant pounding of the impact driver.
Juana Friesen (verified owner) –
This is a good tool. It is the same as the blue Magnetic bit holder except it is not magnetic. If you don’t need the magnet to hold the screw it is your tool.
Pablo Flatley (verified owner) –
Why wont it ever break! This is wellmade and high-quality. It will last longer than most other ones
Wava Hessel (verified owner) –
Exactly what I was looking for!
Dayna Ortiz (verified owner) –
I’ve had two of these come apart in the past, and I don’t really know what caused it, they just gave up. This is the sturdiest, and most promising I’ve seen yet. It seems to be made of heavier materials that I hope will give me a much longer service life.
Harley Weimann (verified owner) –
I have used several brands of “magnetic” bit holders over the years, some of them more expensive than this one, and invariably, my bit would fall out or stick to the screw coming of the holder on occasion. I read the reviews on this and thought, ok, i’ll give it a try. right out of the package, this was different, the bit clipped into the holder, and the magnet was much stronger. I was able to build an entire barn without losing a bit, screws stuck to the bit extremely well, saving me tons of time foraging for dropped screws as in the past. some reviewers wrote of having trouble taking a bit out to change it because it is clipped in, not a problem, I bought one of these holders for each style of bit I use. philips #2, square #2, and two sizes of star bits, totally worth it. I buy and use my screws by the 25 pound pail, only because I can’t find 50 pound buckets……. the only problem I had was when removing screws, the magnet is so strong, it will retain the screw and instead of just falling into your hand, you have to physically take every screw off the bit, not a problem when you have one screw to remove, but when dismantling hundreds, it would become tiresome. I just used one of the other brands for removing screws. that being said, this is hands down the best bit holder I have ever used….