Makita 6.6 Amp 3/4 in. Corded Hammer Drill with Torque Limiter Side Handle Depth Gauge Chuck Key Hard Case
$99.00
The Makita 6-3/5 Amp 3/4 in. Hammer Drill comes with torque limiting clutch to reduce gear damage by automatically disengaging gears. It features positive stop mode selector to prevent accidental mode disengagement.
In stock
Description
The Makita 3/4 in. Hammer Drill is powered by a 6.6 Amp motor that is engineered for the most demanding applications. The HP2050 features a torque-limiting clutch that disengages automatically if the bit binds and a positive-stop mode selector that helps prevent accidental mode disengagement. Additional features include less weight (only 5.6 lbs.) a large trigger switch and an ergonomic rubberized grip for increased comfort.
- Powerful 6.6 Amp motor for the most demanding applications
- Conveniently-located 2-mode switch allows for fast mode changes between rotation only and hammering with rotation
- Variable 2-speed (0-1,200 and 0-2,900 RPM) with variable speed control dial
- Built-in clutch engineered to reduce gear damage by automatically disengaging gears if bit binds
- Positive stop mode selector prevents accidental mode disengagement
- Large trigger switch and 360° swivel side handle for added comfort
- Recessed lock-on button for continuous use
- All-ball bearing construction for longer tool life
- Ergonomic rubberized grip for increased comfort on the job
- Includes: side handle (153503-4), depth gauge (324219-0), chuck key (763430-3), tool case
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 5.6 lbs |
|---|---|
| Dimensions | 16.80 × 12.90 × 4.50 in |
| Amperage (amps) | 6.6 |
| Blows per Minute (BPM) | 58000 |
| Chuck Size | 1/2 In. |
| Chuck Type | Keyed |
| Color Family | Teal |
| Condition | New |
| Cord Length (ft.) | 8.2 |
| Corded Tool Type | Hammer Drill |
| Cordless/ Corded | Corded |
| Drill/ Driver Type | Hammer Drill/ Driver |
| Included | No Additional Items Included |
| Maximum Speed (RPM) | 2900 RPM |
| Model | HP2050 |
| Power Tool Features | Bag Included, LED Light, Second Handle Included, Variable Speed |
| Tools Product Type | Power Tool |
Reviews (59)
59 reviews for Makita 6.6 Amp 3/4 in. Corded Hammer Drill with Torque Limiter Side Handle Depth Gauge Chuck Key Hard Case
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
Milwaukee 5.5 Amp Corded 1/2 in. Variable Speed Hole Shooter Magnum Drill Driver
Model# 0234-6
Drills
Model# DW272
Drills
Model# DA4031
Drills
Model# R70011
Drills
Model# 1007-1
Drills
Model# 11263EVS
Drills
Model# 285703
Dessie Gutkowski (verified owner) –
Very powerful but at the same time is very easy to use.
Orpha Ruecker (verified owner) –
Great tool…
Cole Parisian (verified owner) –
Excellent product. Lightweight and easy to operate
Colby Baumbach (verified owner) –
Light weight small , just alittle noisy
Marcelo Dibbert (verified owner) –
Bought this drill to put achors in a stamped concrete patio for a pergola. I’ve never used a hammer drill before this one. The drill easily drilled the four inch holes with a 3/8 inch bit and did not bind or lag at all. The look and feel of this tool is excellent and it was very easy to use.
Lavina Hills (verified owner) –
I recently purchased this drill from the local Home Depot despite reading several (seemingly misinformed) critical reviews. A lot of the reviews I’ve seen for this drill have mentioned the chuck slipping after little to no use. The only way that would be possible is if you use drill bits with a round/straight shank. If you use drill bits meant for a hammer drill (which usually have hex shanks, SDS, triangle shanks, etc.) then there should be no reason for the chuck to slip. Put simply, do not use round/straight shank bits with this drill and you won’t have a problem with the chuck.Now the 3/4 in. listed in the product description doesn’t refer to the chuck size, which is 1/2 in., but rather refers to the largest bit recommended for this tool. In other words, the biggest bit you should use with this drill is a 3/4 in. with a 1/2 in. shank. You can find this by expanding the product details. Since this drill is meant for 3/4 in. bits and smaller, it probably isn’t a good idea to use this tool for heavy tasks like mixing concrete. That puts a lot of torque on a motor this size, and will probably burn it up. If that’s your intent, get a bigger drill. This one is intended for much smaller tasks.I’ve only had it a couple of days, so I can’t speak to longevity, but it seems sturdy and has performed flawlessly at drilling pilot holes into 50 year old cinder block. I’m pleased so far.
Mandy Kihn (verified owner) –
Excellent tool
Augusta Moore (verified owner) –
Drilled thru our back porch cement easily, with no smoke or hassles. Hubby says it’s a great brand.
Madelynn Schinner (verified owner) –
Great drill, great price
Micah Greenfelder (verified owner) –
Good product. I bought this hammer drill to set anchor holes for post.on my concrete poarch.
Giles Sawayn (verified owner) –
Works well! I was going to rent one as these used to be big money, but why rent one when it was this cheap to own!
Ryan Buckridge (verified owner) –
Was able to run a 2 1/4in bit through Doug fir 4x4s no problem
Conner Pfannerstill (verified owner) –
It’s really powerful,easy to use and does delivery exactly what’s designed to do. Easy to adjust side handle. I am a Dewalt guy but I am rethinking my loyalty. I am impressed
Kacey Tillman (verified owner) –
Muy bueno
Chadd Balistreri (verified owner) –
EXCELLENT TOOL !!!
Winona Wisoky (verified owner) –
Worked as expected
Dave Blick (verified owner) –
Went through cement blocks like butter!!
Arlie Morar (verified owner) –
This drill works very well for drilling steel, concrete, thick wood and other demanding materials. I especially like the two speed function. However, it is heavy and also not suitable for driving screws (an impact driver is the right tool) I would not recommend this if you are just looking for an around the house light duty drill, but it is great for heavy duty use.
Luna Kulas (verified owner) –
The chuck key is easily lost and is an odd size. The trigger lock can stick and cause the drill to keep twisting when it hangs up. Can potentially twist the operators arm. It even twisted up the electrical cord and shorted it out where the cord broke. A safety issue! Works well good price!