Makita 7 Amp 1-1/8 in. Corded SDS-Plus Concrete/Masonry Rotary Hammer Drill with Side Handle and Hard Case
$299.00
This Makita 1-1/8 in. Rotary Hammer Drill can work in any of 3 modes of operation: rotation only, hammering with rotation and hammering only. The drill’s hammering action is disengaged when the drill is idle, which reduces fatigue. The 6.7 Amp motor can produce as many as 4500 BPM ― enough hammering for many tough tasks. It also has an LED light that shines on the work surface so you can see what you’re doing. A padded grip and side handle provide more comfort and control.
In stock
Description
This Makita 1-1/8 in. Rotary Hammer Drill can work in any of 3 modes of operation: rotation only, hammering with rotation and hammering only. The drill’s hammering action is disengaged when the drill is idle, which reduces fatigue. The 6.7 Amp motor can produce as many as 4500 BPM ― enough hammering for many tough tasks. It also has an LED light that shines on the work surface so you can see what you’re doing. A padded grip and side handle provide more comfort and control.
- Includes hammer drill, side handle, depth gauge and tool case
- Delivers 2.1 ft. lbs. of impact energy to handle the most demanding applications
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Torque-limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- 1-touch sliding chuck for quick bit changes
- Recessed lock-on button for continuous operation
- Ergonomic l-shaped handle with rubberized soft grip for increased comfort and control
- Engineered with field core, interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Extended life brushes for more work between service intervals and less downtime
- 1-year warranty
- Makita motor advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Includes: side handle, depth gauge, tool case
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 7.7 lbs |
|---|---|
| Dimensions | 16.70 × 15.10 × 4.90 in |
| Amperage (amps) | 7 |
| Blow energy (ft.-lb.) | 2.1 |
| Chuck Size | 1-1/8 In. |
| Chuck Type | SDS-Plus |
| Color Family | Teal |
| Condition | New |
| Cord Length (ft.) | 13 |
| Cordless/ Corded | Corded |
| Drill/ Driver Type | Rotary Drill |
| Included | No Additional Items Included |
| Maximum Speed (RPM) | 1100 RPM |
| Model | HR2811F |
| Power Tool Features | Case Included, Variable Speed |
| Tools Product Type | Power Tool |
Reviews (18)
18 reviews for Makita 7 Amp 1-1/8 in. Corded SDS-Plus Concrete/Masonry Rotary Hammer Drill with Side Handle and Hard Case
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversible Hammer Drill
Model# DW511
Drills
Model# 0302-20
Drills
Model# 0299-20
Drills
Model# 0233-20
Drills
Milwaukee 13 Amp Corded 1/2 in. Super Hawg Hole Hawg Right Angle Drill Driver
Model# 1680-20
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversing Drill
Model# DW235G
Drills
Model# DW272
Maymie McKenzie (verified owner) –
I rented one of these for drilling into granite in my backyard. Job turned out to be bigger than I expected so I ordered one online. It arrived a few days later and worked great, glad I bought it.
Gloria Huels (verified owner) –
It works good for drilling holes but core drilling has its problems. I would recommend a drill with higher RPM.
Bennie Daniel (verified owner) –
Bought one last night because my SDS Max drill won’t drill less than 1/2″ holes. This thing drilled about (30) 1/4″ holes in concrete in a combined time of about 3 minutes. It just blew right through the concrete…took zero effort. Most of my tools are Makita, and have been for a while, because of this level of performance.
Chadrick Hermann (verified owner) –
Hi good day, the item is working very well and I have high review
Annabelle Emard (verified owner) –
This Rotary Hammer is amazing. I have used hammer drills before taking up ti 20 min per hole. This one cut through 5 inches of concrete in about a minute. The built in shock absorber in the handle eliminates almost all vibration in the hand. This tool is well built, well balanced, easy to operate. Can’t say enough good things about it. Highly recommend.
Tre Johnson (verified owner) –
I use it for commercial construction and is very durable and dependent. This is the type I have been buying for 10 years. Just make sure to grease the chuck from time to time or the end of bits to keep the bearings from locking.
Lionel Oberbrunner (verified owner) –
I rented one of these for drilling into granite in my backyard. Job turned out to be bigger than I expected so I ordered one online. It arrived a few days later and worked great, glad I bought it.
Frederic Kshlerin (verified owner) –
Great hammer drill! Took tile up with ease and drilled thru concrete with the quickness. I also jackhammered thru 4 inches of concrete for new plumbing pipes . It wasn’t the quickest, but it made it happen.
Martina Koelpin (verified owner) –
I rented this model from a Home Depot to test it on drilling holes in concrete. It worked great for any application I might have in the future, so I purchased that same make and model. This way I know it will do any tough job I have.
Ross Moore (verified owner) –
Works great!
Nikki Reynolds (verified owner) –
Great drill well worth the $$
Trevion Hermiston (verified owner) –
I bought this Makita rotary hammer drill two weeks ago and must say it’s fantastic. I also have the Bosch bulldog sds plus extreme max and had my coworker use the my Bosch and I used the Makita with 9 other contractors around to witness the Makita blew the Bosch away and I will post the video very soon. Hands down the Makita HR2811F SDS-PLUS ROTARY HAMMER DRILL is a great tool and for those Bosch & Dewalt lovers try this Makita out and you’ll see because now I’m a believer. This is a very powerful rotary hammer drill to be 7amps to drill through concrete like it has a point to make plus chiseled like it was a sds max again try it for yourself.
Justyn Pfeffer (verified owner) –
Used this to drill thirty six, 3/4″ holes for an in-ground pool cover. Anchors had to be right at 2″ deep. Didn’t even break a sweat with this thing. I would’nt buy anything else.
Haleigh Bruen (verified owner) –
Happy with my makita,works like a dream.
Glenna Rohan (verified owner) –
I have used it to put in 12 of 1/2 inch holes for sleeve anchors and cushion absorbtion is great and the hammer is way more than my old dewalt just regular hammer
Lisandro Wilkinson (verified owner) –
Pure joy to use. Drilling 6″ holes in concrete was a breeze. Hammer chisel action also great for removing old concrete parge.
Alana Kuhn (verified owner) –
In one word, Assume power tool.
Hilbert Lesch (verified owner) –
Extremely comfortable and lightweight.Excellent for drilling 3/4 inch holes into concrete in tight spaces.