Makita 10 in. Dual Slide Compound Miter Saw with 10 in. x 80T Micro-Polished Miter Saw Blade
$455.89
Now you can tackle the job with ease and comfort by choosing this Makita Dual Slide Compound Miter Saw with MicroPolished Miter Saw Blade.
In stock
Description
Get a smoother start-up and constant power with not belts to slip or replace with this Makita 10 in. Slide Compound Miter Saw. There is an electric brake for added convenience and you get a smooth, dead-on cut due to the linear ball bearing system. The saw miters 0° to 47° left and 0 to 60° right, with positive stops at 0°, 15°, 22.5°, 31.6° and 45° (left and right). The rear-handle bevel lock is easily accessible with adjustments 0° to 45° (left and right) and positive stops at 0° and 45° (left and right). Use this saw for jobs that involve fine woodworking, carpentry or general construction. This bundle also comes with A-93681 10 in. x 80T Micro-Polished Miter Saw Blade.
- Powerful 13 Amp direct drive motor requires less maintenance and delivers 4,300 RPM
- Miters 0 – 47° left and 0 – 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
- Cuts up to 12 in. at 90° and 8-1/2 in. at 45°
- Linear ball bearing system engineered to deliver dead-on accurate cuts
- Rear handle bevel lock is easily accessible and adjusts 0 – 45° (left and right) with positive stops at 0°, 22.5°, 33.9°, 45° (left and right)
- Less weight (43.7 lbs.) and compact design for job site portability
- Soft start features for smooth start-ups
- Ergonomic rubberized D-handle design for better fit and added comfort
- Large precision machined aluminum base supports material for more efficient cutting
- Electric brake for maximum productivity
- See-through blade guard system for greater visibility of blade and line of cut
- Oversized trigger switch for better fit, added comfort and easier operation
- Includes extension wings for supporting long work pieces
- Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more
- A-93681 – ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting
- A-93681 – Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
- A-93681 – Fully hardened and expertly hand-tensioned steel saw plates for true cuts
- A-93681 – Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 51.7 lbs |
|---|---|
| Dimensions | 21.50 × 33.10 × 19.50 in |
| 45 Degree Crosscut Capacity Maximum | 8.5 |
| Cordless/ Corded | Corded |
| 90 Degree Crosscut Capacity Maximum - Right | 12 |
| Amperage (amps) | 13 |
| Arbor Size | .625 |
| Bench & Stationary Tool Type | Slide Miter Saw |
| Bevel Type | Dual |
| Blade Diameter (in.) | 10 |
| Color Family | Green |
| Condition | New |
| Construction Material | Alloy |
| Cord Length (ft.) | 54 |
| 90 Degree Crosscut Capacity Maximum - Left | 12 |
| Included Accessories | Blades, Dust Blower, Hand Tools, Side Extension |
| Dust Collection Method | Bag |
| Maximum Cutting Thickness (in.) | 3.625 |
| Maximum Degree Miter Cuts - Left | 47 |
| Maximum Degree Miter Cuts - Right | 60 |
| Maximum Speed (rpm) | 4300 |
| Miter Saw Type | Sliding Compound |
| Model | LS1018 |
| Portability | Stationary |
| Power Tool Features | Electric Brake |
| Table Length (in.) | 0 |
| Table Width (in.) | 0 |
| Tools Product Type | Power Tool |
Reviews (66)
66 reviews for Makita 10 in. Dual Slide Compound Miter Saw with 10 in. x 80T Micro-Polished Miter Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW716
Saws
Model# DW304PK
Saws
Model# D28715
Kian Langworth (verified owner) –
Is a good saw for your finish wood work
Eldora Bogan (verified owner) –
The saw operation is of a good quality for a tool in this price range. Changing the mitre angle is simple. Pre-set stops at 22.5 and 45 are very accurate. One drawback is position of “release” button, which must be pressed along with trigger. At some angles it’s awkward getting your wrist in position to do so.
Lily Hamill (verified owner) –
It’s very very good
Cale Tremblay (verified owner) –
Good things are light quite accurate and runs on less amps so voltage drop isn’t a problemor if you want to run a vacuum simultaneously. Bad points the blade guard is noisy and the linear bearings are poor quality.
Casey Cartwright (verified owner) –
It’s good!!! All but the numbers on the table of it when sliding sideways, for both 45 degrees lock in but the tape reader is off on both sides by almost a full degree, so it make it incorrect to use it… that’s the only problem I see it has…
Daron Konopelski (verified owner) –
Saw works awesome! Great saw with a great brand name backing it up. Have an old Makita 10inch chop saw in the family for 30 years, going strong still. Have the same high expectations for the new addition.
Jasmin Waters (verified owner) –
cuts smooth and easy, very nice blade for the money
Coy Schneider (verified owner) –
Great saw, very accurate.
Tyler Kuhn (verified owner) –
Bought this blade to replace my Makita A-93550 70 Tooth Quiet Crosscutter for my mitre saw. I’ve been very happy with it and it’s performed quite well for me, but didn’t see it available on Home Depot. Instead I ordered the 80 Teeth Micro Polished blade which was delivered to my doorstep in a plastic bag with no padding, bubble wrap etc. Who knows what happened between the warehouse and my doorstep but the blade was slightly bent. I made a test cut and found it cut no better than my 70 tooth blade, plus the 80 tooth blade SCREAMS as it cuts, and continues to ring like a church bell long after the blade has stopped moving. If noise doesn’t bother you, the 80 tooth is a decent blade at a good price, but I would have it delivered to the store instead and hold onto your receipt until you’ve inspected it. I opted for having my 70 tooth re-sharpened at Forrest saw blades, which is local to me. Good luck!
Dariana Rice (verified owner) –
This chop saw was ease to assembleI’m happy with wightPerformance it’s amazing
Ernestina Mraz (verified owner) –
Nice clean cuts on my molding saw, good product, good price.
Miles Spencer (verified owner) –
Great blade! Smooth cut every time.
Robyn Kassulke (verified owner) –
I really like all my previous Makita products, which is why I decided to buy this Makita Mitre saw. It starts out real nice and smooth, unlike the jarring crank up to high speed in the old saws. However, after 2 weeks, it seem to develop a wobble and got worse with use. We regularly have to tighten the bolt holding the blade in. Not sure if replacing the blade will solve the problem or not, but we will try that soon.
Alyce Feest (verified owner) –
Works great. To the negative reviewers who say it doesn’t cut straight, the fence IS adjustable. There are 4 bolts. Loosen them, make the fence square, and you are all set. The soft start is nice. The included blade is fine.
Citlalli Lehner (verified owner) –
I have always been a fan of Makita and as much for their utility as their aesthetics. I like my tools to look good and Makita’s always does. Performance is terrific too!
Kirk Paucek (verified owner) –
Very happy with the saw and customer service I received. Thank you!
Harvey Dietrich (verified owner) –
This is a very nice saw… I am very happy with it… cuts clean and makes for tight mitres
Lucienne Konopelski (verified owner) –
Great saw. Makita makes a quality saw.
Edd Murray (verified owner) –
Great piece of equipment.
Flavie Heathcote (verified owner) –
It was a gift. He seemed to have no issues.