Makita 10 in. Dual Slide Compound Miter Saw with 10 in. x 80T Micro-Polished Miter Saw Blade
$455.89
Now you can tackle the job with ease and comfort by choosing this Makita Dual Slide Compound Miter Saw with MicroPolished Miter Saw Blade.
In stock
Description
Get a smoother start-up and constant power with not belts to slip or replace with this Makita 10 in. Slide Compound Miter Saw. There is an electric brake for added convenience and you get a smooth, dead-on cut due to the linear ball bearing system. The saw miters 0° to 47° left and 0 to 60° right, with positive stops at 0°, 15°, 22.5°, 31.6° and 45° (left and right). The rear-handle bevel lock is easily accessible with adjustments 0° to 45° (left and right) and positive stops at 0° and 45° (left and right). Use this saw for jobs that involve fine woodworking, carpentry or general construction. This bundle also comes with A-93681 10 in. x 80T Micro-Polished Miter Saw Blade.
- Powerful 13 Amp direct drive motor requires less maintenance and delivers 4,300 RPM
- Miters 0 – 47° left and 0 – 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
- Cuts up to 12 in. at 90° and 8-1/2 in. at 45°
- Linear ball bearing system engineered to deliver dead-on accurate cuts
- Rear handle bevel lock is easily accessible and adjusts 0 – 45° (left and right) with positive stops at 0°, 22.5°, 33.9°, 45° (left and right)
- Less weight (43.7 lbs.) and compact design for job site portability
- Soft start features for smooth start-ups
- Ergonomic rubberized D-handle design for better fit and added comfort
- Large precision machined aluminum base supports material for more efficient cutting
- Electric brake for maximum productivity
- See-through blade guard system for greater visibility of blade and line of cut
- Oversized trigger switch for better fit, added comfort and easier operation
- Includes extension wings for supporting long work pieces
- Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more
- A-93681 – ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting
- A-93681 – Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
- A-93681 – Fully hardened and expertly hand-tensioned steel saw plates for true cuts
- A-93681 – Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 51.7 lbs |
|---|---|
| Dimensions | 21.50 × 33.10 × 19.50 in |
| 45 Degree Crosscut Capacity Maximum | 8.5 |
| Included Accessories | Blades, Dust Blower, Hand Tools, Side Extension |
| Table Width (in.) | 0 |
| Table Length (in.) | 0 |
| Power Tool Features | Electric Brake |
| Portability | Stationary |
| Model | LS1018 |
| Miter Saw Type | Sliding Compound |
| Maximum Speed (rpm) | 4300 |
| Maximum Degree Miter Cuts - Right | 60 |
| Maximum Degree Miter Cuts - Left | 47 |
| Maximum Cutting Thickness (in.) | 3.625 |
| Dust Collection Method | Bag |
| 90 Degree Crosscut Capacity Maximum - Left | 12 |
| Cordless/ Corded | Corded |
| Cord Length (ft.) | 54 |
| Construction Material | Alloy |
| Condition | New |
| Color Family | Green |
| Blade Diameter (in.) | 10 |
| Bevel Type | Dual |
| Bench & Stationary Tool Type | Slide Miter Saw |
| Arbor Size | .625 |
| Amperage (amps) | 13 |
| 90 Degree Crosscut Capacity Maximum - Right | 12 |
| Tools Product Type | Power Tool |
Reviews (66)
66 reviews for Makita 10 in. Dual Slide Compound Miter Saw with 10 in. x 80T Micro-Polished Miter Saw Blade
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW317K
Saws
Model# DW311K
Saws
Model# 6955-20
Saws
Model# D28715
Saws
Model# DW331K
Santina Legros (verified owner) –
Very sharp and fast cut
River Dach (verified owner) –
Blade has extremely clean cuts. Very good value for the money.
Charlene Shanahan (verified owner) –
This is a very good saw blade for making mitered cuts in baseboards, moldings, and casings. The cut is so fine, sanding of the cut edge isn’t really necessary.
Durward Connelly (verified owner) –
Cuts well on my ls1016l. Gotta love Makita
Breanne Spinka (verified owner) –
I have been doing my research with a lot of product but this one stood out and after I purchased it now know why. At first I thought I would be bias because I own a lot of tools of this brand but this saw is perfect and is easy to use and move around. Do I recommend this saw, I sure do.
Allie Hickle (verified owner) –
Great saw! What else can I say?
Lexi Jacobi (verified owner) –
Very easy to work with. Great power to cut all types of wood.
Riley Predovic (verified owner) –
It did everything that I thought it would do. I got a 60 tooth blade on my sliding Mikita saw and it worked great.
Gabriel Johnston (verified owner) –
Super nice and smooth
Anika Wiza (verified owner) –
I like the ease of cutting and the slide bars. The adjustments are real simple ie. changing the bevel angles.
Rex Mills (verified owner) –
Just received shipment of the New LS1018. Finally had to bury my Hitachi CF82B after 22 years of rock solid service. About the Makita, I decided to upgrade to a 10 inch slider from my 8-1/2 inch. I recently purchased the newer Dewalt 10 inch Jobsite saw after also putting to rest a 8-1/2 inch Makita table saw.I read the reviews, largely mixed, on the LS1016 and did not want the risk.Pros:Out of the box, the saw’s settings were dead on. The blade, only a 40 tooth, will be good for rough materials but not for trim work. The rail mount and base are solid, no play whatsoever. Again brand new, so time will tell. No blade wobble. I heard in numerous reviews this was an issue with the LS1016.The indents are secure.Cons:No light or laser. I am not a big laser fan but an led would be nice. The rail operation is not very smooth, especially when you get beyond 8 inches. It becomes extremely rough. It could be packing grease or again just needs a break in period. Rotating the table is very stiff and hard to make single degree adjustments. The mount for the depth setting is not aligned with trenching tab.The cord end should have had the capture clasp that is pretty standard on all large power tools. The dust bag closure system is quirky and will not hold up like a quality zipper.Conclusion:Again, this is a new saw to me. I will be putting it to a lot more service in the future. I think Makita cut some engineering corners on this saw. 13amp instead of keeping the15amp, Taped on degree indicator, cord and dust bag issues previously mentioned. Hitachi set the bar high over 25 years ago with quality albeit Japanese made. Hope this Makita will make it through my twilight carpentry years.
Kyleigh Schiller (verified owner) –
Is good saw just got something different thank you
Zora White (verified owner) –
Saw seems to be a good compromise between capability, weight, and blade diameter. I have 10-inch tablesaw, and wanted a common blade. Saw used styrofoam packaging which I dislike. Not recyclable where I live; filled an entire garbage can.
Kelly Welch (verified owner) –
Smooth cuts on 1 x 12 red oak. Great for fine ripping.
Jacinto Daugherty (verified owner) –
The purchase through Home Depot online was flawless. I received text messages when my order was confirmed, shipped and when it arrived. The saw is amazingly east to learn and work. It’s nice and sturdy, doesn’t have the cheaply made feeling. I’m very happy so far. The only downfall is the blade was only 40t and had to purchase another for finnish work.
Constance Hickle (verified owner) –
Great saw! It was accurate out of the box.
Patience Romaguera (verified owner) –
Great saw out of the box!!!!!
Danyka Thompson (verified owner) –
This is an excellent miter saw in all respects: durability, price-point, features, ease-of-use. In the months since I purchased this saw, I have used it to cut various types of molding and to build all manner of backyard projects requiring some very tricky miter cuts. I have carried the saw around to various places (yes, it is heavy, and I am 67, but I can easily lift it and carry it around if need be). I haven’t had to bolt it down or otherwise attach it to anything while working; it is solid. I have found that the pre-set angles are very reliable, and I have had no problems setting and making any manner of custom angle. I love it!
Jannie Batz (verified owner) –
perfect
Eloisa Kozey (verified owner) –
I use this blade on my 10 inch Craftsman table saw and it worked very well