Makita 15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser with Bonus Pneumatic 2 in. 18-Gauge Brad Nailer
$698.00
In stock
Description
The Makita 10 in. Dual Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you will get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8 in. capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4 in. baseboard, capacity, it can cut 4 x 4 dimensional lumber in 1-pass. It’s ideal for fine woodworking, carpentry, general construction and more. The LS1019L is powered by a 15 Amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high. This Promotion also comes with a bonus AF506 2 in. Brad Nailer, 18 Gauge.
- LS1019L – 10 in. slide miter saw with the crown molding cutting capacity (6-5/8 in. nested) of a 12 in. miter saw
- LS1019L – Linear ball bearing system engineered to deliver dead-on accurate cuts
- LS1019L – Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4 in.)
- LS1019L – Unique 2-steel rail sliding system design offers single slide-glide operation, reducing saw’s footprint and allowing operation flush against a wall
- LS1019L – Less weight (57.9 lbs.) and the most compact design in its class for easy job site portability
- LS1019L – Powerful 15.0 Amp direct drive motor requires less maintenance and delivers 3,200 RPM
- LS1019L – Increased capacity for up to 6-5/8 in. crown molding (vertically nested), 5-1/4 in. baseboard (vertical) and 12 in. crosscuts at 90
- LS1019L – Large-sized aluminum base improves stability of material for efficient cutting
- LS1019L – Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- LS1019L – Miters 0-60 left and right, bevels 0-48 left and right
- LS1019L – Positive miter stops at: 0, 15, 22.5, 31.6, 45 and 60 left or right
- LS1019L – Electronic speed control maintains constant speed under load for smoother, higher quality cutting
- LS1019L – Integrated upper and lower 4-3/4 in. tall fence system offers added rigidity for more precise miter and bevel cuts
- LS1019L – In-front bevel lock for convenient operation
- AF506 – Powerful motor drives a range of 18 gauge brad nails from 5/8 in. to 2 in. into hard or soft wood applications
- AF506 – Aluminum body, magazine and cylinder for strength and durability, weighs only 2.9 lbs.
- AF506 – Narrow nose design allows easy nailing access in confined areas
- AF506 – Built-in air duster provides convenient air flow to clear work surface
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 72.765 lbs |
|---|---|
| Dimensions | 22.05 × 32.68 × 21.65 in |
| Amperage (amps) | 15 A |
| Dust collection type | Bag |
| Power Tool Features | Electric Brake, Keyed Blade Change, Laser Guide, Positive Stops |
| Power Source | Electric |
| Model | LS1019L-AF506 |
| Miter Saw Type | Sliding Compound |
| Maximum Degree Miter Cuts - Right | 60 |
| Maximum Degree Miter Cuts - Left | 60 |
| Maximum Cutting Thickness (in.) | 12 |
| Included Accessories | Laser Guide |
| Cuts Through | Wood |
| Arbor Size | 5/8 in |
| Cordless/ Corded | Corded |
| Corded Tool Type | Miter Saw |
| Cord Length (ft.) | 8.2 |
| Construction Material | Alloy |
| Condition | New |
| Color Family | Teal |
| Blade Diameter (in.) | 10 |
| Bevel Type | Dual |
| Tools Product Type | Power Tool |
Reviews (73)
73 reviews for Makita 15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser with Bonus Pneumatic 2 in. 18-Gauge Brad Nailer
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6955-20
Saws
Model# DW311K
Saws
Model# DW331K
Saws
Model# JR3070CT
Saws
Model# 6370-20
Roxane Davis (verified owner) –
Great saw. Unlike some of the reviews I read the saw was ready to go out of the box (it cut square and plumb). It took a little getting use to but I’ve been using it for about a month now and I love it.
Maximillian Feeney (verified owner) –
This is my second Makita slider, the first was an older LS1016. Both have solid build with plenty of power. This saw, the LS1019, can be used against a wall, has very much improved dust collection and front mounted tilt controls; all these are great enhancements. Fine tuning is easy.
Maynard Johnston (verified owner) –
My last Makita compound saw lasted almost 25 years before developing a slight deviation in cutting. This saw is also made VERY well and performed VERY well on my recent custom project. Easy to use and the degrees of use in both directions saved me a lot of time.
Dawn Wilderman (verified owner) –
Saw overall is decent.
Edwina Haley (verified owner) –
After extensive research reading reviews and watching videos on miter saws, I came down to choosing between this Makita (Model # LS1019L), the DeWalt DW717, 10″ double-bevel sliding compound miter saw, and the Bosch Glide Miter GCM12SD. I chose the Makita. Primary reasons: it has the same or better cutting capacity of 12″ saws, the soft start feature, the bevel unlock/lock knob is right in front and easy to use, the off-set slide bars result in reduced space taken up behind the saw, the dual dust collection ports, and the fact that a 10″ blade costs less than a 12″ (over time it adds up). Shipping was fast. Packaging left a lot to be desired as the box had several tears and the saw and loose components were basically separated by pieces of cardboard. Several loose pieces had obviously bounced around and the rubberized guard around the blade had come off. With that said however, I was surprised and happy to see there was no damage to the saw. The setup was easy, the alignments were correct right out of the box, the table was level, and everything worked consistently over many trial cuts. My dislikes are few……when talking to Makita about adapters for the dust vacuum ports, they aren’t much help. Makita does not make an adapter and simply suggests going to HomeDepot and buying plastic plumbing parts. I have several vacuum ports on equipment in my shop and a central system so I have pieces and parts. I purchased the POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers on Amazon and was able to connect my vac system.I did not like any of the Makita rolling miter saw stands so I mounted the saw on the Delta Power Equipment Corporation 36-267 Foldable Miter Saw Stand (see picture). It is similar to the Bosch Gravity rise rolling stand, but costs less. It works great with this saw. The only “adapting” you need to do is shorten the attachment bolts in front as their length will interfere with turning the table. It was easy to simply cut them off, which I did with a hand grinder fitted with a cut off blade once the bolts were in place (see pictures). I’ve had the saw a few weeks now and I’m very happy with this purchase so far. It has met and/or exceeded my expectations.
Luella Gleason (verified owner) –
The saw was great quality and easy to use. Also getting the job done
Lessie Wyman (verified owner) –
Don’t let the negative reviews fool you. Check for shipping damage before you accept it. Had mine shipped to the store, it was damage free. The saw is great. Zero start-up jump. Positive angle stops. Very smooth operation. Even the included blade was high quality.
Doris Daugherty (verified owner) –
Space saver heaven! Having the Slade action where it is saves my workshop trailer 13” from rear of sliding action. My old alder needed 13” more room in the rear! This is a must have for anyone that has limited room or wants to maximize their area. Also have all the levers in front is a dream come true! Older models you have to do a “reach around” to adjust your bevel! No more! Must have miter saw
Myrl Walsh (verified owner) –
I love this machine! I recommended this saw four people who work with wood. You not going to be disappointed with this product ⭐️⭐️⭐️⭐️⭐️
Claire Tremblay (verified owner) –
This miter saw is so so smooth, the slide is so easy and solid at the same time. I love the soft start, let’s you feel like you ‘re in complete control . Precise right out of the box and the blade is tops.
Annabell Vandervort (verified owner) –
Great saw. Delivers what it promises. Feature set outdoes all other saws
Asha Rogahn (verified owner) –
I am really enjoying using my new saw!
Reece Lubowitz (verified owner) –
Out of the box the saw did not cut straight or square. I adjusted the rails to get the blade to run true/straight and then adjusted the miter scale to square it up to the fence. Cuts straight and square now. Does Makita have room for improvement (e.g. accessories)? Absolutely. They’re headed in the right direction though.
Taurean Johnson (verified owner) –
Setup out of box was excellent. Only the laser needed adjustment. The two wheels on the miter stand are a joke at best. Already flipped over and scratched up my new saw while trying to wheel it.
Pearline Bartell (verified owner) –
This is a wonderful tool.Beautiful, well made and very precise in the cutting department.I was amazed at how quiet it is.A great value for an exquisite saw.
Anne Schamberger (verified owner) –
this purchase was a gift, the recipient was very pleased
Milo Stracke (verified owner) –
Flawless setup and function–great blade with very clean cuts; laser line cutting accurate and a great addition to this line.
Floyd Grant (verified owner) –
Perfect out of the box. I made several cuts and they are precised. I’m so happy.
Kory Kertzmann (verified owner) –
Good piece. Very accurate right out of the box. Has very serious dust collection issues. If its not hooked up to a vacuum you have a mess
Savanah Miller (verified owner) –
Saw is wonderful !Home Depot tracking and delivery leaves much to be improved upon. The poorest service received in years!