Makita 15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser with bonus Pneumatic 16-Gauge, 2-1/2 in. Finish Nailer
$740.32
Ensure increased vertical cutting capacity by choosing Makita Dual Bevel Sliding Compound Miter Saw with Laser with bonus Pneumatic 16-Gauge, Finish Nailer.
In stock
Description
The Makita 10 in. Dual Bevel Sliding Compound Miter Saw with Laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you will get all the cutting performance you need in a slide compound saw, but with the most compact size in the category for increased portability. With up to 6-5/8 in. capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4 in. baseboard, capacity, it can cut 4 x 4 dimensional lumber in 1-pass. It’s ideal for fine woodworking, carpentry, general construction, and more. The LS1019L is powered by a 15 Amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high. This Promotion also comes with a bonus AF601 16 Gauge, 2-1/2″ Straight Finish Nailer.
- LS1019L – 10 in. slide miter saw with the crown molding cutting capacity (6-5/8 in. nested) of a 12 in. miter saw
- LS1019L – Linear ball bearing system engineered to deliver dead-on accurate cuts
- LS1019L – Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4 in.)
- LS1019L – Unique 2-steel rail sliding system design offers single slide-glide operation, reducing saw’s footprint and allowing operation flush against a wall
- LS1019L – Less weight (57.9 lbs.) and the most compact design in its class for easy job site portability
- LS1019L – Powerful 15.0 Amp direct drive motor requires less maintenance and delivers 3,200 RPM
- LS1019L – Increased capacity for up to 6-5/8 in. crown molding (vertically nested), 5-1/4 in. baseboard (vertical), and 12 in. crosscuts at 90
- LS1019L – Large-sized aluminum base improves stability of material for efficient cutting
- LS1019L – Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- LS1019L – Miters 0-60 left and right, bevels 0-48 left and right
- LS1019L – Positive miter stops at: 0, 15, 22.5, 31.6, 45, and 60 left or right
- LS1019L – Electronic speed control maintains constant speed under load for smoother, higher quality cutting
- LS1019L – Integrated upper and lower 4-3/4 in. tall fence system offers added rigidity for more precise miter and bevel cuts
- LS1019L – In-front bevel lock for convenient operation
- AF601 – Efficient motor design offers leading power performance
- AF601 – Nail lock-out mechanism protects tool and work surface from dry-fires
- AF601 – “Tool-less” depth adjustment for more precise flush and countersink nailing
- AF601 – Built-in air duster provides convenient air flow to clear work surface
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 72.765 lbs |
|---|---|
| Dimensions | 22.05 × 32.68 × 21.65 in |
| Amperage (amps) | 15 A |
| Dust collection type | Bag |
| Power Tool Features | Electric Brake, Keyed Blade Change, Laser Guide, Positive Stops |
| Power Source | Electric |
| Model | LS1019L-AF601 |
| Miter Saw Type | Sliding Compound |
| Maximum Degree Miter Cuts - Right | 60 |
| Maximum Degree Miter Cuts - Left | 60 |
| Maximum Cutting Thickness (in.) | 12 |
| Included Accessories | Laser Guide |
| Cuts Through | Wood |
| Arbor Size | 5/8 in |
| Cordless/ Corded | Corded |
| Corded Tool Type | Miter Saw |
| Cord Length (ft.) | 8.2 |
| Construction Material | Alloy |
| Condition | New |
| Color Family | Teal |
| Blade Diameter (in.) | 10 |
| Bevel Type | Dual |
| Tools Product Type | Power Tool |
Reviews (81)
81 reviews for Makita 15 Amp 10 in. Dual Bevel Sliding Compound Miter Saw with Laser with bonus Pneumatic 16-Gauge, 2-1/2 in. Finish Nailer
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW331K
Saws
Model# 1590EVSK
Saws
Model# 6480-20
Saws
Model# D28715
Ciara Jacobson (verified owner) –
Don’t let the negative reviews fool you. Check for shipping damage before you accept it. Had mine shipped to the store, it was damage free. The saw is great. Zero start-up jump. Positive angle stops. Very smooth operation. Even the included blade was high quality.
Jacquelyn Zieme (verified owner) –
This saw makes clean and precise cuts. I have it set up on the WST06 Compact Folding Miter Saw Stand which makes it much more convenient to use for bigger jobs. I am fully satisfied having spent a little bit more money on a quality product that I am sure will continue to perform for a long time.
Blaise Leuschke (verified owner) –
Awesome saw! Absolutely love it!Easy to set up! Nice dust collection!After fighting the festool safety mechanism for years…it brings a smile to my face every time I use it!
Allison Jacobson (verified owner) –
The saw was great quality and easy to use. Also getting the job done
Pietro O’Conner (verified owner) –
Pro’s – – Zero clearance -Soft start motor & quite -Smooth Slide -Good bladeCon’s – -Slide rails not aligned with motor, which are factory set and not meant to be adjusted. – Cuts with slide will not be perfectly straight / flat – Excepted better precision from MAKITA for price
Hulda Daugherty (verified owner) –
The saw needed no adjustments to the alignments out of the box. All miter and bevel angles were right on.
Murl Gibson (verified owner) –
Pick up of the saw was easy.
Abdullah Gottlieb (verified owner) –
I love this machine! I recommended this saw four people who work with wood. You not going to be disappointed with this product ⭐️⭐️⭐️⭐️⭐️
Marlon Schroeder (verified owner) –
The slow start motor is probably the best thing about the saw. No vibrations in the blade for a precise cut.
Mabelle Mitchell (verified owner) –
Absolutely perfect right out of the box. I could not be happier. I highly recommend this saw. It is extremely well made. The blade is great.
Finn Goldner (verified owner) –
Makita is a long time brand that has proven its work man ship over hard years.Yes I enjoy my new 16 Guage Nail gun I highest level of quality I also just purchased a MAKITA 2505x-1 TABLE SAW. I am looking to enjoy more uses soon. I am a 100 percent Makita owner in many of there work tool
Randal Osinski (verified owner) –
I replaced an older Bosch and this saw cuts like butter. Blade is extremely good. Motor is quiet and the dust collection is very good
Johanna Prosacco (verified owner) –
Perfect out of the box. I made several cuts and they are precised. I’m so happy.
Ryleigh Schaefer (verified owner) –
Very pleased so far, had high expectations for the laser…it does ok, I’d give it a C+ at best. Overall, a solid unit. Cuts well, easy operations, everything seems to be placed well as far as knobs and levers.
Alene Padberg (verified owner) –
First off, there is no perfect miter saw on the market yet. I think the Kapex and this Makita are the closest to perfection for my needs. Each saw has their strengths and weaknesses, and I prefer the Makita overall. Main reason I went with this Makita is durability and price. The Festool forums are full of stories about Kapex motor failure. $1500 for a saw and possibly $500 more if the motor goes kaput, no thanks. I’d rather just pay $500 for the Makita saw and if it breaks outside of the warranty I’ll buy another and still only be into it for $1k. Festool makes genuinely great tools, but they are not as robust as I like for that kind of money. Warranty is good but w/e.Dust collection is on par with Kapex, provided you have the CFM’s and a genuine extractor, not a shop vac. Heard some stories about the rails being off plane for some folks but mine was set up perfectly right out of the box. Doesn’t have the fine adjustment knob like a Kapex but with practice it’s possible to get pretty accurate by working the bevel tension knob. I like that it can miter 60 degrees either way, and it doesn’t need space in the rear to slide.
Milford Luettgen (verified owner) –
I got a Makita LS1011L in 1992 … still find it acceptable for most applications.I purchased the LS1019L for a variety of applications – once again, I am very impressed with the quality, ease of set up, and performance of Makita products
Larry Mills (verified owner) –
Very light, easy handling nailer. This nailer replaces a first gen all electric made by a competitor that has red tools. The very minor drawback of requiring air tool oil is worth the slight hassle. Don’t hesitate. Buy now and enjoy.
Kareem Haley (verified owner) –
Over all a very good tool. Disappointed that the dust port adaptor did not come with the saw. I had to order it directly from Makita ( they were very nice).
Haleigh Connelly (verified owner) –
Great saw. Delivers what it promises. Feature set outdoes all other saws
Cody Rice (verified owner) –
Cuts like butter, super powerful. Dust collection is sub par, but I’m not sure any miter saw has good dust collection without modification.