Makita 12 Amp 6-1/2 in. Plunge Circular Saw with 55 in. Guide Rail and Guide Rail Clamp (2-Pack)
$466.50
Plunge Circular Saw with Guide Rail and Case from Makita maintains constant speed under load for smooth handling and a splinter-free, mirror finish.
In stock
Description
The Makita 6-1/2 in. Plunge Cut Circular Saw and 55 in. Guide Rail work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12-Amp motor and a large cutting capacity with magnesium components for less weight (only 9.7 lbs.). Electronic speed control maintains constant speed under load for smooth handling and a splinter-free, mirror finish. The saw delivers accurate cutting as the position of the blade enters the material on the same cutting line, whether cutting straight or bevel. This bundle also comes with 2, 194368-5, 55 in. Guide Rails and 194385-5 Guide Rail Clamp, 2-pack.
- Includes circular saw, 6-1/2 in., 48-tooth, carbide-tipped saw blade, hex wrench, 55 in. guide rail and stackable tool case
- 12-Amp motor with variable speed control dial (2000-5200 RPM) for optimum performance in a variety of materials
- Large cutting capacity (2-3/16 in. at 90° and 1-9/16 in. at 45°)
- Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°
- Close to the wall cutting (11/16 in.) for expanded cutting applications
- 1-1/2 in. O.D. dust port directs debris away from you and connects to a vacuum system
- Built-in current limiter helps prevent motor burnout
- Soft start feature for smooth start-ups
- Smooth and convenient plunge release lever for your comfort
- Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts
- 194368-5 – 55 in. guide rail for use with Makita Plunge Saw models XPS01, XPS02 and SP6000J
- 194368-5 – Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- 194368-5 – Ideal for ripping sheet material
- 194368-5 – Alternate use with select routers and circular saws, must use with router guide rail adapter (194579-2) and saw guide rail adapter (196953-0)
- 194385-5 – Holds Guide Rails or material firmly in place
- 194385-5 – For use with Makita 118 in. Guide Rail (194367-7), 55 in. Guide Rail (194368-5), 39 in. Guide Rail (199140-0), as well as select competitor rails
- 194385-5 – Fully compatible with Festool, Bosch and DeWALT track saw rails
- 194385-5 – Quick and easy installation for added user convenience
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 9.7 lbs |
|---|---|
| Dimensions | 59.00 × 11.70 × 13.90 in |
| Amperage (amps) | 12 |
| Depth Adjustment | Yes |
| Saw Drive Type | Sidewinder |
| Power Tool Features | Case Included, Depth Adjustment, Keyed Blade Change, Spindle Lock |
| Model | SP6000J1 |
| Maximum Speed (rpm) | 5200 |
| Maximum Cut Depth @ 90 Deg. | 2.188 in |
| Maximum Cut Depth @ 45 Deg. | 1.563 in |
| Included Accessories | Case |
| Cuts Through | Wood |
| Bevel Capacity | 48 |
| Cordless/ Corded | Corded |
| Corded Tool Type | Circular Saw |
| Cord Length (ft.) | 7.9 |
| Construction Material | Plastic |
| Condition | New |
| Color Family | Teal |
| Blade Location | Right |
| Blade Diameter (in.) | 6-1/2 |
| Tools Product Type | Power Tool |
Reviews (69)
69 reviews for Makita 12 Amp 6-1/2 in. Plunge Circular Saw with 55 in. Guide Rail and Guide Rail Clamp (2-Pack)
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# 6955-20
Saws
Model# JR3070CT
Saws
Model# 6480-20
Saws
Milwaukee 15 Amp 7-1/4 in. Tilt-Lok Circular Saw with Hard Case
Model# 6390-21
Saws
Model# D28715
Alford Wisoky (verified owner) –
I use these tracks with both my track saw and my router. Fine precision and quality. Quick delivery too.
Anibal Eichmann (verified owner) –
A must if you’re using a Makita plunge saw (or any another brand that fits). This track takes all the guess work out of accounting for your cut width. Literally lay this track over exactly what you want to keep and make the cut. A few of the track saw makers have adhered to a common track design. The Makita tracks have a slot for the Makita track saw to “clip-in” so the saw doesn’t tip over during bevel cuts, and they’re cheaper than the Festool tracks. I’m very pleased with mine.
Miller Mueller (verified owner) –
Works extremely well with the Makita plunge saw.
Brendon Lowe (verified owner) –
Love it
Sherwood Parisian (verified owner) –
Everything I expected. Makita needs to come up with a bracket or hanger for them. I got a 39″ and a 55″.
Rosella Fay (verified owner) –
Looks good and works well. For the money the rail clamps should be included
Rosina Parisian (verified owner) –
Accurate and easy to use. Recommend
Arturo Wintheiser (verified owner) –
So far so good
Glen Mante (verified owner) –
The guide rail was slightly out of square on one end but the other end perfectly matched my other guide rail.
Tyree Homenick (verified owner) –
The Plunge Saw Guide does what it was made for. The Plunge Saw and Guide have become essential in my ever-growing collection of quality Makita Tools.
Angelica Hermann (verified owner) –
Clamps work great. My only complaint is that they were screwed down so tight from the factory that they have indentations on the pads. Not sure if that will impact performance but would rather have a flat surface.
Mack Zemlak (verified owner) –
Work well.
Ressie Kovacek (verified owner) –
Works s promised.
Dianna Larkin (verified owner) –
Very easy to use and accurate right out of the box
Arden Padberg (verified owner) –
Bought this with the 55 inch extruded guide. This thing yields effortless finish cuts and I’m totally happy with my purchase … one star withheld for the tiny and not all that useful user’s guide …
Jameson Nikolaus (verified owner) –
Lower price than Festool – same design, work with Festool and makita tracksaws.
Jalyn Hoeger (verified owner) –
I really like the saw
Belle Conroy (verified owner) –
The track seems warped. The track saw drags about 3/4 of the way down the track. I tried Lubricating the track it didn’t help much. But it seems cut straight.
Tanya Lemke (verified owner) –
I love this saw! Granted; it is my first “large” power tool purchase so I don’t have much to compare it to. But the combination of the track and the nice encasing makes this a dummy proof set up. As with any power tool with blades there are risks – the largest with a track saw still being jump back if you pinch the wood or hit a knot. So always stand to the side with firm pressure on both handles!I have this hooked up to my shop vac and it keeps saw dust at a minimum. Produces glassy smooth cuts and rips through multiple layers of ply at the same time. I love it. Only quibble I have (and it is a minor one) – I feel like the base depth setting for saw should have the distance for the track taken into account. So if I know my material is 20 mm, for example, I can actually dial in 20 mm and go. As it is you have to add in the heigh of the track to get it sorted out.
Armand Goodwin (verified owner) –
Guide rail was made by/for Makita plunge saw. It fit perfectly.