The Makita 18-Volt LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 3-Speed Impact Driver (model XDT14Z, tool only) is a best-in-class fastening solution for users who want more torque, longer run-time and precision fastening features. The XDT14Z delivers all of the above in a compact size with a superior power-to-weight ratio. The XDT14Z combines a full 1,550 in. lbs. of fastening torque with category-leading precision features. Quick-Shift Mode is an automatic electronic controller that downshifts and reduces rotation and impact speed prior to driving the screw into place. It is engineered to minimize screw thread stripping, screw breakage and damage to work. For faster tightening of self-drilling screws, use the Tightening Mode (T-mode) and avoid damage to the screw or work piece. These precision settings, combined with 3-speed power settings, give users more control for a wide range of fastening tasks from cabinet screws and deck screws to lag bolts and much more. It is only 4-5/8 in. long and ideal for work in tight spaces. For increased versatility, the tool can also be powered by Makita 18-Volt LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside. This bundle also comes with E-01351 and Impact XPS 2-3/8 in. Magnetic Insert Bit Holder and E-01600 Impact XPS 3 Piece Square 2 in. Socket Adapter Set.
- Quick-shift mode selector has an automatic electronic controller that downshifts and reduces rotation and impact speed prior to driving screw into place and is engineered to minimize screw thread stripping, screw breakage and damage to work
- Tightening mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or work piece
- 3-speed power selection switch (0-1,100/0-2,100/0-3,600 RPM and 0-1,100/0-2,600/0-3,800 IPM) provides precise fastening control for a wide range of applications
- BL brushless motor delivers 3,600 maximum RPM and 1,550 in. lbs. of maximum torque
- Efficient BL brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- BL brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Features extreme protection technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Electronically-controlled BL brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Compact and ergonomic design at only 4-5/8 in. long
- Weighs only 3.3 lbs. with battery (battery not included) for reduced operator fatigue
- All metal gear housing for increased job site durability
- Convenient 1-touch 1/4 in. hex chuck for quick bit changes
- E-01351 – Provides convenient pick-up and retention of fasteners
- E-01351 – Engineered to allow the torsion section of the bit holder to flex under load, taking pressure off of the bit tip for increased durability in high torque applications
- E-01351 – 2-piece design is engineered to allow the torsion technology to fully activate
- E-01600 – Ideal for use with high torque impact drivers and driver-drills
- E-01600 – Retention ball helps secure the socket
- E-01600 – Chamfered edges of square drive end allow easy installation socket
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Frances Hagenes (verified owner) –
Makita makes some very good tools. the nice thing about them is that they last and don’t break very easily.
Hazel Kozey (verified owner) –
My Impact driver is powered by older pre-LXT 18V Lithium batteries, BL1815, which work just fine for my home projects. Drives screws much better than a regular two speed drill. Drilled a few pilot holes in delicate materials using a 1/4 inch hex shank 1/8″ drill. I like this tool!
Jennings Nicolas (verified owner) –
This is my main tool at work. This is definitely an upgrade from the one that comes in the box set with the drill. It is quieter and seems to use less power. I would recommend it to any contractor.
Ashton Gerhold (verified owner) –
Very easy to assemble, very easy to connect other bits onto the adapters, as well as removing
Albertha O’Kon (verified owner) –
Great
Nestor Nicolas (verified owner) –
Works great, very pleased.
Casimer Heidenreich (verified owner) –
Excelente material
Xavier Lebsack (verified owner) –
Buenas las llaves , pistola de inpasto electrica
Demetris DuBuque (verified owner) –
Was excellent, good product
Maddison Crist (verified owner) –
Great quality and super low price.
Zoie Batz (verified owner) –
Excellent for the service and the items ThanksMarkos
Krystal Brown (verified owner) –
These bits seem good quality. I work in HVAC/R, electrical and plumbing and they are good like the other brands I’ve bought.
Madisen Parker (verified owner) –
The drill works great for taking skid plates off of trucks at work.
Ray Fay (verified owner) –
Great drill
Elisha Reilly (verified owner) –
Yeah. Super. Made my day. It’s a socket adapter. I hope this review about a mundane, widely available attachment usually included in socket wrench sets but sometimes lost, as was the case for me….has been helpful. Be sure to buy the extended warranty though. Right?
Twila Blanda (verified owner) –
Great Impact Driver. I would recommend to a friend.
Erick Tromp (verified owner) –
A must have for your tool bag.