The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-1/8 in. AVT Rotary Hammer is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency and convenient dust extraction. Its powered by2 18-Volt LXT batteries and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord. X2 LXT technology delivers up to 140 in. x 2-3/8 in. holes per charge when using two 18-Volt LXT 5.0 Ah batteries. The Rotary Hammer includes an OSHA Table 1 compliant on-board dust extractor attachment with filter-cleaning mechanism designed to maintain optimum suction efficiency. The trigger-activated dust extractor is powered by a separate motor which increases suction efficiency without sacrificing the performance of the rotary hammer. The rubber suction gasket is engineered to provide consistent contact with the work surface, where the dust is channeled to the clear dust container with HEPA filter which captures 99.97% of dust particles (size 0.3 microns). An added feature is a 3-second delay on the vacuum motor: After the trigger is released, the 3-second extended suction collects remnant dust and particles as the bit is being pulled out of the work surface, making it ideal for overhead drilling. The dust extractor attachment is removable and the rotary hammer can be used with separate attachments and dust extractors (sold separately).
- X2 LXT technology delivers up to 140-1/2 in. x 2-3/8 in. holes per charge using two 18-Volt LXT 5.0 Ah batteries
- Powerful BL brushless motor delivers 0 RPM to 980 RPM, 0 BPM to 5,000 BPM and 2.3 ft./lbs. of impact energy to handle the most demanding applications
- OSHA table 1 compliant on-board dust extractor includes a filter cleaning mechanism designed to help maintain optimum suction efficiency
- Anti-Vibration Technology (AVT) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
- Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Variable speed dial and trigger enables user to match the speed to the application
- Built-in LED light with an independent on/off illuminates the work area
- Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
- 3-mode operation for rotation only, hammering with rotation or hammering only for multiple applications
- Retractable tool hook secures the tool when not in use
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- 18-Volt LXT lithium-ion 5.0 Ah battery BL1850B, features an integrated LED battery charge level indicator
- 18-Volt LXT lithium-ion 5.0 Ah battery BL1850B reaches a full charge in 45-minutes or less
- Rapid optimum charger communicates with the battery’s built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Julian Grimes (verified owner) –
Makita one of the best quality tools out there
Melba Gulgowski (verified owner) –
Great product. Great customer service.
Madeline Kautzer (verified owner) –
This batter was bought to replace the original battery that quit after two charge phase. So far this one has taken one charge and is working OK. But the original battery went to Makita for replacement and I haven’t received the replacement yet. I would rate higher but so far I am seeing a 25% failure and that is not accecptable.
Elvis Fisher (verified owner) –
Does the job!
Daphne Harvey (verified owner) –
This is my husband’s favorite drill. I bought him the 5.0Ah battery and he loves the extended time, not having to stop to charge it is a game changer.
Victor Feil (verified owner) –
Good product.
Thelma Gottlieb (verified owner) –
Best battery made, period!
Geraldine Bergnaum (verified owner) –
Max power
Grant Dicki (verified owner) –
So Far So Good. Long time before recharging
Roosevelt Tremblay (verified owner) –
It is great
Arno Howe (verified owner) –
Works great with all my tools. Versatility and longevity of battery life is a “+” (pardon the pun!).
Trenton Marquardt (verified owner) –
Charged battery and cut a 2 1/2″ pipe perfectly!!
Bernardo Davis (verified owner) –
Great battery. Makita in general makes a great product.
Hellen Hackett (verified owner) –
Great
Shana Mante (verified owner) –
Love the power and reliability it provides
Margret Kshlerin (verified owner) –
Best choice for circular saw and grinder . Saves time doing battery changes.
Garett Zulauf (verified owner) –
It has so much power and last so long, of course it is new. But my son has Makita and they have worked good for him for a long time, that’s why I switched to Makita.
Willis Gerhold (verified owner) –
Great battery performance outstanding
Elliott Zboncak (verified owner) –
Couldn’t recommend the 5.0 Ah batteries more. Although they are heavier- suck it up, it builds muscle ;). I love that I can count on the quick charge time and how long each battery lasts. Depending what tool, I can go 2-4 hours on one battery using constantly. I now have three of them and watch for deals. I couldn’t be happier.
Lane Sauer (verified owner) –
Awesome tool and easy to operate and maneuver.