Makita 18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only)
$179.00
This Makita LXT Lithium-Ion 23-Gauge Cordless Pin Nailer is a hose-free solution for installing casings, decorative trim, molding and baseboards.
In stock
Description
The Makita 18-Volt LXT Lithium-Ion Cordless Pin Nailer, 23-Gauge (model XTP02Z, tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful and drives 5 different pin nail lengths (5/8 in., 11/16 in., 1 in., 1-3/16 in. and 1-3/8 in.) with a magazine capacity of up to 120 nails. Using the 18-Volt LXT 4.0Ah battery, the XTP02Z will drive up to 4,250 nails on a single charge. Its part of Makita expanding 18-Volt Lithium-Ion series, the worlds largest cordless tool line-up powered by an 18-Volt Lithium-Ion slide-style battery. Makita 18-Volt Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18-Volt LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Refined firing mechanism reduces recoil, reduces force required on the work surface when driving pins
- Drives 6 different lengths, 5/8 in., 11/16 in., 3/4 in., 1 in., 1-3/16 in. and 1-3/8 in., of 23-Gauge pin nails (tool does not work with 1-1/4 in. pin nails)
- Magazine capacity up to 120 pin nails
- Tool-less depth adjustment for precise flush and countersink finish
- Cordless for increased convenience, eliminates the need for a compressor and air hose
- Contact trigger for improved accuracy and precision
- Built-in LED light illuminates the work area
- Ergonomically designed handle with rubberized soft grip provides increased comfort
- Rubber bumpers protect the tool and surface from damage
- Reversible tool hook allows the tool to remain close
- Narrow nose design allows easy nailing access in confined areas
- Compact and ergonomic design at only 10-1/8 in. L
- Weighs only 4.9 lbs. with battery (battery not included) for reduced operator fatigue
- Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating
- Compatible with Makita 18-Volt lithium-ion batteries with a star symbol (battery sold separately)
- Battery and charger sold separately
- 3-year limited warranty
- Only use genuine Makita batteries and chargers
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 4.7 lbs |
|---|---|
| Dimensions | 3.50 × 11.60 × 9.50 in |
| Air Tool Type | Air Nailer |
| Model | XTP02Z |
| Reconditioned | No |
| Power Type | Cordless Electric |
| Number of Total Batteries Included | 0 |
| Nailgun Angle | 0 |
| Nail Gauge | 23 |
| Motor Type | Brushed |
| Minimum Fastener Size | 5/8 in |
| Battery Amp Hours | No Battery |
| Maximum Fastener Size | 1-3/8 in |
| Included | No additional components or accessories are included |
| Cordless/ Corded | Cordless |
| Condition | New |
| Charger Included | Charger Not Included |
| Battery/Charger | Tool Only |
| Tools Product Type | Air Tool |
Reviews (46)
46 reviews for Makita 18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only)
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# D51257K
Nail Guns
Milwaukee M12 12-Volt Lithium-Ion Cordless Palm Nailer (Tool-Only)
Model# 2458-20
Nail Guns
Model# PFN64
Nail Guns
Freeman Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case
Model# PFL618BR
Nail Guns
Freeman Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Pieces)
Model# P4FRFNCB
Nail Guns
Model# 4G0001N
Nail Guns
Model# 6E0001N
Nail Guns
Model# 2458-21
Maxine Daugherty (verified owner) –
i like it
Kellen Hane (verified owner) –
Great product overall !
Destinee Kutch (verified owner) –
Compact, light and easy to operate
Gregoria Hettinger (verified owner) –
After reading all the previous reviews regarding jams, I was a bit hesitant but am a big makita fan so I thought; worse case I will return. Mine worked like a charm. Switching sizes is easy. Battery life is super long. I practiced on a few boards to get the feel and after that, no worries!
Jessica O’Conner (verified owner) –
The pin nailer is good , but the nails get stuck multiple times
Kennedy Lowe (verified owner) –
Great cordless pin nailer!
Eloise Johnson (verified owner) –
I purchased this unit two months ago as my first ever cordless nailer. I Install cabinets and custom trim for a living and I have shot literally thousands or pins from 5/8″ on up in a wide variety of hardwoods and this unit has NEVER misfired. It has left a few pins proud here and there, but the same can be said for my pneumatic Hitachi. This is my only makita tool I own, and I am glad I have it. I would not hesitate to purchase another if I ever needed to.
Claud Ziemann (verified owner) –
The only problem is it constantly misfires unless I only use half a strip of nails at a time which is very inconvenient
Marion Larkin (verified owner) –
Excellent up to 1″ in most hardwoods. My depth adjuster was tough to adjust.
Raphael Murphy (verified owner) –
It is my 4th gun they firing pin get stuck a lot until it won’t go bsck
Haylee Larkin (verified owner) –
Been using this for about a year off and on. Not every project needs pins. Not sure why others are having issues with this tool. Mine rocks! I keep waiting for it to misfire or not sink the pin. I build furniture and I’ve used it in maple, walnut, canarywood, birch and plywood all with perfect results. I fooled around with it trying to make it misfire and if you don’t keep a tight grip on it, it will bounce up and not sink the pin, but this is true of all nailers I know of. I love this thing. So easy.
Lester Lockman (verified owner) –
Very hard to find Brad nails for it. Most I’ve found are headless. That’s the only issue.
Gaetano Will (verified owner) –
I am a cabinet installer by trade and it’s the only occupation I have had starting at 16 years old and Now have 15 + years experience. With that being said I love this tool! Works great for Paneling moldings toe kicks and more I use 3/4 and 1 inch pins with no problem it rocks
Chloe Schulist (verified owner) –
It is the only pin nailer that is cordless, that proforms like a air nailer quick in shooting 1 1/8 in hard wood. I like it because it’s easy to used. The down side on this tool is the led light, it does not lid up the work area enough.
Domenick Powlowski (verified owner) –
Very convenient.
Nico Koch (verified owner) –
I like it for it is handy from time to time and doesn’t split thin wood in my trim work. I was worried at first, because the pins jammed a few times out of the box. But I think taking the time to seat the nails tightly to the bottom of the track and to the magnetic driving chamber keeps the pins from jamming. So, thanks for making such a handy tool available!
Durward Dach (verified owner) –
Small easy to handle, drives pin nails easily.
Alexane Schuster (verified owner) –
Doesn’t set the pins as well as expected
Nick Mertz (verified owner) –
Despite the 3.2 average review, I went ahead and bought this baby based on some of the 5 star reviews being detailed where as low rated reviews did not provide much detail as to why the rating was low.This is actually a great product, however it does not work well with certain materials. If Makita was upfront about what materials can be used with this pin nailer, then it would save everyone the headache and provide a better customer experience.This pin nailer WORKS GREAT for wood trim, cabinet trim, and even blasts through doug fir studs. However it SUCKS for MDF trim, especially prefinished MDF. Even on the max setting I can’t drive a 1″ 23 gauge pin nail into a 1/2″ board without a 1/4″ sticking out above the surface.Its a great product for wood, but not MDF. That said, if you’re working with wood its awesome, for MDF avoid.
Brennan Fadel (verified owner) –
Excellent performance. Very easy to use. We remodeled a kitchen and two bathrooms with this…fantastic performance and simple to switch batteries between this and my other 18v Makita tools!