Makita 18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only)
$179.00
This Makita LXT Lithium-Ion 23-Gauge Cordless Pin Nailer is a hose-free solution for installing casings, decorative trim, molding and baseboards.
In stock
Description
The Makita 18-Volt LXT Lithium-Ion Cordless Pin Nailer, 23-Gauge (model XTP02Z, tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful and drives 5 different pin nail lengths (5/8 in., 11/16 in., 1 in., 1-3/16 in. and 1-3/8 in.) with a magazine capacity of up to 120 nails. Using the 18-Volt LXT 4.0Ah battery, the XTP02Z will drive up to 4,250 nails on a single charge. Its part of Makita expanding 18-Volt Lithium-Ion series, the worlds largest cordless tool line-up powered by an 18-Volt Lithium-Ion slide-style battery. Makita 18-Volt Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18-Volt LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
- Refined firing mechanism reduces recoil, reduces force required on the work surface when driving pins
- Drives 6 different lengths, 5/8 in., 11/16 in., 3/4 in., 1 in., 1-3/16 in. and 1-3/8 in., of 23-Gauge pin nails (tool does not work with 1-1/4 in. pin nails)
- Magazine capacity up to 120 pin nails
- Tool-less depth adjustment for precise flush and countersink finish
- Cordless for increased convenience, eliminates the need for a compressor and air hose
- Contact trigger for improved accuracy and precision
- Built-in LED light illuminates the work area
- Ergonomically designed handle with rubberized soft grip provides increased comfort
- Rubber bumpers protect the tool and surface from damage
- Reversible tool hook allows the tool to remain close
- Narrow nose design allows easy nailing access in confined areas
- Compact and ergonomic design at only 10-1/8 in. L
- Weighs only 4.9 lbs. with battery (battery not included) for reduced operator fatigue
- Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating
- Compatible with Makita 18-Volt lithium-ion batteries with a star symbol (battery sold separately)
- Battery and charger sold separately
- 3-year limited warranty
- Only use genuine Makita batteries and chargers
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 4.7 lbs |
|---|---|
| Dimensions | 3.50 × 11.60 × 9.50 in |
| Air Tool Type | Air Nailer |
| Model | XTP02Z |
| Reconditioned | No |
| Power Type | Cordless Electric |
| Number of Total Batteries Included | 0 |
| Nailgun Angle | 0 |
| Nail Gauge | 23 |
| Motor Type | Brushed |
| Minimum Fastener Size | 5/8 in |
| Battery Amp Hours | No Battery |
| Maximum Fastener Size | 1-3/8 in |
| Included | No additional components or accessories are included |
| Cordless/ Corded | Cordless |
| Condition | New |
| Charger Included | Charger Not Included |
| Battery/Charger | Tool Only |
| Tools Product Type | Air Tool |
Reviews (46)
46 reviews for Makita 18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only)
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Freeman Pneumatic 3-in-1 15.5-Gauge Flooring Stapler and 16-Gauge 2 in. Flooring Nailer with Case
Model# PFL618BR
Nail Guns
Model# BN200C
Nail Guns
Model# PP123
Nail Guns
Porter-Cable 3-1/2 in. 30 Degree to 34 Degree Clipped-Head Framing Nailer
Model# FC350B
Nail Guns
Model# 430101N
Nail Guns
Model# HDXFN64
Nail Guns
Freeman Pneumatic 21-Degree 3-1/2 in. Full Round Head Framing Nailer with Case
Model# PFR2190
Nail Guns
Model# DPFN64
Amina Klocko (verified owner) –
Shoots just fine. The trick is NOT to use 1 1/4” brads!
Madelyn Stanton (verified owner) –
I’m a union finish Carpenter and I’ve been in the union for 26 years and just bought 2 of the Cordless makita 23g pin guns for A job in a high end hotel in Boston they wanted to add a piece of wood in behind some vanity draw pulls for support it was a oak to oak application In every room so it was about 250 rooms 2 draws per room this gun worked perfectly never jammed never miss fired this gun worked like a charm and it beat dragging my compressor and hose to every floor and room Don’t listen to any of the bad reviews there is a lot of guys out there who think there a finish carpenter But in reality there a sub par handyman I only use Makita Now and have tried every tool on the planet they last and are reliable! Thanks Jason
Lurline Wisoky (verified owner) –
Product works just as described. Great feel, light and durable.
Dante Howe (verified owner) –
Great tool, easy to load and use.
Blair Price (verified owner) –
My husband has been using Makita pin nailer for 3 days now and is quite happy with it. It is certainly easy to use and has performed well.
Josianne Hand (verified owner) –
allgood
Jerrod Bradtke (verified owner) –
Not setting the porter cable 23 gage 1 3/8″ nails recommended. ??
Donato Gislason (verified owner) –
Third shot jammed. Not a good start. I installed about 140 feet of quarter round with this new gun, and had to clear probably a dozen jams along the way. That and finding little bits of pin nail in the head. I dont mind clearing jams but the head is held on by 3 allen screws. So doing that 12 times get annoying. I had such high hopes for this 2nd gen pin nailer, but there is some serious reliability issues that need to be addressed. Back to the pneumatic Hitachi.
Glenda Huel (verified owner) –
Excellent performance. Very easy to use. We remodeled a kitchen and two bathrooms with this…fantastic performance and simple to switch batteries between this and my other 18v Makita tools!
Warren Upton (verified owner) –
Makita 18v 23 gauge nailer works perfect everytime ..A drop of WD-40 on fresh Porter-Cable 23 gauge pins.. This Makita sinks nails flush.Have not had one jam 1000’s of pins later still works perfectly well worth investment
Dorris Johns (verified owner) –
Fits into corners or inside cabinets where it is difficult to get a pneumatic nailer. I am using it to drive short pin nails into oak cabinetry and it works fine. With long pin nails, it attaches oak trim and oak baseboard to walls with ease. If you are set up for Makita cordless tools, it is definitely worth the money.
Rhiannon Veum (verified owner) –
First battery powered nail gun… not all that impressed. Jams routinely…this is second item as first was repaired.
Jordane Strosin (verified owner) –
Enjoy every time I have a need for this tool
Delaney Sipes (verified owner) –
Was extremely surprised based on the negative reviews. No misfires at all! Exactly what I was looking for!
Percy Walter (verified owner) –
This is the 2nd generation pin nailer. The 1st gen had some issues with power. This one is a lot better. Some people are saying it won’t drive the pin in all the way in hard woods. I had a few issues until I used another brand of pins and my problem was gone. Make sure to buy good quality pins to use. There is a depth adjustment so you can set the pins deeper if needed.
Nedra Boyer (verified owner) –
A recent purchaser of this tool. It has worked out very well for me. I’ve used it on 3/4″ maple and maple mouldings. Only a few shots were left proud most likely to not keeping the gun tight to the work surface. I have used several different size nails. No jambs or problems to deal with. I would recommend this product for finer finish work.
Sydney Bashirian (verified owner) –
I just purchased this gun to replace a pneumonia nailer and couldn’t be happier. Spent the day building cabinets and the gun worked perfectly. Easy to handle. Drove pins as desired. After shooting closes to 200 brads into plywood and hardwood faces the battery was still fully charged. Extremely pleased.
Marty Mraz (verified owner) –
Just purchased and have only used a couple of times, but works great, so far. Fingers crossed that it holds up.
Lera Hahn (verified owner) –
the slide for loading the pins is to flimsy. the pin nailer works well. the pin hole is vary small.
Tyrique Goodwin (verified owner) –
Awesome tool. As soon as 2nd generation models of the Brad nailer and crown stapler becomes available I will purchase immediately based on my experience with this pin nailer. I’ve had no problems with oak or hickory using this gun. Very pleased.