Milescraft DrillBlock Hand-Held Drill Guide
$18.97
The Milescraft 1312 Drill Block includes eight rubber feet to prevent slipping and marring on any surface. It provides long lasting durability and added protection. It is convenient to use and maintain.
In stock
Description
The Milescraft DrillBlock drill guide jig, allows you to drill straight holes all of the time. With the inserted metal drill guide there is no room for error. The drill block allows for drilling on many surfaces. Equipped with centerlines, accuracy alignment helps guarantee precision.
- Inserted metal drill guide offers six common drill diameters: 1/8”, 3/16”, 1/4”, 5/16”, 3/8” and 1/2”
- V-groove allows drilling on corners or round surfaces
- Accurate alignment when drilling with built in centerlines
- Drill block drilling jig includes 8 rubber feet that prevent slipping and marring on any surface
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | .28 lbs |
|---|---|
| Dimensions | 1.75 × 11.75 × 8.25 in |
| Color Family | Black |
| Ideally Used With | Power Drills |
| Material | Plastic |
| Model | 1312 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 2.7 in |
| Tools Product Type | Power Tool |
Reviews (73)
73 reviews for Milescraft DrillBlock Hand-Held Drill Guide
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
Model# 196953-0
Saw Tracks
Model# 71173
Saw Tracks
Model# TTSAG
Saw Tracks
Model# 71128
Saw Tracks
Olson Saw 3/16 in. x 3/4 in. Band Saw Guide Blocks for Most 56-1/8 in. Band Saws (4-Pack)
Model# CB50080BL
Saw Tracks
Model# 71174
Saw Tracks
Model# CB50085BL
Saw Tracks
Triton 2 in. x 27.5 in. Track Pack with Connectors for Track Saw
Model# TTSTP
Berniece Rippin (verified owner) –
One of the rubber pads is not all the way into the molded plastic block. This prevents the block from drilling 90 degress from the surface. Fixed this by shaving the rubber. Would rate higher if it had been in good working condition from the start.
Rodolfo Wisoky (verified owner) –
Easy to use to drill holes straight.
Edward O’Hara (verified owner) –
Simple to use. Performed exactly as expected. No handyman or home repairman should be without it.
Asa Reinger (verified owner) –
A bit difficult to clamp in a few uses, but most of the time this is a great shortcut for straight
Rahul Gottlieb (verified owner) –
Excellent tool. Accurate and easy to use. Easily stores on the pegboard. Very good value.
Cedrick Powlowski (verified owner) –
Well, definitely not as cheap as I thought it would be — good build quality actually. I like the little red grips for holding it in place too.
Elisa Runolfsdottir (verified owner) –
Handy and inexpensive
Norris Wilkinson (verified owner) –
It’s easy to use and makes life easy when drilling hole threw doors for hardware.
Stuart Abshire (verified owner) –
It’s a great hand-held guide when it’s not possible or efficient timewise to break down the work pieces and have them drilled on the drill press. The v-groove on the bottom can also be used as clamping jig for round pieces and pipes. My only gripe is the bushings don’t go down to smaller sizes but it’s not a deal breaker.
Aubree Fadel (verified owner) –
This is an excellent product. I have used it on many occasions to guide my drilling motor when drilling holes that I want to be perpendicular to the work piece.
Jayce Ferry (verified owner) –
Works as advertised
Elva Rowe (verified owner) –
Just the thing for quick and easy perpendicular drilled holes.
Jasper Robel (verified owner) –
It’s simple, easy to use and pretty reliable at guiding straight holes when you don’t have, or can’t use, a drill press.
Elmore Hansen (verified owner) –
Worked as advertised
Vicenta Raynor (verified owner) –
Easy to use.
Delaney Yost (verified owner) –
Good aid
Theodore Heaney (verified owner) –
it works
Mathew Collier (verified owner) –
Very good tool
Jaylen Wilkinson (verified owner) –
I like to use this when I don’t want to go to the drill press for a single or just a couple holes.
Melany Mante (verified owner) –
The DrillBlock by Milescraft helps insure that standard sized holes are drilled at a perfect 90 degrees to the surface you are drilling. The block is small enough to put in your tool belt – being 4 1/2″ long by 1 1/2″ wide and 1 1/8″ thick. It has 6 common-sized holes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″. There are 4 little feet that prevents slipping and marring. There’s a built-in center line system for accurate alignment. The bottom side has a 90 degree V-Groove which allows drilling accurate holes on corners or round surfaces. It’s lightweight but durable.