Milescraft DrillPump750 Water Transfer Drill Pump 750 GPH
$13.70
This water drill pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4 in. and uses any standard garden hose. The unit pumps up to 750 Gal. per hour and is self-priming up to 12 ft.
In stock
Description
This water drill pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4 in. and uses any standard garden hose. The unit pumps up to 750 Gal. per hour and is self-priming up to 12 ft.
- Ideal for transferring water from one source to another
- Self-priming up to 12 feet
- 3/8” shank fits all common chucks
- Unit pumps up to 750 Gal. per hour
- It is recommended to use a common silicone; to apply, unscrew the side and put a bit of grease on the housing where the rubber fan blades touch, then reassemble
- Designed to work with most electrical drills with a maximum speed of 2,800 RPM
- Do not get the drill wet or use the drill pump with flammable liquids
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Dimensions | 4.25 × 11.75 × 8.25 in |
|---|---|
| Color Family | Red |
| Drill Attachment Product Type | Drill Pump |
| Material | Plastic |
| Model | 1314 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 5.5 in |
| Tools Product Type | Power Tool |
Reviews (72)
72 reviews for Milescraft DrillPump750 Water Transfer Drill Pump 750 GPH
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Attachments
Model# 5354
Drill Attachments
Model# 48-66-1370
Drill Attachments
Model# 272701
Drill Attachments
Model# MB-03027
Drill Attachments
Model# 2012703
Drill Attachments
Model# RHA-50
Drill Attachments
Jacobs Professional Grade 3/8 in. Keyless Drill Chuck with 3/8 in. 24-Mount
Model# 30354
Drill Attachments
Model# HA3JAW
Shaun Wolf (verified owner) –
Works great. Used it a couple of times to move some water out of my small waterfall basin.
Rosa Kemmer (verified owner) –
This drill pump does a very good job of pumping water. My main purpose though was to pump crank case oil from my inboard boat engine, I have not been able to use if for that purpose yet. The manufacture rep said it should work fine for that purpose.
Chance Gottlieb (verified owner) –
This type of pump can be used to flush automatic transmission fluid. Saves a lot of $$$ bypassing the dealer who in most cases only drains the pan which only removes about 1/4 of the fluid. You then get billed for 12 qts. of fluid when they only replaced 3. I’ve seen this happens too many times.You can flush out ALL of the old transmission fluid with one of these.
Adolph Conroy (verified owner) –
Does exactly what is is supposed to do and it does it well. I have used it about 6 times during a camping trip. I cannot comment on the durability or longevity of this item but it works great out of the box.
Nyah Lockman (verified owner) –
Easy to put on and take off and easy to use
Myrtice Gorczany (verified owner) –
Works like a charm (used one time) and self primes. Good flow (12 inch lift). But! instructions call for a 600 watt drill. No key chuck works better as my keyed chuck wouldn’t tighten enough to not slip. Turns tough (to self prime and not leak) but my Makita cordless drill worked fine.
Silas Breitenberg (verified owner) –
Works great !
Leta Stark (verified owner) –
The same review I gave last time ! ! It pumps the way a good pump should ! !
Zora Kilback (verified owner) –
There is no mark on the pump body as to the inlet or outlet and the rotation of the pump so proper connection can be made. How will I know?
Clair Fadel (verified owner) –
Works great not sure about the 750 gal per hour thought, But works great for draining 60 gal barrels of water into 15 ft of hose no priming, just lightweight oil every once in a while.
Ruben Schuster (verified owner) –
Worked perfect. Need a decent drill to turn it but works good. Keep greased up after each use and seems fine so far.
Emory Feil (verified owner) –
Good build quality
Elody Christiansen (verified owner) –
Works well after a little break-in period.
Samson Gutmann (verified owner) –
Works fine, spray a little white lithium grease into both openings before the first use to lubricate the impeller.
Jasen Gleason (verified owner) –
Works well, but hose threads are poorly made.
Brandyn Wunsch (verified owner) –
This is a great little pump. BUT buyer beware!. I purchased this pump to flush out a heater core core on a vehicle I own. Followed the brief instruction about priming the pump before initial use so I did so.When I got it all hooked up into a home made flushing system with clear vinyl tubing, I noticed a fairly large amount of off white particles along with some black rubber like residue pumping thru. Upon inspection, it appeared to be packed with lithium grease from the factory and was breaking loose from the pump and contaminating the system. I was not expecting this at all !! The pump was also very stiff to turn requiring a good electric drill to turn.
Eda Kunde (verified owner) –
I have had drill pumps before but this one really works very well. It is the best I have ever used…live it.
Celestine Hoppe (verified owner) –
It did the job. No problem. Extracted accumulated water from a sump to a drain.
Justina Dibbert (verified owner) –
Used to drain off pool cover. Worked fine,. However, I strongly recommend priming the pump.Pump was well worth the cost.
Natasha Huels (verified owner) –
It was perfect for my project.