Milescraft PocketJig200 Complete Pocket Hole Kit with Jig, Bit, Screws and Drivers
$29.40
Keep your crown molding in place without the assistance of another person by selecting this affordable Milescraft PocketJig Pocket Hole Kit with Jig Bit Screws and Drivers.
In stock
Description
The Milescraft PocketJig200 pocket hole jig allows you to connect your workpieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this kit does it all. Allowing you to create corner joints, T-Joints, Framing Joints, Miter Joints and do repairs. With built-in settings for board thicknesses, there is no need to manually measure. Just set this pocket jig to your desired setting, set the depth of your bit and start drilling.
- PocketJig200 Pocket Hole Jig Kit Designed To Make Repairs Simple
- Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop
- Built-in Imperial and Metric scales allow you to easily measure the thickness of your workpiece
- There are four common board thickness settings built into the pocket jig: 1/2 in., 3/4 in., 1 in. and 1-1/2 in. (12, 19, 27, 38mm)
- Easily adjust to your board thickness setting with the single sled design and sled adjust button
- Hardened steel drill bushings for precise and accurate pocket holes every time using the Milescraft PocketBit
- Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try
- Recessed clamp pocket with magnet helps to keep the clamp in the same position as you move to different locations
- With the stronger rare earth magnet, you can easily clamp the jig from one location to another
- For speed and accuracy, use with Milescraft FaceClamps
- 3/8 in. HSS Step drill bit made from high-speed steel the PocketBit with 1/4 in. hex shaft is designed to reduce clogging and provide smooth and precise holes
- 3/8 in. split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling. Hex key included for tightening
- With the quick change compatible connector, you can quickly change from drilling to driving and accepts all hex bits
- 3 in. and 6 in. magnetic T20 star drivers included for maximum torque settings without stripping
- Rugged storage case with designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2.05 lbs |
|---|---|
| Dimensions | 9.60 × 8.00 × 2.60 in |
| Individual/Set | Set |
| Jig type | Drill |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Maximum stock size (in.) | 1.5 |
| Minimum stock size (in.) | .5 |
| Model | 1325 |
| Number of Pieces | 77 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 9.6 in |
Reviews (5)
5 reviews for Milescraft PocketJig200 Complete Pocket Hole Kit with Jig, Bit, Screws and Drivers
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# A13L
Cutting Tools
Stanley 27.75 in. Adjustable Angle Clamping Miter Box with 22 in. Saw
Model# 20-800
Cutting Tools
Model# 2100-9
Cutting Tools
Model# 122100R
Cutting Tools
Model# 4212
Cutting Tools
Model# 849
Cutting Tools
Model# K4H
Cutting Tools
Model# 0190MC
Santino Bradtke (verified owner) –
Works very well.
Albertha Kshlerin (verified owner) –
Measurements on side do not line up, could be better
Kamille Douglas (verified owner) –
Good construction, snaps to settings. No setting for slightly thinner products as plywood at 5/8″ but seemed to work if set to 3/4″. Nice carrying case. Somewhat repetitive operation as you need to disassemble the collar from the drill to put it away. Drill for pocket made a very rough cut in pine 2×4 when drilled with the grain. nice assortment of screws in package. Instructions took a while to figure out as they are sparse and not very detailed. Well build, sturdy and seems it will last a while.
Danny Auer (verified owner) –
It’s good for the price and it functions perfectly fine. It doesn’t come with a square drive bit which a slightly more expensive jig would have so I had to buy one separately. This dipped into the money I thought I was saving.
Jacinto White (verified owner) –
This kit workes perfectly for me. The only thing i would have liked would be a guide on depth to board size recommendations. Thabks Google and Youtube