Milescraft Feather Board for Router Tables and Table Saws
$13.49
Reduce kickbacks by applying proper and consistent tension between a workpiece and the fence of a power tool with the FeatherBoard. Versatile enough to be used in almost any table saw or router application. Includes 5/8 in. and 3/4 in. miter bars and T-slot bolts to work in unison with your power tool.
In stock
Description
Reduce kickbacks by applying proper and consistent tension between a workpiece and the fence of a power tool with the FeatherBoard. Versatile enough to be used in almost any table saw or router application. Includes 5/8 in. and 3/4 in. miter bars and T-slot bolts to work in unison with your power tool.
- Carefully designed feathered fingers apply optimum pressure
- Designed to hold workpieces securely against the power tool’s fence when cutting or mitering
- Ergonomic knobs help prevent over-tightening and are easy to loosen
- Unique pre-load tension design allows consistent cuts with reduced chance of kickback
- Split-rail miter-bar construction provides maximum hold
- Mounting hardware included for nearly any operation
- Made of lightweight high visibility yellow plastic for safety in busy shops
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 2.80 × 8.60 × 10.20 in |
| Material | Plastic |
| Model | 1406 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 10.5 in |
| Router Part/Accessory Type | Template/Guide |
| Tools Product Type | Power Tool |
Reviews (53)
53 reviews for Milescraft Feather Board for Router Tables and Table Saws
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR34124
Woodworking Tool Accessories
Model# 48-08-0260
Woodworking Tool Accessories
Model# DR82116
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Model# DR99035
Woodworking Tool Accessories
Model# DR62XXX
Woodworking Tool Accessories
Model# DR32102
Woodworking Tool Accessories
Model# DR30110
Ali Lang (verified owner) –
Very tough and versatile. I use two on my table saw and router tables to create my own moldings
Brayan Bergnaum (verified owner) –
Plastic is heavy duty, not as flexible as my old featherboard. I am expecting it to be more durable though. Installed easily on a Shopsmith Mark 510 table.
Fidel Kerluke (verified owner) –
Featherboard is a great safety device, and this inexpensive precaution of a Milescraft accessory does the job.
Susanna Block (verified owner) –
Great addition to my table saw. Very helpful when ripping long stock.
Duncan Huels (verified owner) –
Had this for about a month, and it does the job admirably. Not mentioned in the product description, but discernible from the pictures, is the fact that this featherboard can be flipped over to work on either the left or right side of the saw blade. I recommend the Milescraft pusher as a companion tool.
Earnestine Adams (verified owner) –
Not to long ago I didn’t even know what a feather board was. Now I use one constantly on my table saw and router. This one does the job; loads of adjustments. Keeps the work piece in place. Better finished product every time.
Elliott Cassin (verified owner) –
Worked great and price was good
Hilario Luettgen (verified owner) –
Very sturdy tool and holds well.Very good quality for the price.
Brandyn Lueilwitz (verified owner) –
Very easy to setup.
Viva Dickinson (verified owner) –
Decent value, but lining it up to the wood is touchy. The offset slot requires sliding the hold-down bolt. The bolt does not slide easily within the slot – I use a flat blade screwdriver to pry the miter insert arms apart.
Jodie Rempel (verified owner) –
Easy to assemble and very versatile
Zakary Nikolaus (verified owner) –
Nice heavy duty feather board.
Sibyl Waelchi (verified owner) –
I’ve had mine for about a month, and I’ve used it about 10 times to rip 8-foot 1X boards for baseboards and other trip pieces. It’s easy to use and works great. I wish I would have bought one of these years ago.
Lizzie Hodkiewicz (verified owner) –
Comes with miter bars to fit both 5/8 and 3/4 inch slots. Plus it has T-bolts if your tables have T-slots. Nothing else to buy! Fits my old Shopsmith without difficulty. Very sturdy and adjustable to any work piece.
Avis Lesch (verified owner) –
The featherboard works as described. It is a little longer than desirable and probably fits better on a table saw than a router table. Good product for the price.
Leanne Ward (verified owner) –
Excellent workmanship. This is the right tool for working with my table saw. Everyone who works with wood needs one of these in their tool kit.
Kathryne Quitzon (verified owner) –
God for the price…it does the job.
Jordane Predovic (verified owner) –
When I opened the package it had all the parts listed. The 3/4″ miter slot slide was a bit over sized and I had to file it down to get a smooth action without having any tension on the screws. It looks like it will perform satisfactorily but I have yet to use it.
Cordie Schneider (verified owner) –
It did what it was supposed to do!
Meagan Barrows (verified owner) –
Good product. I really liked that both adjustment screws can be used to lock the bar into the miter slot (other brands only one screw locks the bar in the slot).