Milescraft Feather Board for Router Tables and Table Saws
$13.49
Reduce kickbacks by applying proper and consistent tension between a workpiece and the fence of a power tool with the FeatherBoard. Versatile enough to be used in almost any table saw or router application. Includes 5/8 in. and 3/4 in. miter bars and T-slot bolts to work in unison with your power tool.
In stock
Description
Reduce kickbacks by applying proper and consistent tension between a workpiece and the fence of a power tool with the FeatherBoard. Versatile enough to be used in almost any table saw or router application. Includes 5/8 in. and 3/4 in. miter bars and T-slot bolts to work in unison with your power tool.
- Carefully designed feathered fingers apply optimum pressure
- Designed to hold workpieces securely against the power tool’s fence when cutting or mitering
- Ergonomic knobs help prevent over-tightening and are easy to loosen
- Unique pre-load tension design allows consistent cuts with reduced chance of kickback
- Split-rail miter-bar construction provides maximum hold
- Mounting hardware included for nearly any operation
- Made of lightweight high visibility yellow plastic for safety in busy shops
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 2.80 × 8.60 × 10.20 in |
| Material | Plastic |
| Model | 1406 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 10.5 in |
| Router Part/Accessory Type | Template/Guide |
| Tools Product Type | Power Tool |
Reviews (53)
53 reviews for Milescraft Feather Board for Router Tables and Table Saws
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR30110
Woodworking Tool Accessories
Model# DR42102
Woodworking Tool Accessories
Model# DR34124
Woodworking Tool Accessories
Model# DR16116
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Model# 59375
Woodworking Tool Accessories
Milescraft 1-1/2 in. Horizontal Sign Making Letter and Number Set (42-Piece)
Model# 2202
Woodworking Tool Accessories
Bosch 3-1/4 in. Tungsten Carbide Woodrazor Planer Blades for Cutting Wood (2-Pack)
Model# PA1202
Lucile Willms (verified owner) –
The quality is good but it works clunky with the Rigid table saw fence for down pressure. It does work excellent for cutting thin strip edge banding on the table. They need to look at the fence design I was disappointed
Deondre Kemmer (verified owner) –
I bought this because it was one of the few that fit into the 5/8″ channel in my Skil table saw. It does the job without me having to file off the channel groove fittings on the saw.
Isabella Welch (verified owner) –
excellent product! good materials, fits good in skil table saw. great safety device for table saws and router tables.
Darian Gutkowski (verified owner) –
Works great so far
Quinn Reichert (verified owner) –
Exactly what I needed for my table saw.
Erna Runolfsson (verified owner) –
Like all of the Milescraft products I have purchased it is good value for the money, it works and is well made.
Abe Littel (verified owner) –
The tool worked great on my Bosch Table Saw!
Leonardo Simonis (verified owner) –
Very easy to install!
Demond Reichert (verified owner) –
good value
Arvilla Bergnaum (verified owner) –
I have had my feather board for a month and it is exactly what I needed to aid me in the use of my router.
Alfonzo Bernhard (verified owner) –
It is a good and functional feather board and did the job I needed. It would have been better however if it included both a large and small T track guide instead of the single expansion guide. That would have increased its versatility greatly.
Melissa Oberbrunner (verified owner) –
Well made… easy to use
Mertie Mertz (verified owner) –
Easy to use and inexpensive. Have only had it one month but like the way it works.
Melyssa Gislason (verified owner) –
V-shaped slots make for awkward adjustments, metal-on-metal stop design doesn’t hold and had to be careful to crank it down or it would slide when feeding material into saw. Bought more expensive Krieg version and it performs more to my liking
Sandrine King (verified owner) –
Like all of the Milescraft products I have purchased it is good value for the money, it works and is well made.
Mina Berge (verified owner) –
Good price, reasonable delivery. Not sure why the curved slot design is used as it makes adjusting the unit a bit more difficult. Need to twist the adjustment knobs quite hard to lock the unit into the 3/4″ slot. Takes a little practice & getting used to for setting the tension. But like most tools, once you get the hang of it the featherboard works very well to help make better cuts on my table saw.
Ronny Mitchell (verified owner) –
I needed a featherboard for my tablesaw and this seemed to be ‘the thing’. When I received it I found the instructions a bit vague but I worked thru them. The featherboard is a little rough in places but suits my needs. Its’ ease of adjustability is a plus at a reasonable price.There are better ones on the market however, this one is hard to beat for the price.
Jerrell Mills (verified owner) –
It worked as described. Great addition to my ryobi tables, router and saw.
Wiley Bergnaum (verified owner) –
This works OK, but I like my Kreg one better. The curved slot is awkward for me and makes it difficult to adjust–I’m not sure if there’s an advantage to that vs. just having two straight slots, but I don’t like it. On the plus side, it comes with hardware to work with 5/8″ and 3/4″ miter slots.
Meda Braun (verified owner) –
Great Feather Board – Great price! Easy to use, very sturdy and unlike others it comes with the hardware for either miter or t-track applicaiton. As a retired Woodshop teacher I highly recommend this tool.