Milescraft Dual/Tandem Feather Board for Routers, Table Saws and Band Saws
$30.07
Safely and precisely cut boards on edge with exceptional balance and consistent tension using the Dual/Tandem FeatherBoard. Ideal for routers, table saws and band saws. A sturdy spacer is included to adequately guide tall stock through the blade of your power tool while 5/8 in. and 3/4 in. T-slot bolts and miter bars enable the device to work in tandem with nearly any router table, table saw or band saw.
In stock
Description
Safely and precisely cut boards on edge with exceptional balance and consistent tension using the Dual/Tandem FeatherBoard. Ideal for routers, table saws and band saws. A sturdy spacer is included to adequately guide tall stock through the blade of your power tool while 5/8 in. and 3/4 in. T-slot bolts and miter bars enable the device to work in tandem with nearly any router table, table saw or band saw.
- Designed to hold workpieces securely against the power tool’s fence when routing, cutting or mitering
- Ergonomic knobs help prevent over-tightening and are easy to loosen
- Mounting hardware included for nearly any dual or tandem operation
- Unique pre-load tension design allows for consistent cuts with reduced chance of kickback
- Split-rail miter bar construction provides maximum hold
- 3/4 in. and 5/8 in. miter bars and T-slot bolts included
- Slides side-to-side and forward for quick and easy setup
- Made of lightweight plastic and high visibility yellow for safety in busy shops
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 2.50 × 9.20 × 9.00 in |
| Material | Plastic |
| Model | 1407 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 8.4 in |
| Router Part/Accessory Type | Template/Guide |
| Tools Product Type | Power Tool |
Reviews (32)
32 reviews for Milescraft Dual/Tandem Feather Board for Routers, Table Saws and Band Saws
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR38314
Woodworking Tool Accessories
DIABLO 1/2 in. x 5/16 in. Carbide Hinge Mortising Router Bit
Model# DR16560
Woodworking Tool Accessories
Model# DR12156
Woodworking Tool Accessories
Model# DR34128
Woodworking Tool Accessories
Model# DR62XXX
Woodworking Tool Accessories
Bosch 27 in. x 18 in. Aluminum Top Benchtop Router Table with 2-1/2 in. Vacuum Hose Port
Model# RA1181
Woodworking Tool Accessories
Model# 59370
Woodworking Tool Accessories
Model# 59375
Brady Frami (verified owner) –
The Milescraft Feather Board worked well when used to rip boards. I don’t have to clamp a home made wood featherboard to the table saw anymore. The only issue was that the feather board didn’t connect to the fence in order to hold down the boards I was trimming. The featherboard clamp screws didn’t line up with my Ridgid saw fence grooves. .
Trycia Berge (verified owner) –
It works great on vertical boards when creating a tongue or groove using the Dual Feather Board on the table saw. Using a single Feather Board on a horizontal board helps control the cut since you only have to push down and forward and not have to hold it against the Rip Fence. It makes it so much safer because of the added control. Also it stops kickback. Definitely 5 star rating.
Hanna Rowe (verified owner) –
This item can not only be used for a tall or wide tandem feather board, but can also be split into two regular single feather boards. It has 2 sets of 3/4″ miter slot hardware & 2 sets of 5/8″ miter slot hardware as well as T-Bolts for fences that work with them. This the only feather board maker I have seen that has hardware for saws and router tables with 5/8″ miter slot (3/4″ is standard). Many lower end or bench top models now use 5/8″ but few accessories are available for them. You can use this product on any setup I have ever seen. Thanks Milescraft for making and Home Depot for selling such and awesome product.
Augusta Dietrich (verified owner) –
Well designed and works very well. Quality product.
Sylvia Schulist (verified owner) –
good product …..worked perfect ….i ‘d recommend it to anyone….
Norwood Schuppe (verified owner) –
Great accessory to have with a tablesaw. It will fit some bandsaws as well. I’d give it 5 stars if it was easier to adjust.
Karina Blanda (verified owner) –
Fine tool for helping to saw more safely. Works as expected.
Enos Becker (verified owner) –
It is a great accessory for your shop.
Hipolito Hegmann (verified owner) –
Nice set of Feather Boards. They can be used individually or together. You get 2 for one.
Ayana Weissnat (verified owner) –
I like the fact that you can use it stacked or take it apart and have two feather boards for two different machines. Having it delivered to my local Home Depot was cheaper than any other place I looked at!
Yoshiko Hickle (verified owner) –
These featherboards work great!!! So much easier working alone with my tablesaw!!!
Eliezer Kuphal (verified owner) –
Well designed and works very well. Quality product.
Serenity Rolfson (verified owner) –
The FeatherBoard was easy to assemble and mount on my router table. It is a good finishing touch to include in my routing projects.
Alisha Lakin (verified owner) –
Purchased as part of using up a gift certificate because I wanted a featherboard for my RIGID table saw. I have only used one of the boards at a time in the horizontal position. That worked fine. It came with a number of fasteners for various assembly combinations and t-slot configurations. Very little on assembly instructions, so have not figured that out as I have not needed that yet. Non of the slot screws seem to fit my table saw guide so have not figured out how to mount the featherboard vertically yet.
Olin Kshlerin (verified owner) –
Very good system.
Rosa Cronin (verified owner) –
I got more than I thought I would get when I bought this. I bought it primarily to support boards turned on edge through my router table and it works well for that. But I found that It also can be taken apart and used with one horizontal feather board and one vertical. Variety of bolts and tracks allows for many different configurations. Home Depot’s price was much lower than anywhere else that I saw.
Adrien Blick (verified owner) –
Easy setup safe to use
Madalyn Hyatt (verified owner) –
This Feather board can be used in tandem or each alone for table saw and the fence.
Kirstin Schimmel (verified owner) –
Good product. Sturdy and we’ll built.
Electa Ledner (verified owner) –
I have not used the item yet Looks good