Milescraft Angle Finder for Miter Saws
$9.99
The Angle Finder can find the angle of an inside corner and an outside corner. It features precise angle measurement readout to. This tool is great for crown molding projects and many other household projects.
In stock
Description
The Angle Finder can find the angle of an inside corner and an outside corner. It features precise angle measurement readout to. This tool is great for crown molding projects and many other household projects.
- Retractable edge guides for layout
- Finds angles between two points on inside or outside corners
- Angle divider for easy miter-saw setup
- Notches for holding bar clamps upright when framing
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Additional information
| Dimensions | 8.00 × 5.00 × 2.25 in |
|---|---|
| Hand Tool Type | Multi-tool |
| Model | 8402 |
| Primary Use | Finding Angles on interior and exterior corners and transferring to miter saw |
| Tools Product Type | Hand Tool |
Reviews (35)
35 reviews for Milescraft Angle Finder for Miter Saws
Only logged in customers who have purchased this product may leave a review.
Related products
Specialty Hand Tools
Model# 88906
Specialty Hand Tools
Model# 3260
Specialty Hand Tools
Model# 3261
Specialty Hand Tools
Model# #14-14
Specialty Hand Tools
Model# 86570
Specialty Hand Tools
Model# 750
Specialty Hand Tools
Southwire 3K Cable Puller (No Motor) Includes Adaptors and PC100
Model# 57143101
Specialty Hand Tools
Model# 3256
Zoe Donnelly (verified owner) –
This gadget is easy to use, and earns its price with the first application. Best thing since sliced bread!
Nellie Schinner (verified owner) –
This simple tool makes the job so easy! Perfect for first time DIY ers,no math needed, great product for the price.
Gaylord O’Hara (verified owner) –
This is a very handy tool. It saves much time getting your miter saw set at the correct angle.
Hertha Breitenberg (verified owner) –
Simple tool but very useful. I would’ve rated it 5 stars if it had angle indicators.
Peter Barton (verified owner) –
simple to use and very accurate, wish I bought this years ago.
Orland King (verified owner) –
Great tool to have……………………. …..
Marie Stehr (verified owner) –
Overview use/audience: Used to find inside and outside angles to make miter cuts.My Experience: If you’ve ever made miter cuts for molding or angle cuts for projects you quickly realize nothing is ever truly square and that a 45 degree cut. You’re left using wood filler in the gaps or trying to tweak your cut for a better fit. Enter an angle finder.This allows you to evenly measure an angle and then make an accurate cut with your miter saw.I was adding a support for some storage in a shed converted to a craft room. The shed is old and has shifted and I knew a 45 degree cut was going to have gaps. Instead, I put the angle finder on one support at the height I wanted my support and using a level on top of the AngleFinder set it at the point where it was level. I think set the AngleFinder on stop of my 2×4 and made a line of the angle on it. That gave me one angle. Then I measured the length of my support and marked that length on the stud. Then I took the angle of the other side and drew that line making sure the line intersected the longest length.My angle was not clearly marked on the indicator but I was able to use the rough angle and the line I drew to line the miter saw up. The result was a perfect fit when I drilled my pocket holes and fit the board up!Pros:- easy to use & accurate results using my method above (drawing a line of the angle not trying to use the indicator on the AngleFinder)Cons:- trying to use the angles listed on the tool is difficult if your angle doesn’t match up; not precise enoughFinal Verdict: Way easier than trying to hold a board and mark it.
Jacey Moore (verified owner) –
Does all that it says it does. Easy to use and set saw angle to the exact angle needed for your cuts . I do recommend .
Keanu Beier (verified owner) –
Meets or exceeds all of my expectations. Very good quality for price.
Clyde Paucek (verified owner) –
Accurate & easily finds the correct center position.
Christa Rohan (verified owner) –
Easy to use,
Yasmin Schoen (verified owner) –
Works like a fricken charm for those of us who do not live by the miter saw but the results make it appear as though we do.
Abdiel Rolfson (verified owner) –
It works just like it said it would I would recommend it
Kennedi Morissette (verified owner) –
nice tight gearing makes for solid settings. slots in handle allow bar clamps to hold in place. The yellow part that touches the miter saw blade is hollowed out , so I filled it with epoxy and added a 1/4″ rare earth magnet to hold tight to the miter saw blade.
Rod Muller (verified owner) –
Tool is great if you’re careful. I love the concept, but the locking mechanism isn’t perfect. You have to be careful when your using the tool to position the saw blade. If you bump the blade into the tool, it can cause the angle to shift. Then you have to start over and reset the tool.
Bret Ebert (verified owner) –
All it said it was!
Angela McKenzie (verified owner) –
love this thing
Shayne Cremin (verified owner) –
This Angle Finder works great Made my job a lot easyer
Marjorie Murphy (verified owner) –
This product served the exact purpose as to why I purchased it for. I received it 5 days before the exact estimated date. I work for a competitor of Home Depot and buy stuff from both companies. I am pleased with both companies. One company sells stuff that the other does not.
Brain Bayer (verified owner) –
I have slowly been replacing my fascia boards but have avoided the peaks because they are a bit more complicated with odd angles and a compound miter to give architectural detail. I did one with out this and it was a pain getting everything to match. I pulled another one down this weekend and used this to just copy the angles and it worked perfectly. So much less work than last time. It has an easy to use cam lock to hold it in place once you set it and some pop out wings to use it along the edge of a board if you need. Probably not a tool I need often but when you do it saves so much time and frustration.