Milwaukee 8 Amp 1/2 in. Magnum Drill
$123.67
Milwaukee Magnum Drill is built to handle industrial and construction applications with ease. Comes with locking side handle.
In stock
Description
The Milwaukee 1/2 in. Magnum Drill delivers up to 850 RPM with its 8 Amp motor. This drill features variable speeds to best suit your preferences and the project on which you are working. Its all-metal gear case and diaphragm protect the drill to help extend its life.
- Includes one 1/2 in. magnum drill, 1 keyed chuck with holder and 1 side handle
- Heavy duty keyed chuck for strong gripping to keep the bit in place
- 360° locking side handle with an ergonomic textured grip for comfort and control
- Lightweight design for a great power-to-weight ratio
- 2-finger trigger for added user comfort and balance
- 8 ft. 3-wire fixed rubber cord for extended reach
- 5-year limited manufacturer warranty
- All-metal gear case and diaphragm for durability
- 8 ft. 3-wire rubber cord for extended reach
- Red exterior for a bright appearance
- Includes: (1) 0299-20 1/2 in. magnum drill, (1) chuck key with holder, (1) side handle
Additional information
| Weight | 5.9 lbs |
|---|---|
| Dimensions | 3.13 × 13.00 × 9.75 in |
| Amperage (amps) | 8 |
| Chuck Size | 1/2 In. |
| Chuck Type | Keyed |
| Color Family | Red |
| Condition | New |
| Cord Length (ft.) | 8 |
| Cordless/ Corded | Corded |
| Drill/ Driver Type | Drill/ Driver |
| Included | Second Handle Included |
| Maximum Speed (RPM) | 850 RPM |
| Model | 0299-20 |
| Power Tool Features | Forward/Reverse Switch, Variable Speed |
| Tools Product Type | Power Tool |
Reviews (55)
55 reviews for Milwaukee 8 Amp 1/2 in. Magnum Drill
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
Milwaukee 13 Amp Corded 1/2 in. Super Hawg Hole Hawg Right Angle Drill Driver
Model# 1680-20
Drills
Model# 0302-20
Drills
Model# 285703
Drills
Model# 1007-1
Drills
Milwaukee 7 Amp Corded 1/2 in. Corded Right-Angle Drill Kit with Hard Case
Model# 3107-6
Drills
RIDGID 6.5 Amp Corded 1/4 in. Heavy-Duty VSR Drywall Screwdriver
Model# R60002
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversible Hammer Drill
Model# DW511
Bailee Dach (verified owner) –
product was as advertised
Johnathan Nitzsche (verified owner) –
This drill has performed as needed and seems to not have any issues drilling with large auger bits and holesaws.
Vince Cummings (verified owner) –
I have always liked Milwaukee brand. I only give it 4/5 stars because I’ve only had it a short while and not long enough to have evaluated it for top marks.
Keyon Hudson (verified owner) –
I’ve only used this once but it was impressive. My cordless 1/2 drill couldn’t drive a 1/2 inch spade bit through 4 inches of very old, tough, rough pine. Put this baby on it and the hole was done in less than a minute. Just the right RPM for most drill work. It’s well balanced and a bargain at $129.
Lavonne Torphy (verified owner) –
very good milwaukee has always had good products 5 stars
Daniela Klein (verified owner) –
Drill works great!
Olaf Brakus (verified owner) –
I purchased this drill for use in a Welding and Fabrication Shop. It received extreme heavy duty use. The drill performed very well. It was the only brand we found that held up under our heavy duty use.This drill should work for anyone if it worked for my fabguys under these difficult work conditions. I am sure you will be satisfied with the performance of this well-designed product.
Rhianna Spencer (verified owner) –
I bought this a couple years ago and used it on numerous wood projects. Predominantly for wood screws. The slow speed and torque made a very very good combination to seat 3″ and 4″ #8 wood screws WITHOUT stripping the head out. This was used many times for eagle projects and worked 12hrs a day.I liked the handle, its angle made for easy 1 hand operation to drill the screw straight while the other hand held the board in place. I liked its ability to take a screw down below the surface with just a touch up, unlike smaller 3/8 drill you have to back it out and run it back down. I really liked this drill.It has so much torque that while driving a large (#12 screw) to attach a caster, the screw hit bottom and the drill twisted out of my hand and fell. A brush broke, not something I’ve ever experienced before.If I were a professional this would be a real good daily use tool. My problem was I broke easy. First the brushes and then the motor. The brushes were very easy to replace and available at low cost. I was able to buy a new armature but it needs a press to be installed. I wish it lasted longer.
Pamela Miller (verified owner) –
Plenty of power and torque. Make sure you get some quality bits, because this is a quality gun. Feels a bit heavier than other 1/2” drills i’ve owned.
Janiya Mosciski (verified owner) –
This drill has performed as needed and seems to not have any issues drilling with large auger bits and holesaws.
Alexzander Nolan (verified owner) –
Excellent drill for both small and large jobs.
Raoul Fadel (verified owner) –
Does the job I needed it for.
Cora Kiehn (verified owner) –
I have a significant number of Milwaukee tools and they always exceed my expectations and construction requirements.
Beth Goyette (verified owner) –
I bought this a couple years ago and used it on numerous wood projects. Predominantly for wood screws. The slow speed and torque made a very very good combination to seat 3″ and 4″ #8 wood screws WITHOUT stripping the head out. This was used many times for eagle projects and worked 12hrs a day.I liked the handle, its angle made for easy 1 hand operation to drill the screw straight while the other hand held the board in place. I liked its ability to take a screw down below the surface with just a touch up, unlike smaller 3/8 drill you have to back it out and run it back down. I really liked this drill.It has so much torque that while driving a large (#12 screw) to attach a caster, the screw hit bottom and the drill twisted out of my hand and fell. A brush broke, not something I’ve ever experienced before.If I were a professional this would be a real good daily use tool. My problem was I broke easy. First the brushes and then the motor. The brushes were very easy to replace and available at low cost. I was able to buy a new armature but it needs a press to be installed. I wish it lasted longer.
Elijah Rath (verified owner) –
I Bought my first Magnum in the 90″s And it’s used in a small fab shop! It’s still working . got this one as a backup
Rogers Batz (verified owner) –
I use one of these drills at work for drilling holes in steel plate. This thing is an arm breaker if you are using a large bit in a heavy drilling application and the bit sticks. The amount of torque this thing makes is scary. Its the first drill I have ever seen that will snap a 1″ drill bit without hesitation. I have used lots of drills, but this thing is King. Durability of this drill is also out of this world. I have used it to punch holes through 1′ thick plate with 1″ or larger bits, and it never quits. I am buyin one of these for home use!
Eva Schumm (verified owner) –
I bought this milwaukee drill to end my 5 hour frustration with a cordless drill. Needless to say, this beast took care of the “5 hour” job in less than 5 minutes. Paid for itself in less than 5 minutes, highly recommended!!!
Bernardo Okuneva (verified owner) –
Best for steel and wood, use it every day. Works great with a 4 1/2″ hole saw, and a 1 1/2″ bit
Ivy Harris (verified owner) –
I bought the mag as a xtmas gift for my son to use We use nothing but milwa. tools at work and we are always pleased with them Thank you for your tools
Kara Lebsack (verified owner) –
Very durable and plenty of power.