The M12 Hex Right Angle Impact Driver is the ultimate solution for jobs demanding extreme power and speed in the tightest spaces. With a 1.4 head diameter, and the ability to use with most 1 insert bits, the M12 Hex Right Angle Impact Driver offers users maximum access for hard-to-reach fasteners. The tool provides the most power and highest RPM in its class, and is optimized to run at full speed throughout the toughest applications. Variable speed with an extended paddle switch provides tradesmen complete control, and the ability to operate their tool from multiple grip positions. Get maximum life out of the M12 Hex Right Angle Impact Driver. Powered by REDLITHIUM Battery Pack which delivers more work per charge and more work over pack life than the competitors. REDLINK Intelligence provides optimized performance and overload protection against abusive situations.
- Best-in-class power and speed with 600 in. lbs. of torque and 0 – 2,150 RPM
- Offers users maximum access for hard-to-reach fasteners
- Extended paddle switch for multiple grip positions
- Provides the most power and highest RPM in its class
- Variable speeds provides maximum control for any job
- Torque- 600 in-lbs
Jaylen Harris (verified owner) –
5 STARS
Clemens Collins (verified owner) –
Great versatile tool.
Lempi Kutch (verified owner) –
Great tool works wonders for me
Danyka Block (verified owner) –
Yes it did hit all my marks!
Muriel Bergnaum (verified owner) –
Love this tool!! Hvac Tech. Fits so many places my m12 imacy does not. Was a little worried about power in/lbs. But It gets the job done. It works great for the work I do. Alot of 1/4″ and 5/16 sheet metal screws so i use nut drivers. And it can run a 3″ deck screw in. I would not say its powerful enough to use to do much on Cars like maybe 10 mm and 12mm stuff but thats it. Good tool tho. And I use it alot. FITS EVERYWHERE!!! BEST PART.
Lucas Kshlerin (verified owner) –
Pros it is awesome for those tight spots and has plenty of power, love this little toolCon not a “fuel” motor
Reanna Weissnat (verified owner) –
Excellent angle driver. Plenty of power. I like the trigger being variable for the speed of the chuck. Would recommend!
Bridgette Homenick (verified owner) –
Great Tool! It Exceed My Expectations, Easy to Use in Hard to Reach Area
Grant Mertz (verified owner) –
Excellent tool. Able to get into tight spaces with the power necessary to drive 5/8×6 in. screws into KDAT lumber. Easy to handle and with a large trigger to allow a variety of hand positions. Only 2 suggestions: a bit lock like the one on the Surge tool that does not require the collar to be pulled out and a brushless motor for longer run time.
Giovanni Lind (verified owner) –
Made my day. Anytime I need to get a bracket into a tight spot, I no longer sweat it. Great tool my angle drill is now used for drilling.
Alec Zboncak (verified owner) –
Good for tight spots. Use it daily
Brandi Morissette (verified owner) –
far exceeded my expectations for a 12v impact driver. Bought this to drill thru 2×4’s in a wall. worked great!
Matilda Robel (verified owner) –
It is powerful and easy to use
Tiara Nikolaus (verified owner) –
Perfect for tight spaces
Guiseppe Graham (verified owner) –
All the power, capacity, and utility I hoped for and more. The only improvement I’d make is to have the bit lock ring pull towards the tool instead of away to get the bits out.
Kailyn Thompson (verified owner) –
Awesome Product!…This is one of the best tools for all occasions. Solid build and reliable.
Sandrine Schoen (verified owner) –
Great for tight areas.
Dayne Ratke (verified owner) –
Great drill. Smaller than the Dewalt Version.
Christian Keeling (verified owner) –
Opted for this over a right angle drill. It doesn’t get used a lot, but when you’re in a pinch and need it it does much better job than a right angle drill and even the right angle drill attachment. It’s one solid tool versus some awkward, multi piece setup.It has its benefits over the drill as without the chuck it can fit in tighter corners, and you don’t need as much down pressure as you would using a drill. The impact feature is good but when switching from an M18 impact driver it leaves you wanting more, but is enough to get the job/task done.OTHER THOUGHTS: Wish it was a FUEL brushless model. Wish it didn’t cost as much (typical cost for milwaukee tool). Wish it had an LED at the tip of the tool, as when you’re working in tight corners you really need the light at the tip. Really should come with a hard case at this price
Lincoln Willms (verified owner) –
Powerful tool for tight spots.