Milwaukee M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 4-in-1 Installation 3/8 in. Drill Driver and Multi-Tool Set (Tool-Only)
$299.00
Do all your hardest work easily with this amazing Milwaukee M12 FUEL Lithium-Ion Brushless Cordless 4-in-1 Installation Drill Driver and Multi-Tool Set.
In stock
Description
The Milwaukee M12 FUEL Installation Drill/Driver features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in.-lbs. of maximum torque. 4 dedicated heads, including a 3/8 in. Chuck, Offset Driver, 1/4 in. Hex, and Right Angle, can attach in 16 different positions. This provides users with a 4-in-1 drilling and driving solution that is purposefully designed to reach challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits. These unique features combine with the tool’s compact size and weight enabling users to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. M12 FUEL Oscillating Multi-Tool generates the fastest 12-Volt cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The POWERSTATE Brushless Motor delivers 10,000 OPM to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12-Volt competitor. The vibration isolating tool design minimizes vibration making their cuts more comfortable with less fatigue.
- Includes: installation drill/driver (2505-20), 4 dedicated solutions (3/8 in. chuck, 1/4 in. hex, offset, and right angle), belt clip, and compartmentalized contractor bag and M12 FUEL oscillating multi-tool (2526-20)
- Offset attachment provides ultimate access to tight corners and will not damage or mar finished materials when fastening
- Right angle attachment provides efficient fastening and/or drilling at 90° for unrivaled access in tight spaces
- All metal 3/8 in. chuck and 1/4 in. hex attachments add to user productivity by delivering the versatility to efficiently perform most drilling and fastening applications
- Magnetic bit holder holds multiple bits on board to save time when switching accessories
- 5.12 in. W and only 2.0 lbs. with battery attached
- Inline grip allows for maximum tool control and easier access to hard to reach places
- Top of tool is flat, allowing for easier drilling/fastening when tool is flush to a surface
- 1/4 in. hex, 3/8 in. chuck, and offset attachments connect to right angle attachment for added versatility when drilling and fastening at a right angle
- POWERSTATE Brushless Motor delivers 300 in.-lbs. of max torque
- Attachments connect in 16 different positions for access at almost every angle
- Belt clip attached
- Compatible with all M12 batteries
- Compartmentalized contractor bag allows for easy attachment organization and tool mobility
- M12 FUEL oscillating multi-tool has a 12-setting dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility
- Oscillating multi-tool delivers 10,000 OPM to 20,000 OPM to provide the fastest speed of cut on a 12-Volt platform
Additional information
| Weight | 1.8 lbs |
|---|---|
| Dimensions | 4.21 × 14.88 × 9.69 in |
| Battery Amp Hours | No Battery |
| Included | Attachments Included, Bag Included, Belt Clip Included |
| Voltage (v) | 12v |
| Tools Product Type | Power Tool |
| Power Tool Features | Brushless, Forward/Reverse Switch, Keyless Chuck, LED Light, Sub-Compact, Variable Speed |
| Number of Total Batteries Included | 0 |
| Number of Tools Included | 2 |
| Motor Type | Brushless |
| Model | 2505-20-2526-20 |
| Maximum Speed (RPM) | 1600 RPM |
| Drill/ Driver Type | Drill/ Driver |
| Battery Power Type | Lithium Ion |
| Cordless/ Corded | Cordless |
| Cordless Tool Type | Drill/Driver |
| Condition | New |
| Color Family | Red |
| Chuck Type | Keyless |
| Chuck Size | 3/8 In. |
| Charger Included | Charger Not Included |
| Battery/Charger | Tool Only |
| Battery Size | 12-volt |
| Voltage (volts) | 12.0 |
Reviews (36)
36 reviews for Milwaukee M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 4-in-1 Installation 3/8 in. Drill Driver and Multi-Tool Set (Tool-Only)
Only logged in customers who have purchased this product may leave a review.
Related products
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversing Drill
Model# DW235G
Drills
Milwaukee 7 Amp Corded 1/2 in. Corded Right-Angle Drill Kit with Hard Case
Model# 3107-6
Drills
Model# 0233-20
Drills
DEWALT 2500 RPM Variable Speed Reversing All-Purpose Screw Gun
Model# DW257
Drills
Model# DW272
Drills
DEWALT 7.8 Amp Corded 1/2 in. Variable Speed Reversible Hammer Drill
Model# DW511
Drills
Model# 1007-1
Everardo Heidenreich (verified owner) –
Bought this to just keep in the truck so I’d have it when i needed it and didn’t have my M18 with me. Very handy. Carry case is nice. Wish it had just a hair more torque. but I’ve only encountered one application that it struggled but still finished the job.
Lucy Bogan (verified owner) –
Light weight well built. Great tool
Myron Rippin (verified owner) –
Tired of coming at screws in a tight corner or flush up against a bulkhead or other obstacle and being 20 or more degrees off center due to the bulky design of the drill. The offset bit driver attachment easily takes care of most of these issues and wont scratch the material around it. The other interchangeable heads make for a quick swap between tools without the need to carry two or more tools with you. Also the magnetic strip on the front of the bit driver holds 6 apex bits to make swapping from your trusty No. 2 phillips bit to a torq-set, allen head, torx or other apex bit a breeze. Its got enough torque even being a 12V. However, incase oden installed the screws last time it automatically locks the drive when you release the trigger so you can give it a little bit more umph in or out. If i could change one thing about it, it’s a little loud while its spinning but the clutch is quiet. Pick your poison, its the best jack of all trades I’ve found and for under $200 you would be silly to not give it a shot. I’ve also tried the equivalent Bosch system and the pros and cons equal out if you ask me.
Patrick Kohler (verified owner) –
Good design, easy to carry.
Theo Walker (verified owner) –
Once again Milwaukee comes through with another great tool! I bought it for the right angle attachments. I’ve already performed a couple of jobs where my normal m12 drill and screw gun wouldn’t have been able to reach! Well worth the money, l definitely recommend this product!
Barry Becker (verified owner) –
This item helped so much on my projects. I would recommend this product to anyone.Thanks Milwaukee!
Leonardo Fritsch (verified owner) –
My husband loves it and was very impressed by it
Eleanora Schinner (verified owner) –
First I want to address the very common complaint about the direction switch location. It is in the correct place, the engineers placement was well thought out, it’s not a regular drill/driver so why design it as such. The top switch is at the top because it’s a C style drill, its ment to be held with the middle finger as your trigger finger, gripping the gun at the top with the pointer and thumb, like you would hold a drywall gun. When held properly it is more comfortable to change directions. A quick trigger pull will illuminate the direction the drill is in if you put it down and forget what direction its in. I feel as though other reviewers give the tool a bad name because they are either using it for tasks it’s not designed to complete, or they are using/holding it in a fashion it was not designed to be used/held. Now the case, i feel like this is a controversial subject. It mostly depends on each individual person….. if you are like me all of the plastic molded cases go straight to the pile of empty cases that came with all my other tools anyway, if it’s a bag, bags can be repurposed for other things. If you are the type that likes a plastic case and its important to you than this case is not desirable. But I personally have no gripe with the case. I have zero complaints about this tool. It’s my go to for every installation I do, from cabinets to windows and doors. Its comfortable, versatile, tough, well balanced, and has plenty of power for the tasks it is designed to do. This is a purpose built tool with well thought out ergonomics and design.
Tania Pfeffer (verified owner) –
so far very happy with this unit the reason I only gave it four stars they really haven’t had the opportunity to use this tool yet overall I’m satisfied with the build quality feeling well put the gather at the top just like if you were using an impact driver and putting in a bit.
Israel Beahan (verified owner) –
This drill is great to use and has lots of power. The different heads make it easy to get into tight spaces when installing cabinets or anything else. Very lightweight and lots of power behind it.
Sabryna Schimmel (verified owner) –
Light and compact very useful in tight areas.
Ola Sawayn (verified owner) –
Very handy smaller drill than my M18 drills
Aleen Bernier (verified owner) –
Best drill ever !
Jessika Hessel (verified owner) –
Better than I expected. Great internal/mechanicals. Feels solid when driving fasteners or drilling into wood or metal. The offsets chucks have been invaluable. Kudos to Milwaukee for designing a unique tool for unique applications where a regular impact or drill/driver doesn’t quite line up to do the job right. Also amazed it is a 12v for the precise torque it outputs. This is becoming my new Go-To for DIY and work.
Marianna Bode (verified owner) –
Compact, light and strong. Angle attachment comes in super handy!
Randy Bruen (verified owner) –
This is the best tool I got from Milwaukee.