Milwaukee M12 FUEL 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool Kit with 4.0 Ah Battery, Charger, Accessories and Tool Bag
$219.00
Bring a magnificent tool to fulfill your cutting needs in the home or jobsite by selecting this Milwaukee M LithiumIon Cordless Oscillating MultiTool Kit with Battery Charger Accessories and Tool Bag
In stock
Description
The MILWAUKEE® M12 FUEL™ Oscillating Multi-Tool Kit generates the fastest 12V cut speed, lowest full-tool vibration, and delivers tool-free blade change for faster accessory changes and no misplaced tools. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM while maintaining its speed under load better than the competition to provide the fastest cuts of any 12V competitor. The vibration isolating tool design minimizes vibration making their cuts more comfortable with less fatigue. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The M12™ REDLITHIUM™ XC4.0 battery delivers most work of any 12V battery on the market. The M12 FUEL™ Oscillating Multi-Tool has a 12-Setting Dial allowing users to adjust the speed to the application, and an integrated LED light for maximum visibility.
- Oscillating Multi-Tool delivers 10,000 to 20,000 OPM to provide the fastest speed of cut on a 12V Platform
- REDLINK PLUS™ Intelligence: Most advanced system of electronics in the industry, enabling communication between batteries and tools, allowing for unmatched levels of performance, protection, and compatibility.
- REDLITHIUM™ Battery Pack: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack lifespan than any battery on the market.
- Tool Free Blade Change for Faster Accessory Changes
- Variable Speed Dial to Allow Users to Adjust the Speed to the Application
- LED Light for better Visibility in Low-Light Situations
- Oscillation Angle: 3.9 Degrees for Faster Cutting
- Vibration Dampening Technology for Lowest Full Tool Vibration
- Compatible with all M12™ Batteries
Additional information
| Weight | 2.296 lbs |
|---|---|
| Dimensions | 4.06 × 9.17 × 15.07 in |
| Accessory Change System | Tool Free |
| Cordless/ Corded | Cordless |
| Tools Product Type | Power Tool |
| Power Tool Features | Attachments Included, Bag Included, Keyless Chuck, Variable Speed |
| Oscillations Per Minute (OPM) | 10, 000-20, 000 |
| Oscillation Arc Range (Degrees) | 3.9 |
| Number of Total Batteries Included | 1 |
| Number of Batteries Included | 1 |
| Motor Type | Brushless |
| Model | 2526-21XC |
| Cordless Tool Type | Oscillating Tool |
| Accessory Compatibility | Accessory Adapter (Included): Compatible with most competitive accessories |
| Condition | New |
| Color Family | Red |
| Charger Included | Charger Included |
| Battery/Charger | 1 Battery & Charger Included |
| Battery Size | 12-volt, M12 |
| Battery Power Type | Lithium Ion |
| Battery Amp Hours | 4.0 |
| Batteries Included | Yes |
| Voltage (volts) | 12 |
Reviews (75)
75 reviews for Milwaukee M12 FUEL 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool Kit with 4.0 Ah Battery, Charger, Accessories and Tool Bag
Only logged in customers who have purchased this product may leave a review.
Related products
Power Multi Tools
Milwaukee M12 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool (Tool-Only)
Model# 2426-20
Power Multi Tools
Dremel Dog Nails 7300 Series Cordless Pet Nail Grinder Rotary Tool with Charger and Accessories
Model# 7300-PT
Power Multi Tools
Model# 3000-1/25H
Power Multi Tools
Milwaukee M12 12-Volt Lithium-Ion Cordless Rotary Tool Kit w/(1) 1.5Ah Battery, Charger, Tool Bag
Model# 2460-21
Power Multi Tools
Dremel 7000 Series 6-Volt Alkaline Dual Speed Cordless Rotary Tool with 5 Accessories
Model# 7000-N/5
Power Multi Tools
Dremel 200 Series 1.15 Amp Dual Speed Corded Rotary Tool Kit with 15 Accessories and 1 Attachment
Model# 200-1/15
Power Multi Tools
Model# 1008
Power Multi Tools
Dremel 100 Series 0.9 Amp Single Speed Corded Rotary Tool Kit with 7 Accessories
Model# 100-N/7
Nicole Bins (verified owner) –
Nice oscillating saw. I have a corded Fein, a cordless Ryobi and an old HF Chicago electric. I decided to try cutting the same piece of scrap with the same blade in all of them and see if there was a difference in speed. I first tried a 1×2 but the Milwaukee cut it so fast I decided to try something bigger. So I cut a 2×4 scrap. That took about 15 seconds with this Milwaukee and the corded Fein. It took at least twice as long as the Ryobi and the HF took well over a minute. The HF and Ryobi would bog down but the Milwaukee and Fein just sailed through the cut. This tool also has a tool less blade change that works pretty well but I like the Fein a little better. They are similar with a top handle you pivot to unlock the jaw but the Fein just pulls out, you have to unthread the Milwaukee. But it doesn’t take long and I could do it with my fingers. The Milwaukee also has 6 little protrusions to hold the blade and the others had only 4. The Milwaukee is also the only one with magnets to hold the blade until you get it fastened down. I then cut a hole for an electrical box with the Milwaukee and it did it well. The hole was in half inch plywood. It is a good tool. To have power comparable to a corded Fein in a cordless is saying something – and it’s only 12V. Good tool.
Tyra Rohan (verified owner) –
Bought it for my husband and he is happy with it
Janie Yost (verified owner) –
I use it and it’s an upgrade from previous design. Its quick blade installation and highly recommended.
Zelda Goodwin (verified owner) –
If you are going to be late to the party, bring a great cuisine not napkins. I feel like this is a trend here, where they are late to the party and the tools are missing major features that others have, while introducing something minor.This is a great tool, the lack of a quicker tool changing mechanism is puzzling to me. It is a tool free system, but not hassle free. My other multi tool allows me to change the blade in about 3 seconds if that. This takes about 20 seconds or so, as you have to push the lever up unscrew the bolt, then rescrew it. There are magnets that help stabilize the blade as you change it. Although this one is friendlier on your thumbs, whereas the others I almost sprained my thumb as I did not apply enough tension to hold it openNowadays when I get a Milwaukee tool my first thought is what packout will I need. This will fit into the small organizer one. I have only 2 bins in there which work for the accessories. I used this tool to create a notch in a piece of 2x also to remove nails. When removing nails, I would not recommend the bi metal Titanium tip use the Carbide tip blade( sold separately). With the carbide I went through several nails and the teeth are still intact. Whereas after 3 the Titanium need to go to the dentist, lost some teeth.I love that you do not have to squeeze a trigger, you can set it and forget it with the on/off switch. Changing speeds is simple, turn dial. For my hands, I would have liked it if the power switch was higher up, where my thumb rest while holding it so I can turn it off /on effortlessly.The LED stays on for 10 seconds after you power down the tool. Just when I thought it could not be anymore troublesome to remove an M12 battery, this comes along. There is rubber molding inside the battery compartment which ensure a nice snug fit, and probably absorbs some vibration but it also adds to the burden of removing the battery. All in all great tool.
Larry Langworth (verified owner) –
Amazing tool. Had the original 18V and this tool is better. Can not wait to get the 18V fuel version.
Lelia Gaylord (verified owner) –
This 12 volt seems to be more powerful than the 18 volt, Truly, and less vibration for sure, way to go Milwaukee!
Blanca Kohler (verified owner) –
Have waited for the second gen tool. Well worth the wait. Works great when using quality blades.
Christa Schaefer (verified owner) –
Works better than expected. I have used as finishing sanding of a 60 year old wooden doll cradle. This has cut sanding time by more than half.
Katrina Price (verified owner) –
The m12 fuel multi tool is awesome. Used my brothers m18 fuel before this new model came out and it was so helpful. Removed all the high bond 3m adhesive from my project like butter! It did however vibrate a lot. Received my m12 fuel with the new vibration reduction and man what a difference. Super smooth and longer comfort. Not a single complaint from this tool and am proud to add it to my Milwaukee line up. 100% recommend to everyone.
Eino Leannon (verified owner) –
If I could give this thing 10 stars I would. I upgraded from a corded inexpensive multi tool to this and the difference is night and day!I have used this every day for the past month just because it is so easy to set up and start using in seconds. I love that I don’t have to have an Allen wrench with me to change to a new blade!I also used this to sand a vanity I just made and it got into all the hard to reach areas that my oscillating sander can’t reach! It also EATS wood while sanding so go easy with it! On its highest setting with the wood cutting blade from Milwaukee it can cut through 2x4s and 2x6s in seconds! I also got a ton of other blades and scrapers to use with it and it handles them all.The vibration is also very minimal on this multi tool compared to my last and is my favorite feature, I can barely feel it even on higher settings and it helps me cut straighter and with more accuracy.I highly recommend Milwaukees new FUEL multi tool and all their attachments! But make sure you have a spare battery or two if you have a large project. This will be one of your favorite new tools, it can do so much and handles itself like a much larger corded tool!
Francisco Ferry (verified owner) –
Pretty awesome tool..
Kurt Sipes (verified owner) –
Love this tool use it daily!! Small contractor and do remodels come in handy for every project!!
Maude Yost (verified owner) –
I bought this after reading all the hype about the new M12 Fuel Multi Tool. Compared to my teal which is a workhorse, this one is definitely faster, no doubts. However, this has a more aggressive cutting angle and brushless motor, so increased cutting speed is of no surprise. What is surprising for a premium M12 tool though, is its non-ruggedness. After 5-6 test cuts on studs, the dust is everywhere inside the tool. Look at the photo! The sawdust is even blocking the LEDs from inside! Is that for real, Milwaukee?? Also, the battery insertion/removal is a pain. This is a tool that someone would intend to use with CP batteries for the compactness, portability, and maneuverability, but there’s no way to do a quick battery change once the CP battery is out of juice. Probably the battery clips are going to fail at some point. In summary, this is a strong tool, but I doubt its longevity because of the poor manufacturing of the housing. Kind of a regret really, and will be going back to my dust-proof and overbuilt teal multi tool..
Terrell Fisher (verified owner) –
I have the older m12 multi and decided to upgrade for a flooring project that was underway. The tool worked perfectly and the floor came out great. Thanks Milwaukee
Phyllis Barrows (verified owner) –
It’s great tool, can cut with presition. Don’t to heavy easy to handle, perfect for drywall.
Isabel Gleason (verified owner) –
If u have the old one throw it out. This one is a beast in comparison.
Destinee White (verified owner) –
This is a review of the Milwaukee M12 FUEL 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool Kit with 4.0 Ah Battery, Charger, Accessories and Tool Bag. I really like the improvements made to this tool. I have the previous version, and this one is so much easier to change the blades on. You don’t need a specific hex wrench any more. You can change the blades with any flat item, even a dime. There is an LED light which is nice. I was pretty surprised how much bigger the new tool is. The head is significantly bigger. I do like the rubber around the body that makes it much easier to grip. The new tool seems a little quieter and a lot smoother when running.
Brody Schoen (verified owner) –
It very big for a 12v. I didn’t expect it to be that large. Like the 12v hacksaw, it’s the 18v set up for 12v battery. Still everything they mentioned, but I’ll have to get the old 12v for my smaller detail work. Unless your scraping glue off floors I don’t see the need for the 18v, this 12v should cover it.
Ettie Wuckert (verified owner) –
Excellent tool well designed and powerful. Great for door jambs and trims and many other areas. Great tool to add to the Collection. M 12 fuel oscillating multitool kit
Trisha Smith (verified owner) –
Great for the power and that it’s have the size of the new Milwaukee m18 fuel multipurpose tool but that M 12 few multipurpose tool is nice